The TSEC_FIBER flag should be set when a PHY is operating with an external fiber interface. Currently it is only used to notify a user that the PHY is operating in fiber mode.
A short description was also added to the other TSEC flag defines so that it is clear how they differ from one another.
Signed-off-by: Peter Tyser ptyser@xes-inc.com --- drivers/net/tsec.c | 6 ++++-- include/tsec.h | 6 +++--- 2 files changed, 7 insertions(+), 5 deletions(-)
diff --git a/drivers/net/tsec.c b/drivers/net/tsec.c index 2f41024..618dadd 100644 --- a/drivers/net/tsec.c +++ b/drivers/net/tsec.c @@ -616,6 +616,7 @@ static uint mii_parse_BCM5482_sr(uint mii_reg, struct tsec_private *priv) { if (BCM8482_is_serdes(priv)) { mii_parse_BCM5482_serdes_sr(priv); + priv->flags |= TSEC_FIBER; } else { /* Wait for auto-negotiation to complete or fail */ mii_parse_sr(mii_reg, priv); @@ -939,8 +940,9 @@ static void adjust_link(struct eth_device *dev) break; }
- printf("Speed: %d, %s duplex\n", priv->speed, - (priv->duplexity) ? "full" : "half"); + printf("Speed: %d, %s duplex%s\n", priv->speed, + (priv->duplexity) ? "full" : "half", + (priv->flags & TSEC_FIBER) ? ", fiber mode" : "");
} else { printf("%s: No link.\n", dev->name); diff --git a/include/tsec.h b/include/tsec.h index b2e37d4..1e90365 100644 --- a/include/tsec.h +++ b/include/tsec.h @@ -584,9 +584,9 @@ typedef struct tsec
/* This flag currently only has * meaning if we're using the eTSEC */ -#define TSEC_REDUCED (1 << 1) - -#define TSEC_SGMII (1 << 2) +#define TSEC_REDUCED (1 << 1) /* MAC-PHY interface uses RGMII */ +#define TSEC_SGMII (1 << 2) /* MAC-PHY interface uses SGMII */ +#define TSEC_FIBER (1 << 3) /* PHY uses fiber, eg 1000 Base-X */
struct tsec_private { volatile tsec_t *regs;