This patch set speeds up graphics output on ARM by a factor of 60x.
On most ARM SBCs, we keep the frame buffer in DRAM and map it as cached, but need it accessible by the display controller which reads directly from a later point of consistency. Hence, we flush the frame buffer to DRAM on every change. The full frame buffer.
Unfortunately, with the advent of 4k displays, we are seeing frame buffers that can take a while to flush out. This was reported by Da Xue with grub, which happily print 1000s of spaces on the screen to draw a menu. Every printed space triggers a cache flush.
This patch set implements the easiest mitigation against this problem: Damage tracking. We remember the lowest common denominator region that was touched since the last video_sync() call and only flush that. The most typical writer to the frame buffer is the video console, which always writes rectangles of characters on the screen and syncs afterwards.
With this patch set applied, we reduce drawing a large grub menu (with serial console attached for size information) on an RK3399-ROC system at 1440p from 55 seconds to less than 1 second.
Version 2 also implements VIDEO_COPY using this mechanism, reducing its overhead compared to before as well. So even x86 systems should be faster with this now :).
Alternatives considered:
1) Lazy sync - Sandbox does this. It only calls video_sync(true) ever so often. We are missing timers to do this generically.
2) Double buffering - We could try to identify whether anything changed at all and only draw to the FB if it did. That would require maintaining a second buffer that we need to scan.
3) Text buffer - Maintain a buffer of all text printed on the screen with respective location. Don't write if the old and new character are identical. This would limit applicability to text only and is an optimization on top of this patch set.
4) Hash screen lines - Create a hash (sha256?) over every line when it changes. Only flush when it does. I'm not sure if this would waste more time, memory and cache than the current approach. It would make full screen updates much more expensive.
v1 -> v2:
- new patch: video: Use VIDEO_DAMAGE for VIDEO_COPY - Remove ifdefs - Fix dcache range; we were flushing too much before - Fix ranges in truetype target - Limit rotate to necessary damange
v2 -> v3:
- Rebase - Adapt to DM_VIDEO always - Make CONFIG_COPY always select VIDEO_DAMAGE
v3 -> v4:
- New patch: video: Always compile cache flushing code - New patch: video: Enable VIDEO_DAMAGE for drivers that need it - Simplify first damage logic - Skip damage on EfiBltVideoToBltBuffer - Move damage clear from patch 6 to patch 1 - Remove VIDEO_DAMAGE default for ARM
Alexander Graf (9): dm: video: Add damage tracking API dm: video: Add damage notification on display clear vidconsole: Add damage notifications to all vidconsole drivers video: Add damage notification on bmp display efi_loader: GOP: Add damage notification on BLT video: Only dcache flush damaged lines video: Use VIDEO_DAMAGE for VIDEO_COPY video: Always compile cache flushing code video: Enable VIDEO_DAMAGE for drivers that need it
arch/arm/mach-omap2/omap3/Kconfig | 1 + arch/arm/mach-sunxi/Kconfig | 1 + drivers/video/Kconfig | 27 +++++ drivers/video/console_normal.c | 22 ++-- drivers/video/console_rotate.c | 87 +++++++++----- drivers/video/console_truetype.c | 30 ++--- drivers/video/exynos/Kconfig | 1 + drivers/video/imx/Kconfig | 1 + drivers/video/meson/Kconfig | 1 + drivers/video/rockchip/Kconfig | 1 + drivers/video/stm32/Kconfig | 1 + drivers/video/vidconsole-uclass.c | 16 --- drivers/video/video-uclass.c | 187 +++++++++++++++++------------- drivers/video/video_bmp.c | 7 +- include/video.h | 54 ++++----- include/video_console.h | 49 -------- lib/efi_loader/efi_gop.c | 6 + 17 files changed, 251 insertions(+), 241 deletions(-)