Re: [U-Boot] [PATCH 9/9 V2] SMDK5250: Enable UART and MMC for Exynos5250 Rev 1.0

On 20 June 2012 20:11, Rajeshwari Shinde rajeshwari.s@samsung.com wrote:

This patch sets UART3 and MMC channle 0 for Exynos5250 Rev 1.0

Please fix typo channle -> channel.

Signed-off-by: Rajeshwari Shinde rajeshwari.s@samsung.com

Chnages in V2:        - None  board/samsung/smdk5250/smdk5250.c |    6 +++---  include/configs/smdk5250.h        |    2 +-  2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/board/samsung/smdk5250/smdk5250.c b/board/samsung/smdk5250/smdk5250.c index 3b078da..b593325 100644 --- a/board/samsung/smdk5250/smdk5250.c +++ b/board/samsung/smdk5250/smdk5250.c @@ -130,13 +130,13 @@ int board_mmc_init(bd_t *bis)  {        int err;

• err = exynos_pinmux_config(PERIPH_ID_SDMMC2, PINMUX_FLAG_NONE);

• err = exynos_pinmux_config(PERIPH_ID_SDMMC0, PINMUX_FLAG_8BIT_MODE);

if (err) {

• debug("SDMMC2 not configured\n");

• debug("SDMMC0 not configured\n");

return err;        }

• err = s5p_mmc_init(2, 4);

• err = s5p_mmc_init(0, 8);

return err;  }  #endif

Thanks. Minkyu Kang.