Hi Andre,
On Sun, 12 Dec 2021 at 18:03, Andre Przywara andre.przywara@arm.com wrote:
Add some long overdue instructions for building and installing U-Boot on Allwinner SoC based boards. This describes the building process, including TF-A and crust, plus installation to SD card, eMMC and SPI flash, both from Linux and U-Boot itself. Also describe FEL booting.
Signed-off-by: Andre Przywara andre.przywara@arm.com
Hi,
please have a look whether this makes sense. Feel free to just try something, and point out ambiguities or missing bits. For missing topics, please send a follow-up patch ;-)
Also this is quite long, shall this be split up in two (or more) files?
This is what rst.ninjs.org made of it, if you prefer to read it formatted: https://paste.c-net.org/PleasantNeedy
Cheers, Andre
doc/board/allwinner/index.rst | 9 + doc/board/allwinner/sunxi.rst | 304 ++++++++++++++++++++++++++++++++++ 2 files changed, 313 insertions(+) create mode 100644 doc/board/allwinner/index.rst create mode 100644 doc/board/allwinner/sunxi.rst
Reviewed-by: Simon Glass sjg@chromium.org
I agree that a follow-on patch to remove the duplicated files would be helpful, but this patch is a big step forward on its own.
It would be interesting to convert sunxi to use binman.
Regards, Simon