18 Nov
2003
18 Nov
'03
7:24 a.m.
On Mon, Nov 17, 2003 at 07:35:13PM -0800, Raghu wrote:
I am not particular in using them as K3s, how do I use them in J3 Mode??
You can use the innokom directory as an example, it works with K3 in compatiblity mode. Copy board/innokom/flash.c over to your board directory and change it and the config header file according to your needs. You also have to take care of the timing initialisation for the flash in your CPU specific init part.
Robert
--
Dipl.-Ing. Robert Schwebel | http://www.pengutronix.de
Pengutronix - Linux Solutions for Science and Industry
Handelsregister: Amtsgericht Hildesheim, HRA 2686
Hornemannstraße 12, 31137 Hildesheim, Germany
Phone: +49-5121-28619-0 | Fax: +49-5121-28619-4
Visit us at the SPS/IPC/Drives in Nuernberg, H10/340!