Enable related configs to support pcf2127 rtc DM feature for ls1028ardb board.
Signed-off-by: Chuanhua Han chuanhua.han@nxp.com --- depends on: - https://patchwork.ozlabs.org/project/uboot/list/?series=113364 - https://patchwork.ozlabs.org/project/uboot/list/?series=110856 - https://patchwork.ozlabs.org/project/uboot/list/?series=109677
Changes in v2: - Enable secure boot defconfig to support pcf2127 rtc DM feature for ls1028ardb board.
configs/ls1028ardb_tfa_SECURE_BOOT_defconfig | 9 ++++++++- configs/ls1028ardb_tfa_defconfig | 9 ++++++++- 2 files changed, 16 insertions(+), 2 deletions(-)
diff --git a/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig index 3432f90087..c101a33a4b 100644 --- a/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig +++ b/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig @@ -1,5 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_LS1028ARDB=y +CONFIG_SYS_MALLOC_F_LEN=0x6000 CONFIG_SECURE_BOOT=y CONFIG_SYS_FSL_SDHC_CLK_DIV=1 CONFIG_TFABOOT=y @@ -8,7 +9,6 @@ CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y -# CONFIG_SYS_MALLOC_F is not set CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y @@ -60,3 +60,10 @@ CONFIG_WDT=y CONFIG_WDT_SP805=y CONFIG_RSA=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_DM_I2C=y +CONFIG_DM_RTC=y +CONFIG_DM_GPIO=y +CONFIG_CMD_DATE=y +CONFIG_RTC_PCF2127=y +CONFIG_I2C_MUX=y +CONFIG_I2C_MUX_PCA954x=y diff --git a/configs/ls1028ardb_tfa_defconfig b/configs/ls1028ardb_tfa_defconfig index a8e4ddb7a8..440104cb18 100644 --- a/configs/ls1028ardb_tfa_defconfig +++ b/configs/ls1028ardb_tfa_defconfig @@ -1,5 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_LS1028ARDB=y +CONFIG_SYS_MALLOC_F_LEN=0x6000 CONFIG_SYS_FSL_SDHC_CLK_DIV=1 CONFIG_TFABOOT=y CONFIG_NR_DRAM_BANKS=2 @@ -7,7 +8,6 @@ CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y -# CONFIG_SYS_MALLOC_F is not set CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y @@ -62,3 +62,10 @@ CONFIG_USB_XHCI_DWC3=y CONFIG_WDT=y CONFIG_WDT_SP805=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_DM_I2C=y +CONFIG_DM_RTC=y +CONFIG_DM_GPIO=y +CONFIG_CMD_DATE=y +CONFIG_RTC_PCF2127=y +CONFIG_I2C_MUX=y +CONFIG_I2C_MUX_PCA954x=y