The FEC ref clock frequency on i.MX8M Mini/Nano/Plus was so far configured via ad-hoc board code. Replace that with DM clock clk_set_rate() instead. This way, the driver claims all its required clock and sets the ref clock rate, without any need of architecture specific register fiddling.
Signed-off-by: Marek Vasut marex@denx.de --- Cc: "Ariel D'Alessandro" ariel.dalessandro@collabora.com Cc: "NXP i.MX U-Boot Team" uboot-imx@nxp.com Cc: Andrey Zhizhikin andrey.zhizhikin@leica-geosystems.com Cc: Fabio Estevam festevam@gmail.com Cc: Joe Hershberger joe.hershberger@ni.com Cc: Lukasz Majewski lukma@denx.de Cc: Marcel Ziswiler marcel.ziswiler@toradex.com Cc: Marek Vasut marex@denx.de Cc: Michael Trimarchi michael@amarulasolutions.com Cc: Peng Fan peng.fan@nxp.com Cc: Ramon Fried rfried.dev@gmail.com Cc: Sean Anderson seanga2@gmail.com Cc: Stefano Babic sbabic@denx.de Cc: Tim Harvey tharvey@gateworks.com Cc: Tommaso Merciai tommaso.merciai@amarulasolutions.com Cc: u-boot@lists.denx.de --- V3: New patch --- drivers/net/fec_mxc.c | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+)
diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c index 1a6c18a441f..7a8577158ae 100644 --- a/drivers/net/fec_mxc.c +++ b/drivers/net/fec_mxc.c @@ -1196,6 +1196,33 @@ static void fec_gpio_reset(struct fec_priv *priv) } #endif
+static int fecmxc_set_ref_clk(struct clk *clk_ref, phy_interface_t interface) +{ + unsigned int freq; + int ret; + + if (!CONFIG_IS_ENABLED(CLK_CCF)) + return 0; + + if (interface == PHY_INTERFACE_MODE_MII) + freq = 25000000; + else if (interface == PHY_INTERFACE_MODE_RMII) + freq = 50000000; + else if (interface == PHY_INTERFACE_MODE_RGMII || + interface == PHY_INTERFACE_MODE_RGMII_ID || + interface == PHY_INTERFACE_MODE_RGMII_RXID || + interface == PHY_INTERFACE_MODE_RGMII_TXID) + freq = 125000000; + else + return -EINVAL; + + ret = clk_set_rate(clk_ref, freq); + if (ret < 0) + return ret; + + return 0; +} + static int fecmxc_probe(struct udevice *dev) { bool dm_mii_bus = true; @@ -1253,6 +1280,11 @@ static int fecmxc_probe(struct udevice *dev)
ret = clk_get_by_name(dev, "enet_clk_ref", &priv->clk_ref); if (!ret) { + ret = fecmxc_set_ref_clk(&priv->clk_ref, + pdata->phy_interface); + if (ret) + return ret; + ret = clk_enable(&priv->clk_ref); if (ret) return ret;