These options are taken from zcu102/104 platforms. Also use OF_SEPARATE instead of OF_BOARD. Maybe at some point this option will be taken back but as of now board detection is not ready.
export DEVICE_TREE="zynqmp-zcu102-revA" make xilinx_zynqmp_virt_defconfig make -j
Signed-off-by: Michal Simek michal.simek@xilinx.com ---
configs/xilinx_zynqmp_virt_defconfig | 27 +++++++++++++++++++++++++-- 1 file changed, 25 insertions(+), 2 deletions(-)
diff --git a/configs/xilinx_zynqmp_virt_defconfig b/configs/xilinx_zynqmp_virt_defconfig index c7e365d009ab..90e8c75d29c2 100644 --- a/configs/xilinx_zynqmp_virt_defconfig +++ b/configs/xilinx_zynqmp_virt_defconfig @@ -16,10 +16,13 @@ CONFIG_BOARD_EARLY_INIT_R=y CONFIG_SPL_OS_BOOT=y CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y +CONFIG_SPL_SPI_LOAD=y CONFIG_SPL_ATF=y +CONFIG_CMD_BOOTMENU=y CONFIG_CMD_THOR_DOWNLOAD=y CONFIG_CMD_MEMTEST=y CONFIG_SYS_ALT_MEMTEST=y +CONFIG_CMD_BIND=y CONFIG_CMD_CLK=y CONFIG_CMD_DFU=y CONFIG_CMD_FPGA_LOADBP=y @@ -29,14 +32,16 @@ CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_POWEROFF=y CONFIG_CMD_SDRAM=y +CONFIG_CMD_SPI=y CONFIG_CMD_USB=y +CONFIG_CMD_USB_MASS_STORAGE=y CONFIG_CMD_TFTPPUT=y CONFIG_CMD_TIME=y CONFIG_CMD_TIMER=y CONFIG_CMD_EXT4_WRITE=y CONFIG_SPL_OF_CONTROL=y -CONFIG_OF_BOARD=y CONFIG_ENV_IS_IN_FAT=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NET_RANDOM_ETHADDR=y @@ -53,7 +58,9 @@ CONFIG_FASTBOOT_CMD_OEM_FORMAT=y CONFIG_FPGA_XILINX=y CONFIG_FPGA_ZYNQMPPL=y CONFIG_DM_GPIO=y +CONFIG_GPIO_HOG=y CONFIG_XILINX_GPIO=y +CONFIG_DM_PCA953X=y CONFIG_DM_I2C=y CONFIG_SYS_I2C_CADENCE=y CONFIG_I2C_MUX=y @@ -65,29 +72,37 @@ CONFIG_I2C_EEPROM=y CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0x20 CONFIG_SYS_I2C_EEPROM_ADDR=0x0 CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0 +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_IO_VOLTAGE=y CONFIG_MMC_UHS_SUPPORT=y +CONFIG_MMC_HS200_SUPPORT=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y +CONFIG_SPI_FLASH_BAR=y +CONFIG_SF_DUAL_FLASH=y CONFIG_SPI_FLASH_ISSI=y CONFIG_SPI_FLASH_MACRONIX=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_SST=y CONFIG_SPI_FLASH_WINBOND=y # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set CONFIG_PHY_MARVELL=y +CONFIG_PHY_MICREL=y +CONFIG_PHY_MICREL_KSZ90X1=y CONFIG_PHY_NATSEMI=y CONFIG_PHY_REALTEK=y CONFIG_PHY_TI=y CONFIG_PHY_VITESSE=y +CONFIG_PHY_XILINX_GMII2RGMII=y CONFIG_PHY_FIXED=y -CONFIG_PHY_GIGE=y CONFIG_MII=y CONFIG_ZYNQ_GEM=y CONFIG_SCSI=y CONFIG_DM_SCSI=y CONFIG_ZYNQ_SERIAL=y CONFIG_SPI=y +CONFIG_ZYNQ_SPI=y CONFIG_ZYNQMP_GQSPI=y CONFIG_USB=y CONFIG_USB_XHCI_HCD=y @@ -101,4 +116,12 @@ CONFIG_USB_GADGET_MANUFACTURER="Xilinx" CONFIG_USB_GADGET_VENDOR_NUM=0x03FD CONFIG_USB_GADGET_PRODUCT_NUM=0x0300 CONFIG_USB_FUNCTION_THOR=y +CONFIG_USB_ETHER=y +CONFIG_USB_ETH_CDC=y +CONFIG_USB_HOST_ETHER=y +CONFIG_USB_ETHER_ASIX=y +CONFIG_WDT=y +CONFIG_WDT_CDNS=y +CONFIG_SPL_GZIP=y +CONFIG_OF_LIBFDT_OVERLAY=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y