Hello again, I have now received a BDI2000 from Abatron. There is a configuration file included with the package for my target board, which is - PQ2FADS.
U-boot is compiled with the CFG_PQ2FADS define in the MPC8260ADS.h file.
Can I use the configuration file as is and burn u-boot.bin to the flash, and after a restart of the board I get a working u-boot automagically?
Regards // Matias
------------------------------------------------------------------------- -----Original Message----- From: Chris Simmonds [mailto:chris@2net.co.uk] Sent: den 6 oktober 2003 10:45 To: Matias Sundman (TB/EAB) Cc: u-boot-users@lists.sourceforge.net Subject: Re: [U-Boot-Users] PQ2VADS (8270) & BDI2000
Hi,
I am using BDI2000 with an 8270 right now and it works fine. Its just the standard package for ppc 6xx/7xx/82xx/7400/7410. I used the configuration file for the vads8260 and fixed it up for my board (a custom unit). I don't have a config for the pq2vads board I'm afraid.
Chris.
Matias Sundman (TB/EAB) wrote:
Comrades, I have compiled uboot for the PQ2VADS Motorola evaluation board and tried to flash it with a JTAG probe from GreenHills. Unfortunately their probe does not support the 8270 architecture today.
Does BDI2000 support the ppc8270 JTAG chain architecture?
If so , does someone have a configuration file for the PQ2VADS Motorola evaluation board?
Best Regards // Matias
This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users