Add details about how to run a sandbox test directly, without using pytest. This is more convenient for rapid development, since it is faster and allows easier use of a debugger. Also mention sandbox_flattree as an example of the different sandbox builds available.
Signed-off-by: Simon Glass sjg@chromium.org ---
(no changes since v2)
Changes in v2: - Put the docs in tests_sandbox since it is more related to sandbox - Put in a mention of tests_sandbox in the main testing docs
doc/develop/index.rst | 1 + doc/develop/testing.rst | 9 ++++ doc/develop/tests_sandbox.rst | 79 +++++++++++++++++++++++++++++++++++ 3 files changed, 89 insertions(+) create mode 100644 doc/develop/tests_sandbox.rst
diff --git a/doc/develop/index.rst b/doc/develop/index.rst index ac57fdb8f30..50b1de3bdff 100644 --- a/doc/develop/index.rst +++ b/doc/develop/index.rst @@ -33,3 +33,4 @@ Testing coccinelle testing py_testing + tests_sandbox diff --git a/doc/develop/testing.rst b/doc/develop/testing.rst index f01ca4dc408..87c90eee271 100644 --- a/doc/develop/testing.rst +++ b/doc/develop/testing.rst @@ -36,6 +36,7 @@ U-Boot can be built as a user-space application (e.g. for Linux). This allows test to be executed without needing target hardware. The 'sandbox' target provides this feature and it is widely used in tests.
+See :doc:`tests_sandbox` for more information.
Pytest Suite ------------ @@ -51,8 +52,16 @@ You can run the tests on sandbox with::
This will produce HTML output in build-sandbox/test-log.html
+Some tests run with other versions of sandbox. For example sandbox_flattree +runs the tests with livetree (the hierachical devicetree) disabled. You can +also select particular tests with -k:: + + ./test/py/test.py --bd sandbox_flattree --build -k hello + See test/py/README.md for more information about the pytest suite.
+See :doc:`tests_sandbox` for how to run tests directly (not through pytest). +
tbot ---- diff --git a/doc/develop/tests_sandbox.rst b/doc/develop/tests_sandbox.rst new file mode 100644 index 00000000000..85bbd4f6734 --- /dev/null +++ b/doc/develop/tests_sandbox.rst @@ -0,0 +1,79 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +Tests Under the Hood +==================== + +Running sandbox tests directly +------------------------------ + +Typically tests are run using the pytest suite. This is easy and always gets +things right. + +But it is also possible to run some sandbox tests directly. For example, this +runs the dm_test_gpio() test which you can find in test/dm/gpio.c:: + + $ ./u-boot -T -c "ut dm gpio" + + + U-Boot 2021.01 + + Model: sandbox + DRAM: 128 MiB + WDT: Started with servicing (60s timeout) + MMC: mmc2: 2 (SD), mmc1: 1 (SD), mmc0: 0 (SD) + In: serial + Out: vidconsole + Err: vidconsole + Model: sandbox + SCSI: + Net: eth0: eth@10002000, eth5: eth@10003000, eth3: sbe5, eth6: eth@10004000 + Test: dm_test_gpio: gpio.c + Test: dm_test_gpio: gpio.c (flat tree) + Failures: 0 + +The -T option tells U-Boot to run with the 'test' devicetree (test.dts) instead +of -D which selects the normal sandbox.dts - this is necessary because many +tests rely on things in the test devicetree. If you try running tests without +-T then you may see failures, like:: + + $ ./u-boot -c "ut dm gpio" + + + U-Boot 2021.01 + + DRAM: 128 MiB + WDT: Not found! + MMC: + In: serial + Out: serial + Err: serial + SCSI: + Net: No ethernet found. + Please run with test device tree: + ./u-boot -d arch/sandbox/dts/test.dtb + Test: dm_test_gpio: gpio.c + test/dm/gpio.c:37, dm_test_gpio(): 0 == gpio_lookup_name("b4", &dev, &offset, &gpio): Expected 0x0 (0), got 0xffffffea (-22) + Test: dm_test_gpio: gpio.c (flat tree) + test/dm/gpio.c:37, dm_test_gpio(): 0 == gpio_lookup_name("b4", &dev, &offset, &gpio): Expected 0x0 (0), got 0xffffffea (-22) + Failures: 2 + +The message above should provide a hint if you forget. Even running with -D +will produce different results. + +You can easily use gdb on these tests, without needing --gdbserver:: + + $ gdb u-boot --args -T -c "ut dm gpio" + ... + (gdb) break dm_test_gpio + Breakpoint 1 at 0x1415bd: file test/dm/gpio.c, line 37. + (gdb) run -T -c "ut dm gpio" + Starting program: u-boot -T -c "ut dm gpio" + Test: dm_test_gpio: gpio.c + + Breakpoint 1, dm_test_gpio (uts=0x5555558029a0 <global_dm_test_state>) + at files/test/dm/gpio.c:37 + 37 ut_assertok(gpio_lookup_name("b4", &dev, &offset, &gpio)); + (gdb) + +You can then single-step and look at variables as needed. +