On Fri, Mar 25, 2022 at 08:36:38AM -0500, Han Xu wrote:
Previous u-boot code changed the default bch setting behavior and caused backward compatible issue. This fix choose the legacy bch geometry back again as the default option. If the minimum ecc strength that NAND chips required need to be chosen, it can be enabled by either adding DT flag "fsl,use-minimum-ecc" or CONFIG_NAND_MXS_USE_MINIMUM_ECC in configs. The unused flag "fsl,legacy-bch-geometry" get removed.
Fixes: 51cdf83eea (mtd: gpmi: provide the option to use legacy bch geometry) Fixes: 616f03daba (mtd: gpmi: change the BCH layout setting for large oob NAND) Tested-by: Tim Harvey tharvey@gateworks.com Tested-by: Sean Nyekjaer sean@geanix.com Signed-off-by: Han Xu han.xu@nxp.com Reviewed-by: Miquel Raynal miquel.raynal@bootlin.com
Applied to u-boot/master, thanks!