I can't rebase [PATCH 3/3] on u-boot-arm/master because it applies over Magnus Lilja's patch "i.MX31: Add basic support for Freescale's i.MX31 PDK board." (968614d8c3f17eb834838de9a390ef4879fb1e77)
Can you please pull this patch from u-boot-arm/testing to u-boot-arm/master ?
No the patch need to be rebased first.
Magnus could you rebase it? It will save me times
I've updated the patch and it now almost compiles. There's a problem at the last link stage where gnu-ld complains about multiple __udivsi3 definitions and incompatible EABI formats (see below, modulo gmail wrapping).
I can compile the imx31_litekit just fine and that board is very similar to the initial mx31pdk board.
Any ideas on what may be causing this?
/Magnus
UNDEF_SYM=`arm-none-linux-gnueabi-objdump -x board/freescale/mx31pdk/libmx31pdk.a lib_generic/libgeneric.a lib_generic/lzma/liblzma.a board/freescale/common/libfreescale.a cpu/arm1136/libarm1136.a cpu/arm1136/mx31/libmx31.a lib_arm/libarm.a fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a fs/yaffs2/libyaffs2.a net/libnet.a disk/libdisk.a drivers/bios_emulator/libatibiosemu.a drivers/block/libblock.a drivers/dma/libdma.a drivers/hwmon/libhwmon.a drivers/i2c/libi2c.a drivers/input/libinput.a drivers/misc/libmisc.a drivers/mmc/libmmc.a drivers/mtd/libmtd.a drivers/mtd/nand/libnand.a drivers/mtd/nand_legacy/libnand_legacy.a drivers/mtd/onenand/libonenand.a drivers/mtd/spi/libspi_flash.a drivers/net/libnet.a drivers/net/phy/libphy.a drivers/net/sk98lin/libsk98lin.a drivers/pci/libpci.a drivers/pcmcia/libpcmcia.a drivers/spi/libspi.a drivers/rtc/librtc.a drivers/serial/libserial.a drivers/usb/libusb.a drivers/video/libvideo.a common/libcommon.a libfdt/libfdt.a api/libapi.a post/libpost.a | \ sed -n -e 's/.*(__u_boot_cmd_.*)/-u\1/p'|sort|uniq`;\ cd /opt/git/u-boot && arm-none-linux-gnueabi-ld -Bstatic -T /opt/git/u-boot/board/freescale/mx31pdk/u-boot.lds -Ttext 0x87f00000 $UNDEF_SYM cpu/arm1136/start.o \ --start-group lib_generic/libgeneric.a lib_generic/lzma/liblzma.a board/freescale/common/libfreescale.a cpu/arm1136/libarm1136.a cpu/arm1136/mx31/libmx31.a lib_arm/libarm.a fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a fs/yaffs2/libyaffs2.a net/libnet.a disk/libdisk.a drivers/bios_emulator/libatibiosemu.a drivers/block/libblock.a drivers/dma/libdma.a drivers/hwmon/libhwmon.a drivers/i2c/libi2c.a drivers/input/libinput.a drivers/misc/libmisc.a drivers/mmc/libmmc.a drivers/mtd/libmtd.a drivers/mtd/nand/libnand.a drivers/mtd/nand_legacy/libnand_legacy.a drivers/mtd/onenand/libonenand.a drivers/mtd/spi/libspi_flash.a drivers/net/libnet.a drivers/net/phy/libphy.a drivers/net/sk98lin/libsk98lin.a drivers/pci/libpci.a drivers/pcmcia/libpcmcia.a drivers/spi/libspi.a drivers/rtc/librtc.a drivers/serial/libserial.a drivers/usb/libusb.a drivers/video/libvideo.a common/libcommon.a libfdt/libfdt.a api/libapi.a post/libpost.a board/freescale/mx31pdk/libmx31pdk.a --end-group -L /opt/freescale/usr/local/gcc-4.1.2-glibc-2.5-nptl-3/arm-none-linux-gnueabi/lib/gcc/arm-none-linux-gnueabi/4.1.2 -lgcc \ -Map u-boot.map -o u-boot /opt/freescale/usr/local/gcc-4.1.2-glibc-2.5-nptl-3/arm-none-linux-gnueabi/lib/gcc/arm-none-linux-gnueabi/4.1.2/libgcc.a(_udivsi3.o): In function `__aeabi_uidiv': /usr/src/redhat/BUILD/cross-mlib/source/gcc-4.1.2/gcc/config/arm/lib1funcs.asm:730: multiple definition of `__udivsi3' lib_arm/libarm.a(_udivsi3.o):/opt/git/u-boot/lib_arm/_udivsi3.S:17: first defined here arm-none-linux-gnueabi-ld: Warning: size of symbol `__udivsi3' changed from 152 in lib_arm/libarm.a(_udivsi3.o) to 496 in /opt/freescale/usr/local/gcc-4.1.2-glibc-2.5-nptl-3/arm-none-linux-gnueabi/lib/gcc/arm-none-linux-gnueabi/4.1.2/libgcc.a(_udivsi3.o) arm-none-linux-gnueabi-ld: ERROR: Source object /opt/freescale/usr/local/gcc-4.1.2-glibc-2.5-nptl-3/arm-none-linux-gnueabi/lib/gcc/arm-none-linux-gnueabi/4.1.2/libgcc.a(_udivdi3.o) has EABI version 4, but target u-boot has EABI version 0 arm-none-linux-gnueabi-ld: failed to merge target specific data of file /opt/freescale/usr/local/gcc-4.1.2-glibc-2.5-nptl-3/arm-none-linux-gnueabi/lib/gcc/arm-none-linux-gnueabi/4.1.2/libgcc.a(_udivdi3.o) arm-none-linux-gnueabi-ld: ERROR: Source object /opt/freescale/usr/local/gcc-4.1.2-glibc-2.5-nptl-3/arm-none-linux-gnueabi/lib/gcc/arm-none-linux-gnueabi/4.1.2/libgcc.a(_udivsi3.o) has EABI version 4, but target u-boot has EABI version 0 arm-none-linux-gnueabi-ld: failed to merge target specific data of file /opt/freescale/usr/local/gcc-4.1.2-glibc-2.5-nptl-3/arm-none-linux-gnueabi/lib/gcc/arm-none-linux-gnueabi/4.1.2/libgcc.a(_udivsi3.o) arm-none-linux-gnueabi-ld: ERROR: Source object /opt/freescale/usr/local/gcc-4.1.2-glibc-2.5-nptl-3/arm-none-linux-gnueabi/lib/gcc/arm-none-linux-gnueabi/4.1.2/libgcc.a(_clz.o) has EABI version 4, but target u-boot has EABI version 0 arm-none-linux-gnueabi-ld: failed to merge target specific data of file /opt/freescale/usr/local/gcc-4.1.2-glibc-2.5-nptl-3/arm-none-linux-gnueabi/lib/gcc/arm-none-linux-gnueabi/4.1.2/libgcc.a(_clz.o) /opt/freescale/usr/local/gcc-4.1.2-glibc-2.5-nptl-3/arm-none-linux-gnueabi/lib/gcc/arm-none-linux-gnueabi/4.1.2/libgcc.a(_udivdi3.o):(.ARM.exidx+0x0): undefined reference to `__aeabi_unwind_cpp_pr0' make: *** [u-boot] Error 1