On 20/08/2021 20.18, Simon Glass wrote:
Hi Harm,
On Wed, 18 Aug 2021 at 08:09, Harm Berntsen harm.berntsen@nedap.com wrote:
On Thu, 2021-05-13 at 19:39 -0600, Simon Glass wrote:
int clk_uclass_post_probe(struct udevice *dev) {
int ret;/* * when a clock provider is probed. Call clk_set_defaults() * also after the device is probed. This takes care of cases * where the DT is used to setup default parents and rates * using assigned-clocks */
clk_set_defaults(dev, 1);
ret = clk_set_defaults(dev, 1);if (ret)return log_ret(ret); return 0;}
Note that this patch broke booting my imx8mn based board on U-Boot v2021.10-rc2.
I just ran into the same issue with v2021.10 being broken for imx8mp_evk, and git bisect pointing at this commit, symptoms being
U-Boot 2021.10 (Oct 20 2021 - 08:45:51 +0200)
CPU: Freescale i.MX8MP[8] rev1.1 at 1200 MHz ... MMC: mmc@30b50000 - probe failed: -2 mmc@30b60000 - probe failed: -2
Reverting 92f1e9a4b on top of v2021.10 yields
U-Boot 2021.10-00001-gac2520a138 (Oct 20 2021 - 09:05:48 +0200)
CPU: Freescale i.MX8MP[8] rev1.1 at 1200 MHz ... MMC: FSL_SDHC: 1, FSL_SDHC: 2
cc += imx maintainers, this should not still be broken 2 months (and a release) after it was reported.
Rasmus