The PHYCORE_IMX8MP is used by the phyBOARD-Pollux. Migrate board to OF_UPSTREAM. Linux kernel device tree for the board can be used as is, corresponding U-Boot device tree files are removed. U-Boot tweaks are kept unchanged.
Signed-off-by: Yannic Moog y.moog@phytec.de --- arch/arm/dts/Makefile | 1 - arch/arm/dts/imx8mp-phyboard-pollux-rdk.dts | 361 ---------------------------- arch/arm/dts/imx8mp-phycore-som.dtsi | 323 ------------------------- arch/arm/mach-imx/imx8m/Kconfig | 1 + board/phytec/phycore_imx8mp/MAINTAINERS | 1 - configs/phycore-imx8mp_defconfig | 2 +- 6 files changed, 2 insertions(+), 687 deletions(-)
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 480f8ff569d..d09d0d84bec 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -1033,7 +1033,6 @@ dtb-$(CONFIG_ARCH_IMX8M) += \ imx8mp-dhcom-pdk3-overlay-rev100.dtbo \ imx8mp-icore-mx8mp-edimm2.2.dtb \ imx8mp-msc-sm2s.dtb \ - imx8mp-phyboard-pollux-rdk.dtb \ imx8mq-pico-pi.dtb \ imx8mq-kontron-pitx-imx8m.dtb \ imx8mq-librem5-r4.dtb diff --git a/arch/arm/dts/imx8mp-phyboard-pollux-rdk.dts b/arch/arm/dts/imx8mp-phyboard-pollux-rdk.dts deleted file mode 100644 index c8640cac3ed..00000000000 --- a/arch/arm/dts/imx8mp-phyboard-pollux-rdk.dts +++ /dev/null @@ -1,361 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright (C) 2020 PHYTEC Messtechnik GmbH - * Author: Teresa Remmet t.remmet@phytec.de - */ - -/dts-v1/; - -#include <dt-bindings/leds/leds-pca9532.h> -#include <dt-bindings/pwm/pwm.h> -#include "imx8mp-phycore-som.dtsi" - -/ { - model = "PHYTEC phyBOARD-Pollux i.MX8MP"; - compatible = "phytec,imx8mp-phyboard-pollux-rdk", - "phytec,imx8mp-phycore-som", "fsl,imx8mp"; - - chosen { - stdout-path = &uart1; - }; - - reg_can1_stby: regulator-can1-stby { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_flexcan1_reg>; - gpio = <&gpio3 20 GPIO_ACTIVE_LOW>; - regulator-max-microvolt = <3300000>; - regulator-min-microvolt = <3300000>; - regulator-name = "can1-stby"; - }; - - reg_can2_stby: regulator-can2-stby { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_flexcan2_reg>; - gpio = <&gpio3 21 GPIO_ACTIVE_LOW>; - regulator-max-microvolt = <3300000>; - regulator-min-microvolt = <3300000>; - regulator-name = "can2-stby"; - }; - - reg_usb1_vbus: regulator-usb1-vbus { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb1_vbus>; - gpio = <&gpio1 12 GPIO_ACTIVE_LOW>; - regulator-max-microvolt = <5000000>; - regulator-min-microvolt = <5000000>; - regulator-name = "usb1_host_vbus"; - }; - - reg_usdhc2_vmmc: regulator-usdhc2 { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; - regulator-name = "VSD_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; - enable-active-high; - startup-delay-us = <100>; - off-on-delay-us = <12000>; - }; -}; - -&eqos { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_eqos>; - phy-mode = "rgmii-id"; - phy-handle = <ðphy0>; - status = "okay"; - - mdio { - compatible = "snps,dwmac-mdio"; - #address-cells = <1>; - #size-cells = <0>; - - ethphy0: ethernet-phy@1 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <0x1>; - ti,rx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>; - ti,tx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>; - ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; - ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; - enet-phy-lane-no-swap; - }; - }; -}; - -/* CAN FD */ -&flexcan1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_flexcan1>; - xceiver-supply = <®_can1_stby>; - status = "okay"; -}; - -&flexcan2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_flexcan2>; - xceiver-supply = <®_can2_stby>; - status = "okay"; -}; - -&i2c2 { - clock-frequency = <400000>; - pinctrl-names = "default", "gpio"; - pinctrl-0 = <&pinctrl_i2c2>; - pinctrl-1 = <&pinctrl_i2c2_gpio>; - sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - status = "okay"; - - eeprom@51 { - compatible = "atmel,24c02"; - reg = <0x51>; - pagesize = <16>; - }; - - leds@62 { - compatible = "nxp,pca9533"; - reg = <0x62>; - - led-1 { - type = <PCA9532_TYPE_LED>; - }; - - led-2 { - type = <PCA9532_TYPE_LED>; - }; - - led-3 { - type = <PCA9532_TYPE_LED>; - }; - }; -}; - -&snvs_pwrkey { - status = "okay"; -}; - -/* debug console */ -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; - status = "okay"; -}; - -/* USB1 Host mode Type-A */ -&usb3_phy0 { - vbus-supply = <®_usb1_vbus>; - status = "okay"; -}; - -&usb3_0 { - status = "okay"; -}; - -&usb_dwc3_0 { - dr_mode = "host"; - status = "okay"; -}; - -/* USB2 4-port USB3.0 HUB */ -&usb3_phy1 { - status = "okay"; -}; - -&usb3_1 { - fsl,permanently-attached; - fsl,disable-port-power-control; - status = "okay"; -}; - -&usb_dwc3_1 { - dr_mode = "host"; - status = "okay"; -}; - -/* RS232/RS485 */ -&uart2 { - assigned-clocks = <&clk IMX8MP_CLK_UART2>; - assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - uart-has-rtscts; - status = "okay"; -}; - -/* SD-Card */ -&usdhc2 { - assigned-clocks = <&clk IMX8MP_CLK_USDHC2>; - assigned-clock-rates = <200000000>; - pinctrl-names = "default", "state_100mhz", "state_200mhz"; - pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_pins>; - pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_pins>; - pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_pins>; - cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; - vmmc-supply = <®_usdhc2_vmmc>; - bus-width = <4>; - status = "okay"; -}; - -&gpio1 { - gpio-line-names = "", "", "X_PMIC_WDOG_B", "", - "PMIC_SD_VSEL", "", "", "", "", "", - "", "", "USB1_OTG_PWR", "", "", "X_nETHPHY_INT"; -}; - -&gpio2 { - gpio-line-names = "", "", "", "", - "", "", "", "", "", "", - "", "", "X_SD2_CD_B", "", "", "", - "", "", "", "SD2_RESET_B"; -}; - -&gpio3 { - gpio-line-names = "", "", "", "", - "", "", "", "", "", "", - "", "", "", "", "", "", - "", "", "", "", "nCAN1_EN", "nCAN2_EN"; -}; - -&gpio4 { - gpio-line-names = "", "", "", "", - "", "", "", "", "", "", - "", "", "", "", "", "", - "", "", "X_PMIC_IRQ_B", "", "nENET0_INT_PWDN"; -}; - -&iomuxc { - pinctrl_eqos: eqosgrp { - fsl,pins = < - MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x2 - MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x2 - MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x90 - MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x90 - MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x90 - MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x90 - MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x90 - MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x90 - MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x16 - MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x16 - MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x16 - MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x16 - MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x16 - MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x16 - MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20 0x10 - >; - }; - - pinctrl_flexcan1: flexcan1grp { - fsl,pins = < - MX8MP_IOMUXC_SAI5_RXD2__CAN1_RX 0x154 - MX8MP_IOMUXC_SAI5_RXD1__CAN1_TX 0x154 - >; - }; - - pinctrl_flexcan2: flexcan2grp { - fsl,pins = < - MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX 0x154 - MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX 0x154 - >; - }; - - pinctrl_flexcan1_reg: flexcan1reggrp { - fsl,pins = < - MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20 0x154 - >; - }; - - pinctrl_flexcan2_reg: flexcan2reggrp { - fsl,pins = < - MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21 0x154 - >; - }; - - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c2 - MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400001c2 - >; - }; - - pinctrl_i2c2_gpio: i2c2gpiogrp { - fsl,pins = < - MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16 0x1e2 - MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17 0x1e2 - >; - }; - - pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { - fsl,pins = < - MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x40 - >; - }; - - pinctrl_uart1: uart1grp { - fsl,pins = < - MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX 0x40 - MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX 0x40 - >; - }; - - pinctrl_usb1_vbus: usb1vbusgrp { - fsl,pins = < - MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x10 - >; - }; - - pinctrl_uart2: uart2grp { - fsl,pins = < - MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x140 - MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x140 - MX8MP_IOMUXC_SAI3_RXC__UART2_DCE_CTS 0x140 - MX8MP_IOMUXC_SAI3_RXD__UART2_DCE_RTS 0x140 - >; - }; - - pinctrl_usdhc2_pins: usdhc2-gpiogrp { - fsl,pins = < - MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x1c4 - >; - }; - - pinctrl_usdhc2: usdhc2grp { - fsl,pins = < - MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190 - MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0 - MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0 - MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0 - MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0 - MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0 - MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0 - >; - }; - - pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { - fsl,pins = < - MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194 - MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4 - MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4 - MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4 - MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4 - MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4 - MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0 - >; - }; - - pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { - fsl,pins = < - MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x196 - MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d6 - MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d6 - MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6 - MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6 - MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6 - MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0 - >; - }; -}; diff --git a/arch/arm/dts/imx8mp-phycore-som.dtsi b/arch/arm/dts/imx8mp-phycore-som.dtsi deleted file mode 100644 index 79b290a002c..00000000000 --- a/arch/arm/dts/imx8mp-phycore-som.dtsi +++ /dev/null @@ -1,323 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright (C) 2020 PHYTEC Messtechnik GmbH - * Author: Teresa Remmet t.remmet@phytec.de - */ - -#include <dt-bindings/net/ti-dp83867.h> -#include "imx8mp.dtsi" - -/ { - model = "PHYTEC phyCORE-i.MX8MP"; - compatible = "phytec,imx8mp-phycore-som", "fsl,imx8mp"; - - aliases { - rtc0 = &rv3028; - rtc1 = &snvs_rtc; - }; - - memory@40000000 { - device_type = "memory"; - reg = <0x0 0x40000000 0 0x80000000>; - }; -}; - -&A53_0 { - cpu-supply = <&buck2>; -}; - -&A53_1 { - cpu-supply = <&buck2>; -}; - -&A53_2 { - cpu-supply = <&buck2>; -}; - -&A53_3 { - cpu-supply = <&buck2>; -}; - -/* ethernet 1 */ -&fec { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_fec>; - phy-mode = "rgmii-id"; - phy-handle = <ðphy1>; - fsl,magic-packet; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - ethphy1: ethernet-phy@0 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <0>; - interrupt-parent = <&gpio1>; - interrupts = <15 IRQ_TYPE_EDGE_FALLING>; - ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; - ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; - ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; - ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; - ti,min-output-impedance; - enet-phy-lane-no-swap; - }; - }; -}; - -&flexspi { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_flexspi0>; - status = "okay"; - - som_flash: flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <80000000>; - spi-tx-bus-width = <1>; - spi-rx-bus-width = <4>; - }; -}; - -&i2c1 { - clock-frequency = <400000>; - pinctrl-names = "default", "gpio"; - pinctrl-0 = <&pinctrl_i2c1>; - pinctrl-1 = <&pinctrl_i2c1_gpio>; - sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - status = "okay"; - - pmic: pmic@25 { - reg = <0x25>; - compatible = "nxp,pca9450c"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pmic>; - interrupt-parent = <&gpio4>; - interrupts = <18 IRQ_TYPE_LEVEL_LOW>; - - regulators { - buck1: BUCK1 { - regulator-compatible = "BUCK1"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <2187500>; - regulator-boot-on; - regulator-always-on; - regulator-ramp-delay = <3125>; - }; - - buck2: BUCK2 { - regulator-compatible = "BUCK2"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <2187500>; - regulator-boot-on; - regulator-always-on; - regulator-ramp-delay = <3125>; - nxp,dvs-run-voltage = <950000>; - nxp,dvs-standby-voltage = <850000>; - }; - - buck4: BUCK4 { - regulator-compatible = "BUCK4"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <3400000>; - regulator-boot-on; - regulator-always-on; - }; - - buck5: BUCK5 { - regulator-compatible = "BUCK5"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <3400000>; - regulator-boot-on; - regulator-always-on; - }; - - buck6: BUCK6 { - regulator-compatible = "BUCK6"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <3400000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo1: LDO1 { - regulator-compatible = "LDO1"; - regulator-min-microvolt = <1600000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo2: LDO2 { - regulator-compatible = "LDO2"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1150000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo3: LDO3 { - regulator-compatible = "LDO3"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo4: LDO4 { - regulator-compatible = "LDO4"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <3300000>; - }; - - ldo5: LDO5 { - regulator-compatible = "LDO5"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - }; - }; - - eeprom@51 { - compatible = "atmel,24c32"; - reg = <0x51>; - pagesize = <32>; - }; - - rv3028: rtc@52 { - compatible = "microcrystal,rv3028"; - reg = <0x52>; - trickle-resistor-ohms = <3000>; - }; -}; - -/* eMMC */ -&usdhc3 { - assigned-clocks = <&clk IMX8MP_CLK_USDHC3_ROOT>; - assigned-clock-rates = <400000000>; - pinctrl-names = "default", "state_100mhz", "state_200mhz"; - pinctrl-0 = <&pinctrl_usdhc3>; - pinctrl-1 = <&pinctrl_usdhc3_100mhz>; - pinctrl-2 = <&pinctrl_usdhc3_200mhz>; - bus-width = <8>; - non-removable; - status = "okay"; -}; - -&wdog1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_wdog>; - fsl,ext-reset-output; - status = "okay"; -}; - -&iomuxc { - pinctrl_fec: fecgrp { - fsl,pins = < - MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x3 - MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO 0x3 - MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x91 - MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x91 - MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x91 - MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x91 - MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x91 - MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x91 - MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x12 - MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x12 - MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x14 - MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x14 - MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x14 - MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x14 - MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15 0x11 - >; - }; - - pinctrl_flexspi0: flexspi0grp { - fsl,pins = < - MX8MP_IOMUXC_NAND_ALE__FLEXSPI_A_SCLK 0x1c2 - MX8MP_IOMUXC_NAND_CE0_B__FLEXSPI_A_SS0_B 0x82 - MX8MP_IOMUXC_NAND_DATA00__FLEXSPI_A_DATA00 0x82 - MX8MP_IOMUXC_NAND_DATA01__FLEXSPI_A_DATA01 0x82 - MX8MP_IOMUXC_NAND_DATA02__FLEXSPI_A_DATA02 0x82 - MX8MP_IOMUXC_NAND_DATA03__FLEXSPI_A_DATA03 0x82 - >; - }; - - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c3 - MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001c3 - >; - }; - - pinctrl_i2c1_gpio: i2c1gpiogrp { - fsl,pins = < - MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14 0x1e3 - MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15 0x1e3 - >; - }; - - pinctrl_pmic: pmicirqgrp { - fsl,pins = < - MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18 0x141 - >; - }; - - pinctrl_usdhc3: usdhc3grp { - fsl,pins = < - MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x190 - MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d0 - MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d0 - MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d0 - MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d0 - MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d0 - MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d0 - MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d0 - MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d0 - MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d0 - MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x190 - >; - }; - - pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { - fsl,pins = < - MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194 - MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4 - MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4 - MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4 - MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4 - MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4 - MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4 - MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4 - MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4 - MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4 - MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x194 - >; - }; - - pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { - fsl,pins = < - MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x196 - MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d6 - MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d2 - MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d2 - MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d2 - MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d2 - MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d2 - MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d2 - MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d2 - MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d2 - MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x196 - >; - }; - - pinctrl_wdog: wdoggrp { - fsl,pins = < - MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0xe6 - >; - }; -}; diff --git a/arch/arm/mach-imx/imx8m/Kconfig b/arch/arm/mach-imx/imx8m/Kconfig index f81be42d5b0..046c78547b2 100644 --- a/arch/arm/mach-imx/imx8m/Kconfig +++ b/arch/arm/mach-imx/imx8m/Kconfig @@ -303,6 +303,7 @@ config TARGET_PHYCORE_IMX8MP select IMX8MP select SUPPORT_SPL select IMX8M_LPDDR4 + imply OF_UPSTREAM
config TARGET_IMX8MM_CL_IOT_GATE bool "CompuLab iot-gate-imx8" diff --git a/board/phytec/phycore_imx8mp/MAINTAINERS b/board/phytec/phycore_imx8mp/MAINTAINERS index d3beb978d3a..645476ae30a 100644 --- a/board/phytec/phycore_imx8mp/MAINTAINERS +++ b/board/phytec/phycore_imx8mp/MAINTAINERS @@ -2,7 +2,6 @@ phyCORE-i.MX8M Plus M: Teresa Remmet t.remmet@phytec.de W: https://www.phytec.eu/product-eu/system-on-modules/phycore-imx-8m-plus/ S: Maintained -F: arch/arm/dts/imx8mp-phyboard-pollux-rdk.dts F: arch/arm/dts/imx8mp-phyboard-pollux-rdk-u-boot.dtsi F: board/phytec/phycore_imx8mp/ F: configs/phycore-imx8mp_defconfig diff --git a/configs/phycore-imx8mp_defconfig b/configs/phycore-imx8mp_defconfig index e9a287cb441..6a59a27e3d4 100644 --- a/configs/phycore-imx8mp_defconfig +++ b/configs/phycore-imx8mp_defconfig @@ -9,7 +9,7 @@ CONFIG_ENV_SIZE=0x10000 CONFIG_ENV_OFFSET=0x3C0000 CONFIG_SYS_I2C_MXC_I2C1=y CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="imx8mp-phyboard-pollux-rdk" +CONFIG_DEFAULT_DEVICE_TREE="freescale/imx8mp-phyboard-pollux-rdk" CONFIG_SPL_TEXT_BASE=0x920000 CONFIG_TARGET_PHYCORE_IMX8MP=y CONFIG_PHYTEC_SOM_DETECTION=y