Re: [U-Boot] Relocation issue on armv7 targets

On Tue, Jun 19, 2012 at 09:06:48PM +0530, jagan wrote:

Hi Albert,

I have observed an issue regarding u-boot relocation, it's working with _TEXT_BASE address but for other address in DDR it's not working. Stops at relocation offset.

I was trying this on both QEMU as well as real target.

Here are my findings:

VExpress# tftp 0x8000 u-boot.bin smc911x: detected LAN9118 controller smc911x: phy initialized smc911x: MAC 52:54:00:12:34:56 Using smc911x-0 device TFTP from server 192.168.0.3; our IP address is 192.168.0.4 Filename 'u-boot.bin'. Load address: 0x8000 Loading: ########################## done Bytes transferred = 128736 (1f6e0 hex) VExpress# go 0x8000 ## Starting application at 0x00008000 ...

Running U-Boot from within U-Boot isn't allowed / supported.