On 8/7/21 10:24 PM, Simon Glass wrote:
Use the livetree API for this driver.
Signed-off-by: Simon Glass sjg@chromium.org
Reviewed-by: Jaehoon Chung jh80.chung@samsung.com
Best Regars, Jaehoon Chung
drivers/mmc/ftsdc010_mci.c | 22 +++++++--------------- 1 file changed, 7 insertions(+), 15 deletions(-)
diff --git a/drivers/mmc/ftsdc010_mci.c b/drivers/mmc/ftsdc010_mci.c index 221fba313d3..b30da5b72a4 100644 --- a/drivers/mmc/ftsdc010_mci.c +++ b/drivers/mmc/ftsdc010_mci.c @@ -30,8 +30,6 @@ #include <syscon.h> #include <linux/err.h>
-DECLARE_GLOBAL_DATA_PTR;
#define CFG_CMD_TIMEOUT (CONFIG_SYS_HZ >> 4) /* 250 ms */ #define CFG_RST_TIMEOUT CONFIG_SYS_HZ /* 1 sec reset timeout */
@@ -395,24 +393,18 @@ static int ftsdc010_mmc_of_to_plat(struct udevice *dev) #if CONFIG_IS_ENABLED(OF_REAL) struct ftsdc_priv *priv = dev_get_priv(dev); struct ftsdc010_chip *chip = &priv->chip;
- chip->name = dev->name; chip->ioaddr = dev_read_addr_ptr(dev);
- chip->buswidth = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev),
"bus-width", 4);
- chip->buswidth = dev_read_u32_default(dev, "bus-width", 4); chip->priv = dev;
- priv->fifo_depth = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev),
"fifo-depth", 0);- priv->fifo_mode = fdtdec_get_bool(gd->fdt_blob, dev_of_offset(dev),
"fifo-mode");- if (fdtdec_get_int_array(gd->fdt_blob, dev_of_offset(dev),
"clock-freq-min-max", priv->minmax, 2)) {int val = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev),"max-frequency", -EINVAL);if (val < 0)return val;
priv->fifo_depth = dev_read_u32_default(dev, "fifo-depth", 0);
priv->fifo_mode = dev_read_bool(dev, "fifo-mode");
if (dev_read_u32_array(dev, "clock-freq-min-max", priv->minmax, 2)) {
if (dev_read_u32(dev, "max-frequency", &priv->minmax[1]))return -EINVAL;priv->minmax[0] = 400000; /* 400 kHz */
priv->minmax[1] = val;