Re: [U-Boot] [PATCH v3 1/6] spl: Convert CONFIG_SPL_ABORT_ON_RAW_IMAGE into a positive option

Hi Andrew,

On 8 February 2017 at 10:21, Andrew F. Davis afd@ti.com wrote:

CONFIG_SPL_ABORT_ON_RAW_IMAGE causes SPL to abort and move on when it encounters RAW images, express this same functionality as a positive option enabling support for RAW images: CONFIG_SPL_RAW_IMAGE_SUPPORT

Signed-off-by: Andrew F. Davis afd@ti.com

Kconfig | 7 +++++++ README | 4 ---- common/spl/spl.c | 9 +++++---- include/configs/imx6_spl.h | 4 ++-- include/configs/socfpga_de1_soc.h | 2 +- include/spl.h | 2 +- 6 files changed, 16 insertions(+), 12 deletions(-)

diff --git a/Kconfig b/Kconfig index 8f9ea97f3d..8ce2d8c3bb 100644 --- a/Kconfig +++ b/Kconfig @@ -291,6 +291,13 @@ config SYS_TEXT_BASE help TODO: Move CONFIG_SYS_TEXT_BASE for all the architecture

+config SPL_RAW_IMAGE_SUPPORT

•   bool "Support SPL loading and booting of RAW images"
  

•   default y
  

•   help
  

•     SPL will support loading and booting a RAW image when this option
  

•     is y. If this is not set, SPL will move on to other available
  

•     boot media to find a suitable image.
  
  

config SYS_CLK_FREQ depends on ARC || ARCH_SUNXI diff --git a/README b/README index ecb1710d01..127c77c4e2 100644 --- a/README +++ b/README @@ -3298,10 +3298,6 @@ FIT uImage format: consider that a completely unreadable NAND block is bad, and thus should be skipped silently.

•           CONFIG_SPL_ABORT_ON_RAW_IMAGE
  

•           When defined, SPL will proceed to another boot method
  

•           if the image it has loaded does not have a signature.
  

•           CONFIG_SPL_RELOC_STACK
            Adress of the start of the stack SPL will use after
            relocation.  If unspecified, this is equal to
  

diff --git a/common/spl/spl.c b/common/spl/spl.c index 766fb3d6f4..d564d4d2a2 100644 --- a/common/spl/spl.c +++ b/common/spl/spl.c @@ -146,16 +146,17 @@ int spl_parse_image_header(struct spl_image_info *spl_image, } #endif

-#ifdef CONFIG_SPL_ABORT_ON_RAW_IMAGE

•           /* Signature not found, proceed to other boot methods. */
  

•           return -EINVAL;
  

-#else +#ifdef CONFIG_SPL_RAW_IMAGE_SUPPORT /* Signature not found - assume u-boot.bin */ debug("mkimage signature not found - ih_magic = %x\n", header->ih_magic); spl_set_header_raw_uboot(spl_image); +#else

•           /* RAW image not supported, proceed to other boot methods. */
  

How about a debug() here?

•           return -EINVAL;
  

#endif }

•   return 0;
  

}

diff --git a/include/configs/imx6_spl.h b/include/configs/imx6_spl.h index c5a035fccf..acaf81b6b9 100644 --- a/include/configs/imx6_spl.h +++ b/include/configs/imx6_spl.h @@ -45,14 +45,14 @@ #if defined(CONFIG_SPL_MMC_SUPPORT) #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SYS_MONITOR_LEN 409600 /* 400 KB */ -#define CONFIG_SPL_ABORT_ON_RAW_IMAGE +#undef CONFIG_SPL_RAW_IMAGE_SUPPORT

I think this needs to be done in the defconfigs, or a a default in imx6 Kconfig. You might be able to change your 'default y' above to 'default y if !xxx' where xxx is the secure boot option.

#endif

/* SATA support */ #if defined(CONFIG_SPL_SATA_SUPPORT) #define CONFIG_SPL_SATA_BOOT_DEVICE 0 #define CONFIG_SYS_SATA_FAT_BOOT_PARTITION 1 -#define CONFIG_SPL_ABORT_ON_RAW_IMAGE +#undef CONFIG_SPL_RAW_IMAGE_SUPPORT #endif

/* Define the payload for FAT/EXT support */ diff --git a/include/configs/socfpga_de1_soc.h b/include/configs/socfpga_de1_soc.h index 5e7a712cf5..52d292b752 100644 --- a/include/configs/socfpga_de1_soc.h +++ b/include/configs/socfpga_de1_soc.h @@ -51,6 +51,6 @@ /* The rest of the configuration is shared */ #include <configs/socfpga_common.h>

-#define CONFIG_SPL_ABORT_ON_RAW_IMAGE +#undef CONFIG_SPL_RAW_IMAGE_SUPPORT

#endif /* __CONFIG_TERASIC_DE1_SOC_H__ */ diff --git a/include/spl.h b/include/spl.h index bde44374ea..270798c988 100644 --- a/include/spl.h +++ b/include/spl.h @@ -85,7 +85,7 @@ void spl_set_header_raw_uboot(struct spl_image_info *spl_image);

• This parses the legacy image header information at @header and sets up
• @spl_image according to what is found. If no image header is found, then
• a raw image or bootz is assumed. If CONFIG_SPL_PANIC_ON_RAW_IMAGE is

• • enabled, then this causes a panic. If CONFIG_SPL_ABORT_ON_RAW_IMAGE is

• • enabled, then this causes a panic. If CONFIG_SPL_RAW_IMAGE_SUPPORT is not
  • enabled then U-Boot gives up. Otherwise U-Boot sets up the image using
  • spl_set_header_raw_uboot(), or possibly the bootz header.

-- 2.11.0

Regards, Simon