On 10/19/21 11:49 PM, Usama Arif wrote:
There are 4 registers (PERIPHID{0-3}) that contain the ID of MCI. For MMCs' with peripheral id 0x02041180 and 0x03041180, H/W flow control needs to be enabled for multi block writes (MMC CMD 18).
Signed-off-by: Usama Arif usama.arif@arm.com
Reviewed-by: Jaehoon Chung jh80.chung@samsung.com
Best Regards, Jaehoon Chung
drivers/mmc/arm_pl180_mmci.c | 14 ++++++++++++++ drivers/mmc/arm_pl180_mmci.h | 1 + 2 files changed, 15 insertions(+)
diff --git a/drivers/mmc/arm_pl180_mmci.c b/drivers/mmc/arm_pl180_mmci.c index f99b5f997e..9c5d48e90c 100644 --- a/drivers/mmc/arm_pl180_mmci.c +++ b/drivers/mmc/arm_pl180_mmci.c @@ -282,6 +282,14 @@ static int host_request(struct mmc *dev, return result; }
+static int check_peripheral_id(struct pl180_mmc_host *host, u32 periph_id) +{
- return readl(&host->base->periph_id0) == (periph_id & 0xFF) &&
readl(&host->base->periph_id1) == ((periph_id >> 8) & 0xFF) &&readl(&host->base->periph_id2) == ((periph_id >> 16) & 0xFF) &&readl(&host->base->periph_id3) == ((periph_id >> 24) & 0xFF);+}
static int host_set_ios(struct mmc *dev) { struct pl180_mmc_host *host = dev->priv; @@ -337,6 +345,12 @@ static int host_set_ios(struct mmc *dev) sdi_clkcr &= ~(SDI_CLKCR_WIDBUS_MASK); sdi_clkcr |= buswidth; }
/* For MMCs' with peripheral id 0x02041180 and 0x03041180, H/W flow control
* needs to be enabled for multi block writes (MMC CMD 18).*/if (check_peripheral_id(host, 0x02041180) ||
check_peripheral_id(host, 0x03041180))sdi_clkcr |= SDI_CLKCR_HWFCEN;writel(sdi_clkcr, &host->base->clock); udelay(CLK_CHANGE_DELAY);
diff --git a/drivers/mmc/arm_pl180_mmci.h b/drivers/mmc/arm_pl180_mmci.h index 15c29beadb..fca15910a8 100644 --- a/drivers/mmc/arm_pl180_mmci.h +++ b/drivers/mmc/arm_pl180_mmci.h @@ -43,6 +43,7 @@ #define SDI_CLKCR_CLKEN 0x00000100 #define SDI_CLKCR_PWRSAV 0x00000200 #define SDI_CLKCR_BYPASS 0x00000400 +#define SDI_CLKCR_HWFCEN 0x00001000 #define SDI_CLKCR_WIDBUS_MASK 0x00001800 #define SDI_CLKCR_WIDBUS_1 0x00000000 #define SDI_CLKCR_WIDBUS_4 0x00000800