The eMMC partition write reliability settings are to be set while partitioning a device, as per the eMMC spec, so changes to these attributes needs to be done in the hardware partitioning API. This commit adds such support.
Signed-off-by: Diego Santa Cruz Diego.SantaCruz@spinetix.com --- drivers/mmc/mmc.c | 39 +++++++++++++++++++++++++++++++++++++++ include/mmc.h | 13 ++++++++++++- 2 files changed, 51 insertions(+), 1 deletions(-)
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index 058f347..643a622 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -615,6 +615,7 @@ int mmc_hwpart_config(struct mmc *mmc, u32 gp_size_mult[4]; u32 max_enh_size_mult; u32 tot_enh_size_mult = 0; + u8 wr_rel_set; int i, pidx, err; ALLOC_CACHE_ALIGN_BUFFER(u8, ext_csd, MMC_MAX_BLOCK_LEN);
@@ -689,6 +690,33 @@ int mmc_hwpart_config(struct mmc *mmc, return -EMEDIUMTYPE; }
+ /* The default value of EXT_CSD_WR_REL_SET is device + * dependent, the values can only be changed if the + * EXT_CSD_HS_CTRL_REL bit is set. The values can be + * changed only once and before partitioning is completed. */ + wr_rel_set = ext_csd[EXT_CSD_WR_REL_SET]; + if (conf->user.wr_rel_change) { + if (conf->user.wr_rel_set) + wr_rel_set |= EXT_CSD_WR_DATA_REL_USR; + else + wr_rel_set &= ~EXT_CSD_WR_DATA_REL_USR; + } + for (pidx = 0; pidx < 4; pidx++) { + if (conf->gp_part[pidx].wr_rel_change) { + if (conf->gp_part[pidx].wr_rel_set) + wr_rel_set |= EXT_CSD_WR_DATA_REL_GP(pidx); + else + wr_rel_set &= ~EXT_CSD_WR_DATA_REL_GP(pidx); + } + } + + if (wr_rel_set != ext_csd[EXT_CSD_WR_REL_SET] && + !(ext_csd[EXT_CSD_WR_REL_PARAM] & EXT_CSD_HS_CTRL_REL)) { + puts("Card does not support host controlled partition write " + "reliability settings\n"); + return -EMEDIUMTYPE; + } + if (ext_csd[EXT_CSD_PART_SETTING_COMPLETED] & PART_SETTING_COMPLETED) { printf("Card already partitioned\n"); return -EPERM; @@ -745,6 +773,17 @@ int mmc_hwpart_config(struct mmc *mmc, if (mode == MMC_HWPART_CONF_SET) return 0;
+ /* The WR_REL_SET is a write-once register but shall be + * written before setting PART_SETTING_COMPLETED. As it is + * write-once we can only write it when completing the + * partitioning. */ + if (wr_rel_set != ext_csd[EXT_CSD_WR_REL_SET]) { + err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_WR_REL_SET, wr_rel_set); + if (err) + return err; + } + /* Setting PART_SETTING_COMPLETED confirms the partition * configuration but it only becomes effective after power * cycle, so we do not adjust the partition related settings diff --git a/include/mmc.h b/include/mmc.h index 9f9e6f7..b024f1c 100644 --- a/include/mmc.h +++ b/include/mmc.h @@ -154,6 +154,8 @@ #define EXT_CSD_MAX_ENH_SIZE_MULT 157 /* R */ #define EXT_CSD_PARTITIONING_SUPPORT 160 /* RO */ #define EXT_CSD_RST_N_FUNCTION 162 /* R/W */ +#define EXT_CSD_WR_REL_PARAM 166 /* R */ +#define EXT_CSD_WR_REL_SET 167 /* R/W */ #define EXT_CSD_RPMB_MULT 168 /* RO */ #define EXT_CSD_ERASE_GROUP_DEF 175 /* R/W */ #define EXT_CSD_BOOT_BUS_WIDTH 177 @@ -204,6 +206,11 @@ #define EXT_CSD_ENH_USR (1 << 0) /* user data area is enhanced */ #define EXT_CSD_ENH_GP(x) (1 << ((x)+1)) /* GP part (x+1) is enhanced */
+#define EXT_CSD_HS_CTRL_REL (1 << 0) /* host controlled WR_REL_SET */ + +#define EXT_CSD_WR_DATA_REL_USR (1 << 0) /* user data area WR_REL */ +#define EXT_CSD_WR_DATA_REL_GP(x) (1 << ((x)+1)) /* GP part (x+1) WR_REL */ + #define R1_ILLEGAL_COMMAND (1 << 22) #define R1_APP_CMD (1 << 5)
@@ -334,10 +341,14 @@ struct mmc_hwpart_conf { struct { uint enh_start; /* in 512-byte sectors */ uint enh_size; /* in 512-byte sectors, if 0 no enh area */ + unsigned wr_rel_change : 1; + unsigned wr_rel_set : 1; } user; struct { uint size; /* in 512-byte sectors */ - int enhanced; + unsigned enhanced : 1; + unsigned wr_rel_change : 1; + unsigned wr_rel_set : 1; } gp_part[4]; };