Add spl support for rk3399.
Signed-off-by: Kever Yang kever.yang@rock-chips.com ---
arch/arm/Kconfig | 1 + arch/arm/dts/rk3399.dtsi | 24 ++++ arch/arm/include/asm/arch-rockchip/grf_rk3399.h | 118 ++++++++++++++++++ arch/arm/mach-rockchip/Kconfig | 2 + arch/arm/mach-rockchip/Makefile | 1 + arch/arm/mach-rockchip/rk3399-board-spl.c | 157 ++++++++++++++++++++++++ configs/evb-rk3399_defconfig | 17 +++ drivers/clk/rockchip/clk_rk3399.c | 42 ++++++- drivers/pinctrl/rockchip/pinctrl_rk3399.c | 106 ---------------- include/configs/rk3399_common.h | 11 ++ include/dt-bindings/clock/rk3399-cru.h | 16 ++- 11 files changed, 382 insertions(+), 113 deletions(-) create mode 100644 arch/arm/mach-rockchip/rk3399-board-spl.c
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index d871a45..9a0efe4 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -882,6 +882,7 @@ config ARCH_ROCKCHIP select DM select SPL_DM if SPL select SYS_MALLOC_F + select SPL_SEPARATE_BSS if SPL select SPL_SYS_MALLOC_SIMPLE if SPL select DM_GPIO select DM_I2C diff --git a/arch/arm/dts/rk3399.dtsi b/arch/arm/dts/rk3399.dtsi index 22277ff..c57fa5bc 100644 --- a/arch/arm/dts/rk3399.dtsi +++ b/arch/arm/dts/rk3399.dtsi @@ -183,6 +183,7 @@ };
sdhci: sdhci@fe330000 { + u-boot,dm-pre-reloc; compatible = "rockchip,rk3399-sdhci-5.1", "arasan,sdhci-5.1"; reg = <0x0 0xfe330000 0x0 0x10000>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; @@ -416,6 +417,7 @@ };
pmugrf: syscon@ff320000 { + u-boot,dm-pre-reloc; compatible = "rockchip,rk3399-pmugrf", "syscon", "simple-mfd"; reg = <0x0 0xff320000 0x0 0x1000>; #address-cells = <1>; @@ -497,7 +499,26 @@ status = "disabled"; };
+ dfi: dfi@ff630000 { + reg = <0x00 0xff630000 0x00 0x4000>; + compatible = "rockchip,rk3399-dfi"; + rockchip,pmu = <&pmugrf>; + clocks = <&cru PCLK_DDR_MON>; + clock-names = "pclk_ddr_mon"; + status = "disabled"; + }; + + dmc: dmc { + u-boot,dm-pre-reloc; + compatible = "rockchip,rk3399-dmc"; + devfreq-events = <&dfi>; + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru SCLK_DDRCLK>; + clock-names = "dmc_clk"; + }; + pmucru: pmu-clock-controller@ff750000 { + u-boot,dm-pre-reloc; compatible = "rockchip,rk3399-pmucru"; reg = <0x0 0xff750000 0x0 0x1000>; #clock-cells = <1>; @@ -507,6 +528,7 @@ };
cru: clock-controller@ff760000 { + u-boot,dm-pre-reloc; compatible = "rockchip,rk3399-cru"; reg = <0x0 0xff760000 0x0 0x1000>; #clock-cells = <1>; @@ -530,6 +552,7 @@ };
grf: syscon@ff770000 { + u-boot,dm-pre-reloc; compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd"; reg = <0x0 0xff770000 0x0 0x10000>; #address-cells = <1>; @@ -607,6 +630,7 @@ };
pinctrl: pinctrl { + u-boot,dm-pre-reloc; compatible = "rockchip,rk3399-pinctrl"; rockchip,grf = <&grf>; rockchip,pmu = <&pmugrf>; diff --git a/arch/arm/include/asm/arch-rockchip/grf_rk3399.h b/arch/arm/include/asm/arch-rockchip/grf_rk3399.h index d3d1467..62d8496 100644 --- a/arch/arm/include/asm/arch-rockchip/grf_rk3399.h +++ b/arch/arm/include/asm/arch-rockchip/grf_rk3399.h @@ -318,4 +318,122 @@ struct rk3399_pmusgrf_regs { }; check_member(rk3399_pmusgrf_regs, slv_secure_con4, 0xe3d4);
+enum { + /* GRF_GPIO2B_IOMUX */ + GRF_GPIO2B1_SEL_SHIFT = 0, + GRF_GPIO2B1_SEL_MASK = 3 << GRF_GPIO2B1_SEL_SHIFT, + GRF_SPI2TPM_RXD = 1, + GRF_GPIO2B2_SEL_SHIFT = 2, + GRF_GPIO2B2_SEL_MASK = 3 << GRF_GPIO2B2_SEL_SHIFT, + GRF_SPI2TPM_TXD = 1, + GRF_GPIO2B3_SEL_SHIFT = 6, + GRF_GPIO2B3_SEL_MASK = 3 << GRF_GPIO2B3_SEL_SHIFT, + GRF_SPI2TPM_CLK = 1, + GRF_GPIO2B4_SEL_SHIFT = 8, + GRF_GPIO2B4_SEL_MASK = 3 << GRF_GPIO2B4_SEL_SHIFT, + GRF_SPI2TPM_CSN0 = 1, + + /* GRF_GPIO3A_IOMUX */ + GRF_GPIO3A4_SEL_SHIFT = 8, + GRF_GPIO3A4_SEL_MASK = 3 << GRF_GPIO3A4_SEL_SHIFT, + GRF_SPI0NORCODEC_RXD = 2, + GRF_GPIO3A5_SEL_SHIFT = 10, + GRF_GPIO3A5_SEL_MASK = 3 << GRF_GPIO3A5_SEL_SHIFT, + GRF_SPI0NORCODEC_TXD = 2, + GRF_GPIO3A6_SEL_SHIFT = 12, + GRF_GPIO3A6_SEL_MASK = 3 << GRF_GPIO3A6_SEL_SHIFT, + GRF_SPI0NORCODEC_CLK = 2, + GRF_GPIO3A7_SEL_SHIFT = 14, + GRF_GPIO3A7_SEL_MASK = 3 << GRF_GPIO3A7_SEL_SHIFT, + GRF_SPI0NORCODEC_CSN0 = 2, + + /* GRF_GPIO3B_IOMUX */ + GRF_GPIO3B0_SEL_SHIFT = 0, + GRF_GPIO3B0_SEL_MASK = 3 << GRF_GPIO3B0_SEL_SHIFT, + GRF_SPI0NORCODEC_CSN1 = 2, + + /* GRF_GPIO4B_IOMUX */ + GRF_GPIO4B0_SEL_SHIFT = 0, + GRF_GPIO4B0_SEL_MASK = 3 << GRF_GPIO4B0_SEL_SHIFT, + GRF_SDMMC_DATA0 = 1, + GRF_UART2DBGA_SIN = 2, + GRF_GPIO4B1_SEL_SHIFT = 2, + GRF_GPIO4B1_SEL_MASK = 3 << GRF_GPIO4B1_SEL_SHIFT, + GRF_SDMMC_DATA1 = 1, + GRF_UART2DBGA_SOUT = 2, + GRF_GPIO4B2_SEL_SHIFT = 4, + GRF_GPIO4B2_SEL_MASK = 3 << GRF_GPIO4B2_SEL_SHIFT, + GRF_SDMMC_DATA2 = 1, + GRF_GPIO4B3_SEL_SHIFT = 6, + GRF_GPIO4B3_SEL_MASK = 3 << GRF_GPIO4B3_SEL_SHIFT, + GRF_SDMMC_DATA3 = 1, + GRF_GPIO4B4_SEL_SHIFT = 8, + GRF_GPIO4B4_SEL_MASK = 3 << GRF_GPIO4B4_SEL_SHIFT, + GRF_SDMMC_CLKOUT = 1, + GRF_GPIO4B5_SEL_SHIFT = 10, + GRF_GPIO4B5_SEL_MASK = 3 << GRF_GPIO4B5_SEL_SHIFT, + GRF_SDMMC_CMD = 1, + + /* GRF_GPIO4C_IOMUX */ + GRF_GPIO4C0_SEL_SHIFT = 0, + GRF_GPIO4C0_SEL_MASK = 3 << GRF_GPIO4C0_SEL_SHIFT, + GRF_UART2DGBB_SIN = 2, + GRF_GPIO4C1_SEL_SHIFT = 2, + GRF_GPIO4C1_SEL_MASK = 3 << GRF_GPIO4C1_SEL_SHIFT, + GRF_UART2DGBB_SOUT = 2, + GRF_GPIO4C2_SEL_SHIFT = 4, + GRF_GPIO4C2_SEL_MASK = 3 << GRF_GPIO4C2_SEL_SHIFT, + GRF_PWM_0 = 1, + GRF_GPIO4C3_SEL_SHIFT = 6, + GRF_GPIO4C3_SEL_MASK = 3 << GRF_GPIO4C3_SEL_SHIFT, + GRF_UART2DGBC_SIN = 1, + GRF_GPIO4C4_SEL_SHIFT = 8, + GRF_GPIO4C4_SEL_MASK = 3 << GRF_GPIO4C4_SEL_SHIFT, + GRF_UART2DBGC_SOUT = 1, + GRF_GPIO4C6_SEL_SHIFT = 12, + GRF_GPIO4C6_SEL_MASK = 3 << GRF_GPIO4C6_SEL_SHIFT, + GRF_PWM_1 = 1, + + /* GRF_SOC_CON7 */ + GRF_UART_DBG_SEL_SHIFT = 10, + GRF_UART_DBG_SEL_MASK = 3 << GRF_UART_DBG_SEL_SHIFT, + GRF_UART_DBG_SEL_C = 2, + + /* PMUGRF_GPIO0A_IOMUX */ + PMUGRF_GPIO0A6_SEL_SHIFT = 12, + PMUGRF_GPIO0A6_SEL_MASK = 3 << PMUGRF_GPIO0A6_SEL_SHIFT, + PMUGRF_PWM_3A = 1, + + /* PMUGRF_GPIO1A_IOMUX */ + PMUGRF_GPIO1A7_SEL_SHIFT = 14, + PMUGRF_GPIO1A7_SEL_MASK = 3 << PMUGRF_GPIO1A7_SEL_SHIFT, + PMUGRF_SPI1EC_RXD = 2, + + /* PMUGRF_GPIO1B_IOMUX */ + PMUGRF_GPIO1B0_SEL_SHIFT = 0, + PMUGRF_GPIO1B0_SEL_MASK = 3 << PMUGRF_GPIO1B0_SEL_SHIFT, + PMUGRF_SPI1EC_TXD = 2, + PMUGRF_GPIO1B1_SEL_SHIFT = 2, + PMUGRF_GPIO1B1_SEL_MASK = 3 << PMUGRF_GPIO1B1_SEL_SHIFT, + PMUGRF_SPI1EC_CLK = 2, + PMUGRF_GPIO1B2_SEL_SHIFT = 4, + PMUGRF_GPIO1B2_SEL_MASK = 3 << PMUGRF_GPIO1B2_SEL_SHIFT, + PMUGRF_SPI1EC_CSN0 = 2, + PMUGRF_GPIO1B6_SEL_SHIFT = 12, + PMUGRF_GPIO1B6_SEL_MASK = 3 << PMUGRF_GPIO1B6_SEL_SHIFT, + PMUGRF_PWM_3B = 1, + PMUGRF_GPIO1B7_SEL_SHIFT = 14, + PMUGRF_GPIO1B7_SEL_MASK = 3 << PMUGRF_GPIO1B7_SEL_SHIFT, + PMUGRF_I2C0PMU_SDA = 2, + + /* PMUGRF_GPIO1C_IOMUX */ + PMUGRF_GPIO1C0_SEL_SHIFT = 0, + PMUGRF_GPIO1C0_SEL_MASK = 3 << PMUGRF_GPIO1C0_SEL_SHIFT, + PMUGRF_I2C0PMU_SCL = 2, + PMUGRF_GPIO1C3_SEL_SHIFT = 6, + PMUGRF_GPIO1C3_SEL_MASK = 3 << PMUGRF_GPIO1C3_SEL_SHIFT, + PMUGRF_PWM_2 = 1, + +}; + #endif /* __SOC_ROCKCHIP_RK3399_GRF_H__ */ diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig index 5c4a4c2..cd8fef8 100644 --- a/arch/arm/mach-rockchip/Kconfig +++ b/arch/arm/mach-rockchip/Kconfig @@ -26,6 +26,8 @@ config ROCKCHIP_RK3288 config ROCKCHIP_RK3399 bool "Support Rockchip RK3399" select ARM64 + select SUPPORT_SPL + select SPL help The Rockchip RK3399 is a ARM-based SoC with a dual-core Cortex-A72 and quad-core Cortex-A53. diff --git a/arch/arm/mach-rockchip/Makefile b/arch/arm/mach-rockchip/Makefile index 6e79fed..b58c02d 100644 --- a/arch/arm/mach-rockchip/Makefile +++ b/arch/arm/mach-rockchip/Makefile @@ -7,6 +7,7 @@ ifdef CONFIG_SPL_BUILD obj-$(CONFIG_ROCKCHIP_RK3036) += rk3036-board-spl.o obj-$(CONFIG_ROCKCHIP_RK3288) += rk3288-board-spl.o +obj-$(CONFIG_ROCKCHIP_RK3399) += rk3399-board-spl.o obj-$(CONFIG_ROCKCHIP_SPL_BACK_TO_BROM) += save_boot_param.o else obj-$(CONFIG_ROCKCHIP_RK3288) += rk3288-board.o diff --git a/arch/arm/mach-rockchip/rk3399-board-spl.c b/arch/arm/mach-rockchip/rk3399-board-spl.c new file mode 100644 index 0000000..504c8f9 --- /dev/null +++ b/arch/arm/mach-rockchip/rk3399-board-spl.c @@ -0,0 +1,157 @@ +/* + * (C) Copyright 2015 Google, Inc + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <debug_uart.h> +#include <dm.h> +#include <fdtdec.h> +#include <led.h> +#include <malloc.h> +#include <ram.h> +#include <spl.h> +#include <asm/gpio.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/hardware.h> +#include <asm/arch/periph.h> +#include <asm/arch/sdram.h> +#include <asm/arch/timer.h> +#include <dm/pinctrl.h> +#include <dm/root.h> +#include <dm/test.h> +#include <dm/util.h> +#include <power/regulator.h> + +DECLARE_GLOBAL_DATA_PTR; + +u32 spl_boot_device(void) +{ + return BOOT_DEVICE_MMC1; +} + +u32 spl_boot_mode(const u32 boot_device) +{ + return MMCSD_MODE_RAW; +} + +#define TIMER_CHN10_BASE 0xff8680a0 +#define TIMER_END_COUNT_L 0x00 +#define TIMER_END_COUNT_H 0x04 +#define TIMER_INIT_COUNT_L 0x10 +#define TIMER_INIT_COUNT_H 0x14 +#define TIMER_CONTROL_REG 0x1c + +#define TIMER_EN 0x1 +#define TIMER_FMODE (0 << 1) +#define TIMER_RMODE (1 << 1) + +void secure_timer_init(void) +{ + writel(0xffffffff, TIMER_CHN10_BASE + TIMER_END_COUNT_L); + writel(0xffffffff, TIMER_CHN10_BASE + TIMER_END_COUNT_H); + writel(0, TIMER_CHN10_BASE + TIMER_INIT_COUNT_L); + writel(0, TIMER_CHN10_BASE + TIMER_INIT_COUNT_H); + writel(TIMER_EN | TIMER_FMODE, TIMER_CHN10_BASE + TIMER_CONTROL_REG); +} + +#define GRF_EMMCCORE_CON11 0xff77f02c +void board_init_f(ulong dummy) +{ + struct udevice *pinctrl; + struct udevice *dev; + int ret; + + /* Example code showing how to enable the debug UART on RK3288 */ +#include <asm/arch/grf_rk3399.h> + /* Enable early UART2 channel C on the RK3399 */ +#define GRF_BASE 0xff770000 + struct rk3399_grf_regs * const grf = (void *)GRF_BASE; + + rk_clrsetreg(&grf->gpio4c_iomux, + GRF_GPIO4C3_SEL_MASK, + GRF_UART2DGBC_SIN << GRF_GPIO4C3_SEL_SHIFT); + rk_clrsetreg(&grf->gpio4c_iomux, + GRF_GPIO4C4_SEL_MASK, + GRF_UART2DBGC_SOUT << GRF_GPIO4C4_SEL_SHIFT); + /* Set channel C as UART2 input */ + rk_clrsetreg(&grf->soc_con7, + GRF_UART_DBG_SEL_MASK, + GRF_UART_DBG_SEL_C << GRF_UART_DBG_SEL_SHIFT); +#ifdef EARLY_UART + /* + * Debug UART can be used from here if required: + * + * debug_uart_init(); + * printch('a'); + * printhex8(0x1234); + * printascii("string"); + */ + debug_uart_init(); + printascii("U-Boot SPL board init"); +#endif + /* Emmc clock generator: disable the clock multipilier */ + rk_clrreg(GRF_EMMCCORE_CON11, 0x0ff); + + ret = spl_init(); + if (ret) { + debug("spl_init() failed: %d\n", ret); + hang(); + } + + secure_timer_init(); + + ret = uclass_get_device(UCLASS_PINCTRL, 0, &pinctrl); + if (ret) { + debug("Pinctrl init failed: %d\n", ret); + return; + } + + ret = uclass_get_device(UCLASS_RAM, 0, &dev); + if (ret) { + debug("DRAM init failed: %d\n", ret); + return; + } +} + +void spl_board_init(void) +{ + struct udevice *pinctrl; + int ret; + + ret = uclass_get_device(UCLASS_PINCTRL, 0, &pinctrl); + if (ret) { + debug("%s: Cannot find pinctrl device\n", __func__); + goto err; + } + + /* Enable debug UART */ + ret = pinctrl_request_noflags(pinctrl, PERIPH_ID_UART_DBG); + if (ret) { + debug("%s: Failed to set up console UART\n", __func__); + goto err; + } + + preloader_console_init(); +#ifdef CONFIG_ROCKCHIP_SPL_BACK_TO_BROM + back_to_bootrom(); +#endif + return; +err: + printf("spl_board_init: Error %d\n", ret); + + /* No way to report error here */ + hang(); +} + +#ifdef CONFIG_SPL_LOAD_FIT +int board_fit_config_name_match(const char *name) +{ + /* Just empty function now - can't decide what to choose */ + debug("%s: %s\n", __func__, name); + + return 0; +} +#endif diff --git a/configs/evb-rk3399_defconfig b/configs/evb-rk3399_defconfig index 40a8295..78c2846 100644 --- a/configs/evb-rk3399_defconfig +++ b/configs/evb-rk3399_defconfig @@ -3,7 +3,16 @@ CONFIG_ARCH_ROCKCHIP=y CONFIG_ROCKCHIP_RK3399=y CONFIG_DEFAULT_DEVICE_TREE="rk3399-evb" CONFIG_FIT=y +CONFIG_SPL_LOAD_FIT=y +CONFIG_SPL_OF_LIBFDT=y +CONFIG_SPL_ATF_SUPPORT=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x200 +CONFIG_SPL_ATF_TEXT_BASE=0x00010000 # CONFIG_DISPLAY_CPUINFO is not set +CONFIG_SPL_STACK_R=y +CONFIG_SPL_STACK_R_ADDR=0x80000 +CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000 +CONFIG_SYS_MALLOC_F_LEN=0x4000 CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set @@ -16,18 +25,26 @@ CONFIG_CMD_EXT2=y CONFIG_CMD_EXT4=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y +CONFIG_CMD_PXE=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" CONFIG_REGMAP=y +CONFIG_SPL_REGMAP=y CONFIG_SYSCON=y +CONFIG_SPL_SYSCON=y CONFIG_CLK=y +CONFIG_SPL_CLK=y CONFIG_ROCKCHIP_GPIO=y CONFIG_ROCKCHIP_DWMMC=y CONFIG_ROCKCHIP_SDHCI=y CONFIG_PINCTRL=y +CONFIG_SPL_PINCTRL=y CONFIG_ROCKCHIP_RK3399_PINCTRL=y CONFIG_PWM_ROCKCHIP=y CONFIG_REGULATOR_PWM=y CONFIG_DM_REGULATOR_FIXED=y CONFIG_RAM=y +CONFIG_SPL_RAM=y CONFIG_DEBUG_UART=y CONFIG_DEBUG_UART_BASE=0xFF1A0000 CONFIG_DEBUG_UART_CLOCK=24000000 diff --git a/drivers/clk/rockchip/clk_rk3399.c b/drivers/clk/rockchip/clk_rk3399.c index 2e87e4b..d259a1c 100644 --- a/drivers/clk/rockchip/clk_rk3399.c +++ b/drivers/clk/rockchip/clk_rk3399.c @@ -709,6 +709,44 @@ static ulong rk3399_mmc_set_clk(struct rk3399_cru *cru, return rk3399_mmc_get_clk(cru, clk_id); }
+#define PMUSGRF_DDR_RGN_CON16 0xff330040 +static ulong rk3399_ddr_set_clk(struct rk3399_cru *cru, + ulong set_rate) +{ + struct pll_div dpll_cfg; + + /* IC ECO bug, need to set this register */ + writel(0xc000c000, PMUSGRF_DDR_RGN_CON16); + + /* clk_ddrc == DPLL = 24MHz / refdiv * fbdiv / postdiv1 / postdiv2 */ + switch (set_rate) { + case 200*MHz: + dpll_cfg = (struct pll_div) + {.refdiv = 1, .fbdiv = 50, .postdiv1 = 6, .postdiv2 = 1}; + break; + case 300*MHz: + dpll_cfg = (struct pll_div) + {.refdiv = 2, .fbdiv = 100, .postdiv1 = 4, .postdiv2 = 1}; + break; + case 666*MHz: + dpll_cfg = (struct pll_div) + {.refdiv = 2, .fbdiv = 111, .postdiv1 = 2, .postdiv2 = 1}; + break; + case 800*MHz: + dpll_cfg = (struct pll_div) + {.refdiv = 1, .fbdiv = 100, .postdiv1 = 3, .postdiv2 = 1}; + break; + case 933*MHz: + dpll_cfg = (struct pll_div) + {.refdiv = 1, .fbdiv = 116, .postdiv1 = 3, .postdiv2 = 1}; + break; + default: + error("Unsupported SDRAM frequency!,%ld\n", set_rate); + } + rkclk_set_pll(&cru->dpll_con[0], &dpll_cfg); + + return set_rate; +} static ulong rk3399_clk_get_rate(struct clk *clk) { struct rk3399_clk_priv *priv = dev_get_priv(clk->dev); @@ -763,6 +801,9 @@ static ulong rk3399_clk_set_rate(struct clk *clk, ulong rate) case DCLK_VOP1: ret = rk3399_vop_set_clk(priv->cru, clk->id, rate); break; + case SCLK_DDRCLK: + ret = rk3399_ddr_set_clk(priv->cru, rate); + break; default: return -ENOENT; } @@ -939,7 +980,6 @@ static void pmuclk_init(struct rk3399_pmucru *pmucru)
/* configure pmu pclk */ pclk_div = PPLL_HZ / PMU_PCLK_HZ - 1; - assert((pclk_div + 1) * PMU_PCLK_HZ == PPLL_HZ && pclk_div < 0x1f); rk_clrsetreg(&pmucru->pmucru_clksel[0], PMU_PCLK_DIV_CON_MASK, pclk_div << PMU_PCLK_DIV_CON_SHIFT); diff --git a/drivers/pinctrl/rockchip/pinctrl_rk3399.c b/drivers/pinctrl/rockchip/pinctrl_rk3399.c index 17ea165..2f8aa64 100644 --- a/drivers/pinctrl/rockchip/pinctrl_rk3399.c +++ b/drivers/pinctrl/rockchip/pinctrl_rk3399.c @@ -22,112 +22,6 @@ struct rk3399_pinctrl_priv { struct rk3399_pmugrf_regs *pmugrf; };
-enum { - /* GRF_GPIO2B_IOMUX */ - GRF_GPIO2B1_SEL_SHIFT = 0, - GRF_GPIO2B1_SEL_MASK = 3 << GRF_GPIO2B1_SEL_SHIFT, - GRF_SPI2TPM_RXD = 1, - GRF_GPIO2B2_SEL_SHIFT = 2, - GRF_GPIO2B2_SEL_MASK = 3 << GRF_GPIO2B2_SEL_SHIFT, - GRF_SPI2TPM_TXD = 1, - GRF_GPIO2B3_SEL_SHIFT = 6, - GRF_GPIO2B3_SEL_MASK = 3 << GRF_GPIO2B3_SEL_SHIFT, - GRF_SPI2TPM_CLK = 1, - GRF_GPIO2B4_SEL_SHIFT = 8, - GRF_GPIO2B4_SEL_MASK = 3 << GRF_GPIO2B4_SEL_SHIFT, - GRF_SPI2TPM_CSN0 = 1, - - /* GRF_GPIO3A_IOMUX */ - GRF_GPIO3A4_SEL_SHIFT = 8, - GRF_GPIO3A4_SEL_MASK = 3 << GRF_GPIO3A4_SEL_SHIFT, - GRF_SPI0NORCODEC_RXD = 2, - GRF_GPIO3A5_SEL_SHIFT = 10, - GRF_GPIO3A5_SEL_MASK = 3 << GRF_GPIO3A5_SEL_SHIFT, - GRF_SPI0NORCODEC_TXD = 2, - GRF_GPIO3A6_SEL_SHIFT = 12, - GRF_GPIO3A6_SEL_MASK = 3 << GRF_GPIO3A6_SEL_SHIFT, - GRF_SPI0NORCODEC_CLK = 2, - GRF_GPIO3A7_SEL_SHIFT = 14, - GRF_GPIO3A7_SEL_MASK = 3 << GRF_GPIO3A7_SEL_SHIFT, - GRF_SPI0NORCODEC_CSN0 = 2, - - /* GRF_GPIO3B_IOMUX */ - GRF_GPIO3B0_SEL_SHIFT = 0, - GRF_GPIO3B0_SEL_MASK = 3 << GRF_GPIO3B0_SEL_SHIFT, - GRF_SPI0NORCODEC_CSN1 = 2, - - /* GRF_GPIO4B_IOMUX */ - GRF_GPIO4B0_SEL_SHIFT = 0, - GRF_GPIO4B0_SEL_MASK = 3 << GRF_GPIO4B0_SEL_SHIFT, - GRF_SDMMC_DATA0 = 1, - GRF_UART2DBGA_SIN = 2, - GRF_GPIO4B1_SEL_SHIFT = 2, - GRF_GPIO4B1_SEL_MASK = 3 << GRF_GPIO4B1_SEL_SHIFT, - GRF_SDMMC_DATA1 = 1, - GRF_UART2DBGA_SOUT = 2, - GRF_GPIO4B2_SEL_SHIFT = 4, - GRF_GPIO4B2_SEL_MASK = 3 << GRF_GPIO4B2_SEL_SHIFT, - GRF_SDMMC_DATA2 = 1, - GRF_GPIO4B3_SEL_SHIFT = 6, - GRF_GPIO4B3_SEL_MASK = 3 << GRF_GPIO4B3_SEL_SHIFT, - GRF_SDMMC_DATA3 = 1, - GRF_GPIO4B4_SEL_SHIFT = 8, - GRF_GPIO4B4_SEL_MASK = 3 << GRF_GPIO4B4_SEL_SHIFT, - GRF_SDMMC_CLKOUT = 1, - GRF_GPIO4B5_SEL_SHIFT = 10, - GRF_GPIO4B5_SEL_MASK = 3 << GRF_GPIO4B5_SEL_SHIFT, - GRF_SDMMC_CMD = 1, - - /* GRF_GPIO4C_IOMUX */ - GRF_GPIO4C2_SEL_SHIFT = 4, - GRF_GPIO4C2_SEL_MASK = 3 << GRF_GPIO4C2_SEL_SHIFT, - GRF_PWM_0 = 1, - GRF_GPIO4C3_SEL_SHIFT = 6, - GRF_GPIO4C3_SEL_MASK = 3 << GRF_GPIO4C3_SEL_SHIFT, - GRF_UART2DGBC_SIN = 1, - GRF_GPIO4C4_SEL_SHIFT = 8, - GRF_GPIO4C4_SEL_MASK = 3 << GRF_GPIO4C4_SEL_SHIFT, - GRF_UART2DBGC_SOUT = 1, - GRF_GPIO4C6_SEL_SHIFT = 12, - GRF_GPIO4C6_SEL_MASK = 3 << GRF_GPIO4C6_SEL_SHIFT, - GRF_PWM_1 = 1, - - /* PMUGRF_GPIO0A_IOMUX */ - PMUGRF_GPIO0A6_SEL_SHIFT = 12, - PMUGRF_GPIO0A6_SEL_MASK = 3 << PMUGRF_GPIO0A6_SEL_SHIFT, - PMUGRF_PWM_3A = 1, - - /* PMUGRF_GPIO1A_IOMUX */ - PMUGRF_GPIO1A7_SEL_SHIFT = 14, - PMUGRF_GPIO1A7_SEL_MASK = 3 << PMUGRF_GPIO1A7_SEL_SHIFT, - PMUGRF_SPI1EC_RXD = 2, - - /* PMUGRF_GPIO1B_IOMUX */ - PMUGRF_GPIO1B0_SEL_SHIFT = 0, - PMUGRF_GPIO1B0_SEL_MASK = 3 << PMUGRF_GPIO1B0_SEL_SHIFT, - PMUGRF_SPI1EC_TXD = 2, - PMUGRF_GPIO1B1_SEL_SHIFT = 2, - PMUGRF_GPIO1B1_SEL_MASK = 3 << PMUGRF_GPIO1B1_SEL_SHIFT, - PMUGRF_SPI1EC_CLK = 2, - PMUGRF_GPIO1B2_SEL_SHIFT = 4, - PMUGRF_GPIO1B2_SEL_MASK = 3 << PMUGRF_GPIO1B2_SEL_SHIFT, - PMUGRF_SPI1EC_CSN0 = 2, - PMUGRF_GPIO1B6_SEL_SHIFT = 12, - PMUGRF_GPIO1B6_SEL_MASK = 3 << PMUGRF_GPIO1B6_SEL_SHIFT, - PMUGRF_PWM_3B = 1, - PMUGRF_GPIO1B7_SEL_SHIFT = 14, - PMUGRF_GPIO1B7_SEL_MASK = 3 << PMUGRF_GPIO1B7_SEL_SHIFT, - PMUGRF_I2C0PMU_SDA = 2, - - /* PMUGRF_GPIO1C_IOMUX */ - PMUGRF_GPIO1C0_SEL_SHIFT = 0, - PMUGRF_GPIO1C0_SEL_MASK = 3 << PMUGRF_GPIO1C0_SEL_SHIFT, - PMUGRF_I2C0PMU_SCL = 2, - PMUGRF_GPIO1C3_SEL_SHIFT = 6, - PMUGRF_GPIO1C3_SEL_MASK = 3 << PMUGRF_GPIO1C3_SEL_SHIFT, - PMUGRF_PWM_2 = 1, - -}; static void pinctrl_rk3399_pwm_config(struct rk3399_grf_regs *grf, struct rk3399_pmugrf_regs *pmugrf, int pwm_id) { diff --git a/include/configs/rk3399_common.h b/include/configs/rk3399_common.h index aa646c6..3699a9d 100644 --- a/include/configs/rk3399_common.h +++ b/include/configs/rk3399_common.h @@ -17,12 +17,23 @@ #define CONFIG_SYS_MALLOC_LEN (32 << 20) #define CONFIG_SYS_CBSIZE 1024 #define CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_DRIVERS_MISC_SUPPORT +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT
#define CONFIG_SYS_NS16550_MEM32
#define CONFIG_SYS_TEXT_BASE 0x00200000 #define CONFIG_SYS_INIT_SP_ADDR 0x00300000 #define CONFIG_SYS_LOAD_ADDR 0x00800800 +#define CONFIG_SPL_STACK 0xff8effff +#define CONFIG_SPL_TEXT_BASE 0xff8c2008 +#define CONFIG_SPL_MAX_SIZE 0x30000 +/* BSS setup */ +#define CONFIG_SPL_BSS_START_ADDR 0xff8e0000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x10000
#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* 64M */
diff --git a/include/dt-bindings/clock/rk3399-cru.h b/include/dt-bindings/clock/rk3399-cru.h index 0a86aec..d4bdcc6 100644 --- a/include/dt-bindings/clock/rk3399-cru.h +++ b/include/dt-bindings/clock/rk3399-cru.h @@ -122,6 +122,10 @@ #define SCLK_DPHY_RX0_CFG 165 #define SCLK_RMII_SRC 166 #define SCLK_PCIEPHY_REF100M 167 +#define SCLK_USBPHY0_480M_SRC 168 +#define SCLK_USBPHY1_480M_SRC 169 +#define SCLK_DDRCLK 170 +#define SCLK_TESTOUT2 171
#define DCLK_VOP0 180 #define DCLK_VOP1 181 @@ -589,13 +593,13 @@ #define SRST_P_SPI0 214 #define SRST_P_SPI1 215 #define SRST_P_SPI2 216 -#define SRST_P_SPI3 217 -#define SRST_P_SPI4 218 +#define SRST_P_SPI4 217 +#define SRST_P_SPI5 218 #define SRST_SPI0 219 #define SRST_SPI1 220 #define SRST_SPI2 221 -#define SRST_SPI3 222 -#define SRST_SPI4 223 +#define SRST_SPI4 222 +#define SRST_SPI5 223
/* cru_softrst_con14 */ #define SRST_I2S0_8CH 224 @@ -717,8 +721,8 @@ #define SRST_H_CM0S_NOC 3 #define SRST_DBG_CM0S 4 #define SRST_PO_CM0S 5 -#define SRST_P_SPI6 6 -#define SRST_SPI6 7 +#define SRST_P_SPI3 6 +#define SRST_SPI3 7 #define SRST_P_TIMER_0_1 8 #define SRST_P_TIMER_0 9 #define SRST_P_TIMER_1 10