Hi Tim,
On Thu, Jul 1, 2021 at 8:58 PM Tim Harvey tharvey@gateworks.com wrote:
Fabio,
I no longer have the patches/config around and am not sure I even have a working imx8mm-evk anymore.
Do you have the patches I submitted to enable USB OTG in general on IMX8MM? usb: ehci-mx6: add IMX8MM and IMX8MN OTG support usb: ehci-mx6: move mode set/detect to probe
Thanks for pointing out these patches. Does "ums 0 mmc 0" work for you?
I will have a try.
I would like to get those patches accepted and I think there was some concern that 'usb: ehci-mx6: move mode set/detect to probe' may break gadget support.
I have applied this one and tested on warp7 board via "ums 0 mmc 0" and it still works.
I haven't needed to use SDP in some time (we have JTAG programming support for eMMC now). Let me see if I can get SDP working on imx8mm-venice.
Thanks, appreciate it.
Regards,
Fabio Estevam