10 Jul
2012
10 Jul
'12
9:57 p.m.
I have everything working via openocd I compiled a U-Boot for Dreamplug on a Raspberry Pi and noticed that it isn't configured to support the V10 Dreamplugs. I'm compiling another version as we speak for the guru plug board and will report back on that one.
The V10s don't have SPI/NOR flash anymore, they have 512MB NAND and I think this is causing all of the problems.
--
Steven McGrath
Sent with Sparrow (http://www.sparrowmailapp.com/?sig)
On Tuesday, July 10, 2012 at 11:51 AM, Luka Perkov wrote:
> Hi Steven,
>
> On Tue, Jul 10, 2012 at 10:57:53AM -0500, Steven McGrath wrote:
> > These instructions are great, however they don't work for the newer
> > v10 Dreamplugs. I would be happy to lend my v10 Dreamplug to the cause
> > to get a workable U-Boot for it.
> >
>
>
> Can you please try with kwboot? It's in mainline now, look at commit:
>
> d131ad68c6566749df10154d2a6fa93df5865495
>
> Regards,
> Luka
>
>