-----Original Message----- From: Jagan Teki jagan@amarulasolutions.com Sent: 10 January 2020 11:13 To: Guillaume Gardet Guillaume.Gardet@arm.com Cc: Simon Glass sjg@chromium.org; Lin Huang hl@rock-chips.com; u- boot@lists.denx.de Subject: Re: SPL too large for firefly-rk3288 and tinker-rk3288 since 2020.01
On Fri, Jan 10, 2020 at 3:12 PM Guillaume Gardet Guillaume.Gardet@arm.com wrote:
Hi,
since 2020.01, SPL image is too large for rk3288 boards (at least firefly-rk3288
and tinker-rk3288), because I get respectively:
[ 356s] + ./tools/mkimage -n rk3288 -d spl/u-boot-spl.bin -T rksd u-boot-
spl.rksd
[ 356s] Error: SPL image is too large (size 0x9800 than 0x8000) And: [ 305s] + ./tools/mkimage -n rk3288 -d spl/u-boot-spl.bin -T rksd u-boot-
spl.rksd
[ 305s] Error: SPL image is too large (size 0xb800 than 0x8000)
Both the board now TPL-enabled, so create boot image with TPL then concatenate SPL.
What do you mean by "then concatenate SPL"?