Hi Caleb,
On Wed, 21 Aug 2024 at 07:42, Caleb Connolly caleb.connolly@linaro.org wrote:
For running U-Boot as primary bootloader we must define the memory layout statically.
Signed-off-by: Caleb Connolly caleb.connolly@linaro.org
arch/arm/dts/qcs6490-rb3gen2-u-boot.dtsi | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+)
diff --git a/arch/arm/dts/qcs6490-rb3gen2-u-boot.dtsi b/arch/arm/dts/qcs6490-rb3gen2-u-boot.dtsi new file mode 100644 index 000000000000..c3ec4a317f7c --- /dev/null +++ b/arch/arm/dts/qcs6490-rb3gen2-u-boot.dtsi @@ -0,0 +1,23 @@ +// SPDX-License-Identifier: BSD-3-Clause +/*
- Copyright (c) 2024 Linaro Ltd.
- */
+/ {
/* When running as the primary bootloader there is no prior
We normally have an empty /* on the first line
* stage to populate the memory layout for us. We *should** have two nodes here, but ABL does NOT like that.* sooo we're stuck with this.*/memory@80000000 {device_type = "memory";reg = <0 0x80000000 0 0x3A800000>,<0 0xC0000000 0 0x01800000>,<0 0xC3400000 0 0x3CC00000>,<1 0x00000000 1 0x00000000>;};+};
+// RAM Entry 0 : Base 0x0080000000 Size 0x003A800000 +// RAM Entry 1 : Base 0x00C0000000 Size 0x0001800000 +// RAM Entry 2 : Base 0x00C3400000 Size 0x003CC00000 +// RAM Entry 3 : Base 0x0100000000 Size 0x0100000000
-- 2.46.0
Can you please use lower-case hex?
Regards, Simon