Adds support of Clock and Reset drivers for STM32MP13 platform.
Signed-off-by: Gabriel Fernandez gabriel.fernandez@foss.st.com
---
arch/arm/dts/stm32mp13-u-boot.dtsi | 4 + arch/arm/dts/stm32mp131.dtsi | 119 +++++++++++------------------ arch/arm/dts/stm32mp133.dtsi | 4 +- arch/arm/dts/stm32mp13xf.dtsi | 3 +- 4 files changed, 52 insertions(+), 78 deletions(-)
diff --git a/arch/arm/dts/stm32mp13-u-boot.dtsi b/arch/arm/dts/stm32mp13-u-boot.dtsi index 47a43649bb..3730f474b2 100644 --- a/arch/arm/dts/stm32mp13-u-boot.dtsi +++ b/arch/arm/dts/stm32mp13-u-boot.dtsi @@ -92,6 +92,10 @@ u-boot,dm-pre-reloc; };
+&rcc { + u-boot,dm-pre-reloc; +}; + &scmi { u-boot,dm-pre-reloc; }; diff --git a/arch/arm/dts/stm32mp131.dtsi b/arch/arm/dts/stm32mp131.dtsi index a1c6d0d00b..d893bc24b4 100644 --- a/arch/arm/dts/stm32mp131.dtsi +++ b/arch/arm/dts/stm32mp131.dtsi @@ -4,6 +4,8 @@ * Author: Alexandre Torgue alexandre.torgue@foss.st.com for STMicroelectronics. */ #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/stm32mp13-clks.h> +#include <dt-bindings/reset/stm32mp13-resets.h>
/ { #address-cells = <1>; @@ -52,62 +54,6 @@ }; };
- clocks { - clk_axi: clk-axi { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <266500000>; - }; - - clk_hse: clk-hse { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <24000000>; - }; - - clk_hsi: clk-hsi { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <64000000>; - }; - - clk_lsi: clk-lsi { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <32000>; - }; - - clk_pclk3: clk-pclk3 { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <104438965>; - }; - - clk_pclk4: clk-pclk4 { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <133250000>; - }; - - clk_pll4_p: clk-pll4_p { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <50000000>; - }; - - clk_pll4_r: clk-pll4_r { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <99000000>; - }; - - clk_rtc_k: clk-rtc-k { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <32768>; - }; - }; - intc: interrupt-controller@a0021000 { compatible = "arm,cortex-a7-gic"; #interrupt-cells = <3>; @@ -155,7 +101,8 @@ compatible = "st,stm32h7-uart"; reg = <0x40010000 0x400>; interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_hsi>; + clocks = <&rcc UART4_K>; + resets = <&rcc UART4_R>; status = "disabled"; };
@@ -170,7 +117,8 @@ <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_pclk4>; + clocks = <&rcc DMA1>; + resets = <&rcc DMA1_R>; #dma-cells = <4>; st,mem2mem; dma-requests = <8>; @@ -187,7 +135,8 @@ <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_pclk4>; + clocks = <&rcc DMA2>; + resets = <&rcc DMA2_R>; #dma-cells = <4>; st,mem2mem; dma-requests = <8>; @@ -196,13 +145,29 @@ dmamux1: dma-router@48002000 { compatible = "st,stm32h7-dmamux"; reg = <0x48002000 0x40>; - clocks = <&clk_pclk4>; + clocks = <&rcc DMAMUX1>; + resets = <&rcc DMAMUX1_R>; #dma-cells = <3>; dma-masters = <&dma1 &dma2>; dma-requests = <128>; dma-channels = <16>; };
+ rcc: rcc@50000000 { + compatible = "st,stm32mp13-rcc", "syscon"; + reg = <0x50000000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + + clock-names = "hse", "hsi", "csi", "lse", "lsi"; + clocks = <&scmi_clk CK_SCMI_HSE>, + <&scmi_clk CK_SCMI_HSI>, + <&scmi_clk CK_SCMI_CSI>, + <&scmi_clk CK_SCMI_LSE>, + <&scmi_clk CK_SCMI_LSI>; + }; + exti: interrupt-controller@5000d000 { compatible = "st,stm32mp13-exti", "syscon"; interrupt-controller; @@ -213,14 +178,14 @@ syscfg: syscon@50020000 { compatible = "st,stm32mp157-syscfg", "syscon"; reg = <0x50020000 0x400>; - clocks = <&clk_pclk3>; + clocks = <&rcc SYSCFG>; };
mdma: dma-controller@58000000 { compatible = "st,stm32h7-mdma"; reg = <0x58000000 0x1000>; interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_pclk4>; + clocks = <&rcc MDMA>; #dma-cells = <5>; dma-channels = <32>; dma-requests = <48>; @@ -232,8 +197,9 @@ reg = <0x58005000 0x1000>, <0x58006000 0x1000>; interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "cmd_irq"; - clocks = <&clk_pll4_p>; + clocks = <&rcc SDMMC1_K>; clock-names = "apb_pclk"; + resets = <&rcc SDMMC1_R>; cap-sd-highspeed; cap-mmc-highspeed; max-frequency = <130000000>; @@ -246,8 +212,10 @@ reg = <0x58007000 0x1000>, <0x58008000 0x1000>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "cmd_irq"; - clocks = <&clk_pll4_p>; + clocks = <&rcc SDMMC2_K>; clock-names = "apb_pclk"; + resets = <&rcc SDMMC2_R>; + cap-sd-highspeed; cap-mmc-highspeed; max-frequency = <130000000>; @@ -257,7 +225,7 @@ iwdg2: watchdog@5a002000 { compatible = "st,stm32mp1-iwdg"; reg = <0x5a002000 0x400>; - clocks = <&clk_pclk4>, <&clk_lsi>; + clocks = <&rcc IWDG2>, <&scmi_clk CK_SCMI_LSI>; clock-names = "pclk", "lsi"; status = "disabled"; }; @@ -266,7 +234,8 @@ compatible = "st,stm32mp1-rtc"; reg = <0x5c004000 0x400>; interrupts-extended = <&exti 19 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_pclk4>, <&clk_rtc_k>; + clocks = <&scmi_clk CK_SCMI_RTCAPB>, + <&scmi_clk CK_SCMI_RTC>; clock-names = "pclk", "rtc_ck"; status = "disabled"; }; @@ -307,7 +276,7 @@ interrupt-controller; #interrupt-cells = <2>; reg = <0x0 0x400>; - clocks = <&clk_pclk4>; + clocks = <&rcc GPIOA>; st,bank-name = "GPIOA"; ngpios = <16>; gpio-ranges = <&pinctrl 0 0 16>; @@ -319,7 +288,7 @@ interrupt-controller; #interrupt-cells = <2>; reg = <0x1000 0x400>; - clocks = <&clk_pclk4>; + clocks = <&rcc GPIOB>; st,bank-name = "GPIOB"; ngpios = <16>; gpio-ranges = <&pinctrl 0 16 16>; @@ -331,7 +300,7 @@ interrupt-controller; #interrupt-cells = <2>; reg = <0x2000 0x400>; - clocks = <&clk_pclk4>; + clocks = <&rcc GPIOC>; st,bank-name = "GPIOC"; ngpios = <16>; gpio-ranges = <&pinctrl 0 32 16>; @@ -343,7 +312,7 @@ interrupt-controller; #interrupt-cells = <2>; reg = <0x3000 0x400>; - clocks = <&clk_pclk4>; + clocks = <&rcc GPIOD>; st,bank-name = "GPIOD"; ngpios = <16>; gpio-ranges = <&pinctrl 0 48 16>; @@ -355,7 +324,7 @@ interrupt-controller; #interrupt-cells = <2>; reg = <0x4000 0x400>; - clocks = <&clk_pclk4>; + clocks = <&rcc GPIOE>; st,bank-name = "GPIOE"; ngpios = <16>; gpio-ranges = <&pinctrl 0 64 16>; @@ -367,7 +336,7 @@ interrupt-controller; #interrupt-cells = <2>; reg = <0x5000 0x400>; - clocks = <&clk_pclk4>; + clocks = <&rcc GPIOF>; st,bank-name = "GPIOF"; ngpios = <16>; gpio-ranges = <&pinctrl 0 80 16>; @@ -379,7 +348,7 @@ interrupt-controller; #interrupt-cells = <2>; reg = <0x6000 0x400>; - clocks = <&clk_pclk4>; + clocks = <&rcc GPIOG>; st,bank-name = "GPIOG"; ngpios = <16>; gpio-ranges = <&pinctrl 0 96 16>; @@ -391,7 +360,7 @@ interrupt-controller; #interrupt-cells = <2>; reg = <0x7000 0x400>; - clocks = <&clk_pclk4>; + clocks = <&rcc GPIOH>; st,bank-name = "GPIOH"; ngpios = <15>; gpio-ranges = <&pinctrl 0 112 15>; @@ -403,7 +372,7 @@ interrupt-controller; #interrupt-cells = <2>; reg = <0x8000 0x400>; - clocks = <&clk_pclk4>; + clocks = <&rcc GPIOI>; st,bank-name = "GPIOI"; ngpios = <8>; gpio-ranges = <&pinctrl 0 128 8>; diff --git a/arch/arm/dts/stm32mp133.dtsi b/arch/arm/dts/stm32mp133.dtsi index 0fb1386257..531c263c9f 100644 --- a/arch/arm/dts/stm32mp133.dtsi +++ b/arch/arm/dts/stm32mp133.dtsi @@ -15,7 +15,7 @@ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "int0", "int1"; - clocks = <&clk_hse>, <&clk_pll4_r>; + clocks = <&scmi_clk CK_SCMI_HSE>, <&rcc FDCAN_K>; clock-names = "hclk", "cclk"; bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>; status = "disabled"; @@ -28,7 +28,7 @@ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "int0", "int1"; - clocks = <&clk_hse>, <&clk_pll4_r>; + clocks = <&scmi_clk CK_SCMI_HSE>, <&rcc FDCAN_K>; clock-names = "hclk", "cclk"; bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>; status = "disabled"; diff --git a/arch/arm/dts/stm32mp13xf.dtsi b/arch/arm/dts/stm32mp13xf.dtsi index fa6889e305..4d00e75928 100644 --- a/arch/arm/dts/stm32mp13xf.dtsi +++ b/arch/arm/dts/stm32mp13xf.dtsi @@ -10,7 +10,8 @@ compatible = "st,stm32mp1-cryp"; reg = <0x54002000 0x400>; interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_axi>; + clocks = <&rcc CRYP1>; + resets = <&rcc CRYP1_R>; status = "disabled"; }; };