Could you tell me which kernel version is used? I'm try to use mkimage to create a flash-image that can be used by bootm, but until now I'm failed. Hongda Zhao ----- Original Message ----- From: "Jacob Chan" jacob_chan@so-net.net.tw To: "u-boot" u-boot-users@lists.sourceforge.net Sent: Tuesday, July 01, 2003 4:26 PM Subject: [U-Boot-Users] How can I save zImage & fsimage.tar into Flash memory then boot
Dear all, I am using the Intel DBPXA255 Lubbock board. After I download the u-boot.bin via JTAG that using BDI2000. It can boot but the Ethernet device(SMSC LAN91C96) is not work. So I using serial download(Kermit mode) zImage to the address 0xa0200000. loadb 0xa0200000 <-- using HyperTerminal Kermit mode to download After that I can using go 0xa0200000 to boot linux kernel, but how can I save it to Flash? I try cp 0xa0200000 0x00080000 0x000a0578 After that I reboot the target board and how can I boot the linux kernel? I use bootm 0x00080000, but it's not work. Finally, I wan to save u-boot.bin, zImage and filesystem.tar into Flash then boot. What should I need to do? Your reply and support will be highly appreciated.
Thank you for your time and attention
Jacob Chan Jacob_chan@so-net.net.tw
This SF.Net email sponsored by: Free pre-built ASP.NET sites including Data Reports, E-commerce, Portals, and Forums are available now. Download today and enter to win an XBOX or Visual Studio .NET. http://aspnet.click-url.com/go/psa00100006ave/direct;at.asp_061203_01/01 _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users