The environment variable "disable_giga" can now be used to disable 1000baseTx on the Micrel's KSZ9031.
Signed-off-by: Sebastien Bourdelin sebastien.bourdelin@savoirfairelinux.com
--- Changes v1 -> v2: - move variables declaration in concern block and remove useless initialisation (suggested by Joe Hershberger joe.hershberger@ni.com - v1 acked by Joe Hershberger joe.hershberger@ni.com --- drivers/net/phy/micrel.c | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+)
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index 0e4a4ebcc6..ed26294846 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -497,6 +497,33 @@ static int ksz9031_config(struct phy_device *phydev) ret = ksz9031_center_flp_timing(phydev); if (ret) return ret; + + /* add an option to disable the gigabit feature of this PHY */ + if (getenv("disable_giga")) { + unsigned features; + unsigned bmcr; + + /* disable speed 1000 in features supported by the PHY */ + features = phydev->drv->features; + features &= ~(SUPPORTED_1000baseT_Half | + SUPPORTED_1000baseT_Full); + phydev->advertising = phydev->supported = features; + + /* disable speed 1000 in Basic Control Register */ + bmcr = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMCR); + bmcr &= ~(1 << 6); + phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, bmcr); + + /* disable speed 1000 in 1000Base-T Control Register */ + phy_write(phydev, MDIO_DEVAD_NONE, MII_CTRL1000, 0); + + /* start autoneg */ + genphy_config_aneg(phydev); + genphy_restart_aneg(phydev); + + return 0; + } + return genphy_config(phydev); }