The Marvell documentation for the 88f6281 states that the error coding is only valid if the error summary and last frame bits in the transmit descriptor status field are set. This patch adds checks for these for transmit (I would get transmit errors on bootp with the current check, which I believe are spurious).
Signed-off-by: Simon Kagstrom simon.kagstrom@netinsight.net --- drivers/net/kirkwood_egiga.c | 4 +++- drivers/net/kirkwood_egiga.h | 1 + 2 files changed, 4 insertions(+), 1 deletions(-)
diff --git a/drivers/net/kirkwood_egiga.c b/drivers/net/kirkwood_egiga.c index 9cab7fd..537343f 100644 --- a/drivers/net/kirkwood_egiga.c +++ b/drivers/net/kirkwood_egiga.c @@ -511,7 +511,9 @@ static int kwgbe_send(struct eth_device *dev, volatile void *dataptr, cmd_sts = readl(&p_txdesc->cmd_sts); while (cmd_sts & KWGBE_BUFFER_OWNED_BY_DMA) { /* return fail if error is detected */ - if (cmd_sts & (KWGBE_UR_ERROR | KWGBE_RL_ERROR)) { + if ((cmd_sts & (KWGBE_ERROR_SUMMARY | KWGBE_TX_LAST_FRAME)) == + (KWGBE_ERROR_SUMMARY | KWGBE_TX_LAST_FRAME) && + cmd_sts & (KWGBE_UR_ERROR | KWGBE_RL_ERROR)) { printf("Err..(%s) in xmit packet\n", __FUNCTION__); return -1; } diff --git a/drivers/net/kirkwood_egiga.h b/drivers/net/kirkwood_egiga.h index 8b67c9c..9c893d1 100644 --- a/drivers/net/kirkwood_egiga.h +++ b/drivers/net/kirkwood_egiga.h @@ -256,6 +256,7 @@ #define KWGBE_UR_ERROR (1 << 1) #define KWGBE_RL_ERROR (1 << 2) #define KWGBE_LLC_SNAP_FORMAT (1 << 9) +#define KWGBE_TX_LAST_FRAME (1 << 20)
/* Rx descriptors status */ #define KWGBE_CRC_ERROR 0