The block interface has two separate implementations, one using driver model and one not. The latter is really only needed for SPL, where size constraints allegedly don't allow use of driver model. Of course we still need space for filesystems and other code, so it isn't clear that driver model is anything more than the straw that breaks the camel's back.
The driver model version uses a uclass ID for the interface time, but converts back and forth between that and if_type, which is the legacy type.
The HAVE_BLOCK_DEVICE define is mostly a hangover from the old days. At present its main purpose is to enable the legacy block implementation in SPL.
Finally the use of 'select' to enable BLK does not work very well. It causes kconfig errors when another option depends on BLK and it is not recommended by the kconfig style guide.
This series aims to clean things up: - Enable BLK based on whether different media types are used, but still allow boards to disable it - Rename HAVE_BLOCK_DEVICE to indicates its real purpose - Drop if_type and use the uclass instead - Drop some obsolete if_type values
An issue not resolved by this series is that the sandbox host interface does not actually have a device. At present it uses the root device, which was convenience for the driver model conversion but not really correct. It should be possible to clean this up, in a future series.
Another minor issue is the use of UCLASS_USB for a mass-storage device. This has been the case for a while and is not addresed by this series, other than to add a comment.
Note that this test relies on Tom Rini's series to drop various boards including warp and cm_t335
Finally, a patch is included to make binman put fake files in a subdirectory, since repeated runs of certain boards can cause unrelated failues (e.g. chromebook_coral) when fake files are left around.
Changes in v2: - Update commit message - Fix SPL_PARTITIONS too - Add SATA also - Refer to a suffix, not a prefix - Add new patch to handle UCLASS_EFI_MEDIA in dev_print() - Add new patch to drop ifname field from struct efi_disk_obj - Use conv_uclass_id() instead of the confusing uclass_id_to_uclass_id()
Simon Glass (24): disk: Correct help for TPL_PARTITIONS blk: Enable CONFIG_BLK for all media ata: Fix an instance of SPL_SATA_SUPPORT sandbox: Avoid defining HAVE_BLOCK_DEVICE in Konfig disk: Use Makefile to omit partition drivers blk: Use a function for whether block devices are available cmd: Drop use of HAVE_BLOCK_DEVICE blk: Drop unnecessary #ifdef in in blk_legacy blk: Rename HAVE_BLOCK_DEVICE blk: Select SPL_LEGACY_BLOCK automatically blk: Drop unnecessary CONFIG_SPL_LEGACY_BLOCK in defconfigs blk: Hide the BLK and SPL_LEGACY_BLOCK options blk: Drop IF_TYPE_DOC ide: Use a flag for an ATAPI device blk: Drop IF_TYPE_ATAPI blk: Drop IF_TYPE_SD blk: Rename var in blk_get_devnum_by_typename() blk: Rewrite if_type to name functions efi: Correct assumption about if_type blk: Switch over to using uclass IDs disk: Handle UCLASS_EFI_MEDIA in dev_print() blk: Drop if_type efi: Drop ifname field from struct efi_disk_obj blk: Rename if_type to uclass_id
arch/Kconfig | 1 - arch/arm/Kconfig | 1 - .../mach-stm32mp/cmd_stm32prog/stm32prog.c | 4 +- board/st/common/stm32mp_dfu.c | 2 +- board/toradex/common/tdx-cfg-block.c | 4 +- cmd/Kconfig | 5 - cmd/Makefile | 2 +- cmd/bcb.c | 4 +- cmd/blk_common.c | 18 +- cmd/ide.c | 2 +- cmd/lsblk.c | 2 +- cmd/mmc.c | 10 +- cmd/mvebu/bubt.c | 2 +- cmd/nvme.c | 4 +- cmd/pvblock.c | 2 +- cmd/sata.c | 4 +- cmd/scsi.c | 2 +- cmd/usb.c | 2 +- cmd/virtio.c | 2 +- common/spl/Kconfig | 2 - common/spl/spl_sata.c | 2 +- common/spl/spl_usb.c | 2 +- common/usb_storage.c | 10 +- configs/M5253DEMO_defconfig | 1 + configs/axm_defconfig | 1 - configs/bcm968380gerg_ram_defconfig | 1 - .../gardena-smart-gateway-mt7688_defconfig | 1 - configs/nsim_hs38_defconfig | 1 - configs/qemu-ppce500_defconfig | 1 - disk/Kconfig | 8 +- disk/Makefile | 4 + disk/disk-uclass.c | 11 +- disk/part.c | 161 ++++++------- disk/part_amiga.c | 4 - disk/part_dos.c | 4 - disk/part_efi.c | 3 - disk/part_iso.c | 3 - disk/part_mac.c | 3 - doc/develop/driver-model/migration.rst | 2 +- doc/develop/uefi/uefi.rst | 2 +- doc/usage/partitions.rst | 2 +- drivers/Makefile | 3 +- drivers/ata/Kconfig | 4 +- drivers/ata/dwc_ahsata.c | 2 +- drivers/ata/fsl_sata.c | 2 +- drivers/ata/sata.c | 2 +- drivers/ata/sata_mv.c | 2 +- drivers/ata/sata_sil.c | 2 +- drivers/block/Kconfig | 20 +- drivers/block/Makefile | 2 +- drivers/block/blk-uclass.c | 219 +++++++++--------- drivers/block/blk_legacy.c | 60 +++-- drivers/block/efi_blk.c | 2 +- drivers/block/ide.c | 16 +- drivers/block/sandbox.c | 14 +- drivers/dfu/dfu_mmc.c | 6 +- drivers/mmc/Kconfig | 1 - drivers/mmc/mmc-uclass.c | 12 +- drivers/mmc/mmc_legacy.c | 8 +- drivers/mmc/mmc_write.c | 4 +- drivers/net/fsl_enetc.c | 12 +- drivers/net/fsl_enetc.h | 2 +- drivers/nvme/Kconfig | 2 - drivers/nvme/nvme.c | 2 +- drivers/scsi/Kconfig | 2 - drivers/scsi/scsi.c | 12 +- drivers/tee/optee/rpmb.c | 4 +- drivers/virtio/Kconfig | 1 - drivers/virtio/virtio_blk.c | 4 +- drivers/xen/Kconfig | 1 - drivers/xen/pvblock.c | 6 +- env/mmc.c | 4 +- fs/fat/fat.c | 4 +- include/blk.h | 141 +++++------ include/efi_api.h | 4 +- include/efi_loader.h | 4 +- include/mmc.h | 2 +- lib/efi_driver/efi_block_device.c | 4 +- lib/efi_loader/Kconfig | 1 - lib/efi_loader/efi_device_path.c | 2 +- lib/efi_loader/efi_device_path_to_text.c | 4 +- lib/efi_loader/efi_disk.c | 28 ++- lib/efi_loader/efi_net.c | 2 +- lib/efi_loader/efi_var_file.c | 4 +- test/dm/blk.c | 24 +- 85 files changed, 444 insertions(+), 515 deletions(-)