Signed-off-by: Albert ARIBAUD albert.u.boot@aribaud.net ---
This patch adds the Wireless Space to the lacie_kw sub-targets. It *should* not change a thing to the already existing sub-targets (except that each one gets its own prompt).
Owners of NETSPACE_[MAX]_V2, INETSPACE_V2, NET2BIG_V2 please test.
board/LaCie/netspace_v2/netspace_v2.c | 42 ++---------- board/LaCie/netspace_v2/netspace_v2.h | 121 +++++++++++++++++++++++++++++++++ boards.cfg | 1 + drivers/net/mvgbe.c | 10 ++- include/configs/lacie_kw.h | 38 ++++++++++- 5 files changed, 175 insertions(+), 37 deletions(-)
diff --git a/board/LaCie/netspace_v2/netspace_v2.c b/board/LaCie/netspace_v2/netspace_v2.c index 68e8a77..084f0cf 100644 --- a/board/LaCie/netspace_v2/netspace_v2.c +++ b/board/LaCie/netspace_v2/netspace_v2.c @@ -39,40 +39,7 @@ int board_early_init_f(void) NETSPACE_V2_OE_LOW, NETSPACE_V2_OE_HIGH);
/* Multi-Purpose Pins Functionality configuration */ - u32 kwmpp_config[] = { - MPP0_SPI_SCn, - MPP1_SPI_MOSI, - MPP2_SPI_SCK, - MPP3_SPI_MISO, - MPP4_NF_IO6, - MPP5_NF_IO7, - MPP6_SYSRST_OUTn, - MPP7_GPO, /* Fan speed (bit 1) */ - MPP8_TW_SDA, - MPP9_TW_SCK, - MPP10_UART0_TXD, - MPP11_UART0_RXD, - MPP12_GPO, /* Red led */ - MPP14_GPIO, /* USB fuse */ - MPP16_GPIO, /* SATA 0 power */ - MPP17_GPIO, /* SATA 1 power */ - MPP18_NF_IO0, - MPP19_NF_IO1, - MPP20_SATA1_ACTn, - MPP21_SATA0_ACTn, - MPP22_GPIO, /* Fan speed (bit 0) */ - MPP23_GPIO, /* Fan power */ - MPP24_GPIO, /* USB mode select */ - MPP25_GPIO, /* Fan rotation fail */ - MPP26_GPIO, /* USB vbus-in detection */ - MPP28_GPIO, /* USB enable vbus-out */ - MPP29_GPIO, /* Blue led (slow register) */ - MPP30_GPIO, /* Blue led (command register) */ - MPP31_GPIO, /* Board power off */ - MPP32_GPIO, /* Button (0 = Released, 1 = Pushed) */ - MPP33_GPIO, /* Fan speed (bit 2) */ - 0 - }; + u32 kwmpp_config[] = NETSPACE_V2_MPP_CONFIG; kirkwood_mpp_conf(kwmpp_config, NULL);
return 0; @@ -107,7 +74,12 @@ int misc_init_r(void) /* Configure and initialize PHY */ void reset_phy(void) { - mv_phy_88e1116_init("egiga0", 8); +#ifdef CONFIG_EGIGA0_PHY + mv_phy_88e1116_init("egiga0", CONFIG_EGIGA0_PHY); +#endif +#ifdef CONFIG_EGIGA1_PHY + mv_phy_88e1116_init("egiga1", CONFIG_EGIGA1_PHY); +#endif } #endif
diff --git a/board/LaCie/netspace_v2/netspace_v2.h b/board/LaCie/netspace_v2/netspace_v2.h index 34e492c..fc1d571 100644 --- a/board/LaCie/netspace_v2/netspace_v2.h +++ b/board/LaCie/netspace_v2/netspace_v2.h @@ -24,11 +24,132 @@ #define NETSPACE_V2_H
/* GPIO configuration */ + +/* Net Space V2, Net Space Max V2, Internet Space V2: */ +#if defined(CONFIG_NETSPACE_MAX_V2) \ + || defined(CONFIG_NETSPACE_V2) \ + || defined(CONFIG_NET2BIG_V2) \ + || defined(CONFIG_INETSPACE_V2) + #define NETSPACE_V2_OE_LOW 0x06004000 #define NETSPACE_V2_OE_HIGH 0x00000031 #define NETSPACE_V2_OE_VAL_LOW 0x10030000 #define NETSPACE_V2_OE_VAL_HIGH 0x00000000
+/* Wireless Space */ + +#elif defined(CONFIG_WIRELESS_SPACE) + +#define NETSPACE_V2_OE_LOW 0xFF006808 +#define NETSPACE_V2_OE_HIGH 0x0000F989 +#define NETSPACE_V2_OE_VAL_LOW 0x00000000 +#define NETSPACE_V2_OE_VAL_HIGH 0x00000000 + +#else + +#error Undefined or unsupported LaCie KW board variant + +#endif + #define NETSPACE_V2_GPIO_BUTTON 32
+/* MPP configuration */ + +/* Net Space V2, Net Space Max V2, Internet Space V2: */ +#if defined(CONFIG_NETSPACE_MAX_V2) \ + || defined(CONFIG_NETSPACE_V2) \ + || defined(CONFIG_NET2BIG_V2) \ + || defined(CONFIG_INETSPACE_V2) + +#define NETSPACE_V2_MPP_CONFIG { \ + MPP0_SPI_SCn, \ + MPP1_SPI_MOSI, \ + MPP2_SPI_SCK, \ + MPP3_SPI_MISO, \ + MPP4_NF_IO6, \ + MPP5_NF_IO7, \ + MPP6_SYSRST_OUTn, \ + MPP7_GPO, /* Fan speed (bit 1) */ \ + MPP8_TW_SDA, \ + MPP9_TW_SCK, \ + MPP10_UART0_TXD, \ + MPP11_UART0_RXD, \ + MPP12_GPO, /* Red led */ \ + MPP14_GPIO, /* USB fuse */ \ + MPP16_GPIO, /* SATA 0 power */ \ + MPP17_GPIO, /* SATA 1 power */ \ + MPP18_NF_IO0, \ + MPP19_NF_IO1, \ + MPP20_SATA1_ACTn, \ + MPP21_SATA0_ACTn, \ + MPP22_GPIO, /* Fan speed (bit 0) */ \ + MPP23_GPIO, /* Fan power */ \ + MPP24_GPIO, /* USB mode select */ \ + MPP25_GPIO, /* Fan rotation fail */ \ + MPP26_GPIO, /* USB vbus-in detection */ \ + MPP28_GPIO, /* USB enable vbus-out */ \ + MPP29_GPIO, /* Blue led (slow register) */ \ + MPP30_GPIO, /* Blue led (command register) */ \ + MPP31_GPIO, /* Board power off */ \ + MPP32_GPIO, /* Button (0 = Released, 1 = Pushed) */ \ + MPP33_GPIO, /* Fan speed (bit 2) */ \ + 0 \ + } + +#elif defined(CONFIG_WIRELESS_SPACE) + +#define NETSPACE_V2_MPP_CONFIG { \ + MPP0_NF_IO2, \ + MPP1_NF_IO3, \ + MPP2_NF_IO4, \ + MPP3_NF_IO5, \ + MPP4_NF_IO6, \ + MPP5_NF_IO7, \ + MPP6_SYSRST_OUTn, \ + MPP7_GPO, /* Fan speed (bit 1) */ \ + MPP8_TW_SDA, \ + MPP9_TW_SCK, \ + MPP10_UART0_TXD, \ + MPP11_UART0_RXD, \ + MPP13_GPIO, /* Red led */ \ + MPP14_GPIO, /* USB fuse */ \ + MPP15_SATA0_ACTn, \ + MPP16_GPIO, /* SATA 0 power */ \ + MPP17_GPIO, /* SATA 1 power */ \ + MPP18_NF_IO0, \ + MPP19_NF_IO1, \ + MPP20_GE1_0, /* Gigabit Ethernet 1 */ \ + MPP21_GE1_1, \ + MPP22_GE1_2, \ + MPP23_GE1_3, \ + MPP24_GE1_4, \ + MPP25_GE1_5, \ + MPP26_GE1_6, \ + MPP27_GE1_7, \ + MPP28_GE1_8, \ + MPP29_GE1_9, \ + MPP30_GE1_10, \ + MPP31_GE1_11, \ + MPP32_GE1_12, \ + MPP33_GE1_13, \ + MPP34_GE1_14, \ + MPP35_GE1_15, \ + MPP36_GPIO, /* Fan speed (bit 2) */ \ + MPP37_GPIO, /* Fan speed (bit 0) */ \ + MPP38_GPIO, /* Fan power */ \ + MPP39_GPIO, /* Fan rotation fail */ \ + MPP40_GPIO, /* Ethernet switch link */ \ + MPP41_GPIO, /* USB enable host vbus */ \ + MPP42_GPIO, /* LED clock control */ \ + MPP43_GPIO, /* WPS button (0 = Pushed, 1 = Released) */ \ + MPP44_GPIO, /* Red LED on/off */ \ + MPP45_GPIO, /* Red LED timer blink (on=100ms, off=100ms) */ \ + MPP46_GPIO, /* Green LED on/off */ \ + MPP47_GPIO, /* LED (blue, green) SATA activity blink */ \ + MPP48_GPIO, /* Blue LED on/off */ \ + 0 \ + } + +#endif + #endif /* NETSPACE_V2_H */ diff --git a/boards.cfg b/boards.cfg index edd750c..f001b29 100644 --- a/boards.cfg +++ b/boards.cfg @@ -157,6 +157,7 @@ inetspace_v2 arm arm926ejs netspace_v2 LaCie net2big_v2 arm arm926ejs net2big_v2 LaCie kirkwood lacie_kw:NET2BIG_V2 netspace_max_v2 arm arm926ejs netspace_v2 LaCie kirkwood lacie_kw:NETSPACE_MAX_V2 netspace_v2 arm arm926ejs netspace_v2 LaCie kirkwood lacie_kw:NETSPACE_V2 +wireless_space arm arm926ejs netspace_v2 LaCie kirkwood lacie_kw:WIRELESS_SPACE dreamplug arm arm926ejs - Marvell kirkwood guruplug arm arm926ejs - Marvell kirkwood mv88f6281gtw_ge arm arm926ejs - Marvell kirkwood diff --git a/drivers/net/mvgbe.c b/drivers/net/mvgbe.c index 47bf27c..670edb0 100644 --- a/drivers/net/mvgbe.c +++ b/drivers/net/mvgbe.c @@ -653,6 +653,14 @@ int mvgbe_initialize(bd_t *bis) struct eth_device *dev; int devnum; u8 used_ports[MAX_MVGBE_DEVS] = CONFIG_MVGBE_PORTS; +#if defined(CONFIG_MVGBE_PHY_ADRS) +#define MVGBE_PHY_ADRS CONFIG_MVGBE_PHY_ADRS +#elif defined(CONFIG_PHY_BASE_ADR) +#define MVGBE_PHY_ADRS {CONFIG_PHY_BASE_ADR,CONFIG_PHY_BASE_ADR+1} +#else +#define MVGBE_PHY_ADRS {8,9} +#endif + u8 used_phy_adrs[MAX_MVGBE_DEVS] = MVGBE_PHY_ADRS;
for (devnum = 0; devnum < MAX_MVGBE_DEVS; devnum++) { /*skip if port is configured not to use */ @@ -733,7 +741,7 @@ error1: miiphy_register(dev->name, smi_reg_read, smi_reg_write); /* Set phy address of the port */ miiphy_write(dev->name, MV_PHY_ADR_REQUEST, - MV_PHY_ADR_REQUEST, PHY_BASE_ADR + devnum); + MV_PHY_ADR_REQUEST, used_phy_adrs[devnum]); #endif } return 0; diff --git a/include/configs/lacie_kw.h b/include/configs/lacie_kw.h index c35c2db..a979ab4 100644 --- a/include/configs/lacie_kw.h +++ b/include/configs/lacie_kw.h @@ -33,6 +33,10 @@ #elif defined(CONFIG_NET2BIG_V2) #define CONFIG_MACH_TYPE MACH_TYPE_NET2BIG_V2 #define CONFIG_IDENT_STRING " 2Big v2" +#elif defined(CONFIG_WIRELESS_SPACE) +#define MACH_TYPE_WIRELESS_SPACE 2500 /* is missing in mach-types.h */ +#define CONFIG_MACH_TYPE MACH_TYPE_WIRELESS_SPACE +#define CONFIG_IDENT_STRING " Wireless Space" #else #error "Unknown board" #endif @@ -73,6 +77,12 @@ #define CONFIG_SYS_KWD_CONFIG $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage-is2.cfg #endif
+#ifdef CONFIG_WIRELESS_SPACE +/* No SPI but NAND */ +#undef CONFIG_CMD_SF +#define CONFIG_CMD_NAND +#endif + /* * mv-common.h should be defined after CMD configs since it used them * to enable certain macros @@ -90,8 +100,14 @@ #define CONFIG_SYS_IDE_MAXDEVICE 1 #if defined(CONFIG_NET2BIG_V2) #define CONFIG_SYS_PROMPT "2big2> " -#else +#elif defined(CONFIG_NETSPACE_V2) #define CONFIG_SYS_PROMPT "ns2> " +#elif defined(CONFIG_INETSPACE_V2) +#define CONFIG_SYS_PROMPT "is2> " +#elif defined(CONFIG_WIRELESS_SPACE) +#define CONFIG_SYS_PROMPT "ws> " +#else +#define CONFIG_SYS_PROMPT "lacie-kw> " #endif
/* @@ -99,7 +115,16 @@ */ #ifdef CONFIG_CMD_NET #define CONFIG_MISC_INIT_R /* Call misc_init_r() to initialize MAC address */ +#if defined(CONFIG_WIRELESS_SPACE) +#define CONFIG_MVGBE_PORTS {1, 1} /* enable both ports only */ +#define CONFIG_EGIGA1_PHY 0x6 /* egiga1 has a PHY, egiga0 has NOT */ +#define CONFIG_MVGBE_PHY_ADRS {0xa, 0x6} +#define CONFIG_MII +#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN +#else #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ +#define CONFIG_EGIGA0_PHY 0x8 +#endif #define CONFIG_NETCONSOLE #endif
@@ -154,11 +179,20 @@ /* * Environment variables configurations */ + +#if defined(CONFIG_WIRELESS_SPACE) +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_SECT_SIZE 0x10000 /* 64KB */ +#define CONFIG_ENV_SIZE 0x1000 /* 4KB */ +#define CONFIG_ENV_ADDR 0x70000 +#define CONFIG_ENV_OFFSET 0x70000 /* env starts here */ +#else #define CONFIG_ENV_IS_IN_SPI_FLASH #define CONFIG_ENV_SECT_SIZE 0x10000 /* 64KB */ #define CONFIG_ENV_SIZE 0x1000 /* 4KB */ #define CONFIG_ENV_ADDR 0x70000 #define CONFIG_ENV_OFFSET 0x70000 /* env starts here */ +#endif
/* * Default environment variables @@ -185,4 +219,6 @@ "usbload=usb start && " \ "fatload usb 0:1 $loadaddr /boot/$bootfile\0"
+//#define DEBUG + #endif /* _CONFIG_LACIE_KW_H */