Hi Wolfgang,
On 08.02.2012 16:23, Wolfgang Grandegger wrote:
Cc: Stefano Babic sbabic@denx.de Cc: Jason Liu jason.hui@linaro.org Signed-off-by: Wolfgang Grandegger wg@denx.de
board/freescale/mx6qsabrelite/mx6qsabrelite.c | 12 ++++++++++++ include/configs/mx6qsabrelite.h | 15 +++++++++++++++ 2 files changed, 27 insertions(+), 0 deletions(-)
diff --git a/board/freescale/mx6qsabrelite/mx6qsabrelite.c b/board/freescale/mx6qsabrelite/mx6qsabrelite.c index 4028789..01ecec4 100644 --- a/board/freescale/mx6qsabrelite/mx6qsabrelite.c +++ b/board/freescale/mx6qsabrelite/mx6qsabrelite.c @@ -77,6 +77,18 @@ static void setup_iomux_uart(void) imx_iomux_v3_setup_multiple_pads(uart2_pads, ARRAY_SIZE(uart2_pads)); }
+#ifdef CONFIG_USB_EHCI_MX6 +int board_ehci_hcd_init(int port) +{
- imx_iomux_v3_setup_multiple_pads(usb_pads, ARRAY_SIZE(usb_pads));
Where is the definition of 'usb_pads'?
mx6qsabrelite.c: error: 'usb_pads' undeclared (first use in this function)
- /* Reset USB hub */
- gpio_direction_output(204, 0); /* GPIO 7-12 */
With
http://git.denx.de/?p=u-boot/u-boot-imx.git;a=commitdiff;h=7861b0f3eb638df23...
we might want to use something like
gpio_direction_output(GPIO_NUMBER(7, 12), 0);
?
Same below for gpio_set_value() ?
- mdelay(2);
- gpio_set_value(204, 1);
+}
mx6qsabrelite.c: warning: no return statement in function returning non-void
Best regards
Dirk