From: Denis Zalevskiy denis.zalevskiy@ge.com
The bus is statically defined, so remove redundant parameters from read_vpd() for PPD and Bx50v3.
Signed-off-by: Denis Zalevskiy denis.zalevskiy@ge.com Signed-off-by: Fabien Lahoudere fabien.lahoudere@collabora.com --- board/ge/bx50v3/bx50v3.c | 6 +++--- board/ge/mx53ppd/mx53ppd.c | 6 +++--- 2 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/board/ge/bx50v3/bx50v3.c b/board/ge/bx50v3/bx50v3.c index b2d065c..c3c6ded 100644 --- a/board/ge/bx50v3/bx50v3.c +++ b/board/ge/bx50v3/bx50v3.c @@ -623,14 +623,14 @@ static void process_vpd(struct vpd_cache *vpd) eth_env_set_enetaddr_by_index("eth", i210_index, vpd->mac2); }
-static int read_vpd(uint eeprom_bus) +static int read_vpd(void) { int res; int size = 1024; uint8_t *data; unsigned int current_i2c_bus = i2c_get_bus_num();
- res = i2c_set_bus_num(eeprom_bus); + res = i2c_set_bus_num(CONFIG_SYS_I2C_EEPROM_BUS); if (res < 0) return res;
@@ -714,7 +714,7 @@ int board_init(void) setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2); setup_i2c(3, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info3);
- read_vpd(CONFIG_SYS_I2C_EEPROM_BUS); + read_vpd();
set_confidx(&vpd);
diff --git a/board/ge/mx53ppd/mx53ppd.c b/board/ge/mx53ppd/mx53ppd.c index cf278e8..62137f6 100644 --- a/board/ge/mx53ppd/mx53ppd.c +++ b/board/ge/mx53ppd/mx53ppd.c @@ -328,7 +328,7 @@ static void process_vpd(struct vpd_cache *vpd) eth_env_set_enetaddr("ethaddr", vpd->mac1); }
-static int read_vpd(uint eeprom_bus) +static int read_vpd(void) { struct vpd_cache vpd; int res; @@ -336,7 +336,7 @@ static int read_vpd(uint eeprom_bus) u8 *data; unsigned int current_i2c_bus = i2c_get_bus_num();
- res = i2c_set_bus_num(eeprom_bus); + res = i2c_set_bus_num(VPD_EEPROM_BUS); if (res < 0) return res;
@@ -390,7 +390,7 @@ int board_late_init(void) { int res;
- read_vpd(VPD_EEPROM_BUS); + read_vpd();
res = clock_1GHz(); if (res != 0)