On 9/14/23 08:48, Wu, Fei wrote:
On 9/14/2023 2:05 PM, Heinrich Schuchardt wrote:
Am 14. September 2023 07:30:55 MESZ schrieb Fei Wu fei2.wu@intel.com:
In order to enable PCIe passthrough on qemu riscv, the physical memory range between 3GB and 4GB is reserved. Therefore if guest has 4GB ram, two ranges are created as [2G, 3G) and [4G, 7G), currently u-boot sets ram_top to 4G - 1 if the gd->ram_top is above 4G in
This should move to 7GiB - 1 in your example on riscv64.
I'm describing the current implementation of board_get_usable_ram_top() in ./arch/riscv/cpu/generic/dram.c. Do you mean this function should be changed? Is the comment about 32bit DMA device still valid?
phys_size_t board_get_usable_ram_top(phys_size_t total_size) { /* * Ensure that we run from first 4GB so that all * addresses used by U-Boot are 32bit addresses. * * This in-turn ensures that 32bit DMA capable * devices work fine because DMA mapping APIs will * provide 32bit DMA addresses only. */ if (gd->ram_top >= SZ_4G) return SZ_4G - 1;
return gd->ram_top;}
The comment above says 32bit DMA is board specific and not architecture specific. So it is wrong to have this board_get_usable_ram_top() function on architecture level. It makes usage of devices with all memory above 4 GiB impossible.
It tried to pass through a SATA controller but received an error:
# modprobe vfio-pci # echo 0000:06:00.0 > /sys/bus/pci/drivers/ahci/unbind # echo 1022 7091 > /sys/bus/pci/drivers/vfio-pci/new_id # qemu-system-riscv64 -kernel u-boot.bin -nographic -M virt -m 4G -device vfio-pci,host=0000:06:00.0 qemu-system-riscv64: -device vfio-pci,host=0000:06:00.0: VFIO_MAP_DMA failed: Invalid argument qemu-system-riscv64: -device vfio-pci,host=0000:06:00.0: vfio 0000:06:00.0: failed to setup container for group 5: memory listener initialization failed: Region riscv_virt_board.ram: vfio_dma_map(0x55adbde66f70, 0x80000000, 0x100000000, 0x7fcd6fe00000) = -22 (Invalid argument)
With which version of QEMU were you able to use PCI pass through?
Best regards
Heinrich
board_get_usable_ram_top(), but that address is not backed by ram. This patch selects the lowest range instead.
Signed-off-by: Fei Wu fei2.wu@intel.com
arch/riscv/cpu/generic/dram.c | 2 +- configs/qemu-riscv64_defconfig | 2 +- configs/qemu-riscv64_smode_defconfig | 2 +- configs/qemu-riscv64_spl_defconfig | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/riscv/cpu/generic/dram.c b/arch/riscv/cpu/generic/dram.c index 44e11bd56c..fb53a57b4e 100644 --- a/arch/riscv/cpu/generic/dram.c +++ b/arch/riscv/cpu/generic/dram.c @@ -13,7 +13,7 @@ DECLARE_GLOBAL_DATA_PTR;
int dram_init(void) {
- return fdtdec_setup_mem_size_base();
- return fdtdec_setup_mem_size_base_lowest();
Linaro is working on allowing to download a distro image via https and installing from a RAM disk.
We should not artificially reduce the RAM size available for U-Boot by restricting ourselfs to 1 GiB.
We must ensure that ram top is in the upper range.
How do they handle the case of >4GB? board_get_usable_ram_top() attached above always returns <4GB. And it seems like fdtdec_setup_mem_size_base() cannot ensure the upper one is picked, it just picks up one, but which one is selected depending on fdt.
Thanks, Fei.
Best regards
Heinrich
}
int dram_init_banksize(void) diff --git a/configs/qemu-riscv64_defconfig b/configs/qemu-riscv64_defconfig index 9a8bbef192..aa55317d26 100644 --- a/configs/qemu-riscv64_defconfig +++ b/configs/qemu-riscv64_defconfig @@ -1,6 +1,6 @@ CONFIG_RISCV=y CONFIG_SYS_MALLOC_LEN=0x800000 -CONFIG_NR_DRAM_BANKS=1 +CONFIG_NR_DRAM_BANKS=2 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000 CONFIG_ENV_SIZE=0x20000 diff --git a/configs/qemu-riscv64_smode_defconfig b/configs/qemu-riscv64_smode_defconfig index 1d0f021ade..de08a49dab 100644 --- a/configs/qemu-riscv64_smode_defconfig +++ b/configs/qemu-riscv64_smode_defconfig @@ -1,6 +1,6 @@ CONFIG_RISCV=y CONFIG_SYS_MALLOC_LEN=0x800000 -CONFIG_NR_DRAM_BANKS=1 +CONFIG_NR_DRAM_BANKS=2 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000 CONFIG_ENV_SIZE=0x20000 diff --git a/configs/qemu-riscv64_spl_defconfig b/configs/qemu-riscv64_spl_defconfig index bb10145e6e..66dc2a1dd9 100644 --- a/configs/qemu-riscv64_spl_defconfig +++ b/configs/qemu-riscv64_spl_defconfig @@ -1,6 +1,6 @@ CONFIG_RISCV=y CONFIG_SYS_MALLOC_LEN=0x800000 -CONFIG_NR_DRAM_BANKS=1 +CONFIG_NR_DRAM_BANKS=2 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000 CONFIG_ENV_SIZE=0x20000