Hello Pratyush,
I upgraded u-boot on my k210 maix bit board, and the SPI flash is no longer detected.
I bisected the problem to commit: d15de623013c ("spi: spi-mem: allow specifying a command's extension")
Before the commit in question, the following was printed: Loading Environment from SPIFlash... SF: Detected gd25lq128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB *** Warning - bad CRC, using default environment
After the commit in question, the following is printed: Loading Environment from SPIFlash... jedec_spi_nor spi-flash@0: unrecognized JEDEC id bytes: 60, 18, c8 *** Warning - spi_flash_probe_bus_cs() failed, using default environment
Looking at spi-nor-ids.c, the flash is defined like this: INFO("gd25lq128", 0xc86018, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
So it appears that after your patch, the bytes are coming in the wrong order.
Any suggestions?
Kind regards, Niklas