Dear all,
Am 29.11.2010 14:23, schrieb Hiremath, Vaibhav:
The system is hanging at
fixrel: /* relative fix: increase location by offset */ ldr r1, [r0]
[Hiremath, Vaibhav] pasting error, the actual place is
fixnext: str r1, [r0]
Here the value of r0 is relocation offset and not an address.
I do have this error on at92rm9200ek too. I got it down to corrupted .rel.dyn table by setting two bss values in arch/arm/cpu/at91/timer.c.
Can you try to change your linker script to _not_ overlay _rel_dyn_start with with .bss?
The other way is to break on board_init_f, display the relevant (defective) locations in .rel.dyn and step through the for loop for init_sequence if one destroys the relevant part in .rel.dyn
regards
Andreas Bießmann