The phyCORE-i.MX 93 is available in various variants. Relevant variant options for the spl/u-boot are: - with or without HS400 support for the eMMC - with 1GB ram chip, or 2GB ram chip
The phyCORE's eeprom contains all information about the existing variant options. Add evaluation of the eeprom data to the spl/u-boot to enable/disable HS400 and to select the appropriate ram configuration at startup.
Signed-off-by: Christoph Stoidner c.stoidner@phytec.de Reviewed-by: Wadim Egorov w.egorov@phytec.de --- Cc: Mathieu Othacehe m.othacehe@gmail.com Cc: Christoph Stoidner c.stoidner@phytec.de Cc: Stefano Babic sbabic@denx.de Cc: Fabio Estevam festevam@gmail.com Cc: "NXP i.MX U-Boot Team" uboot-imx@nxp.com Cc: Tom Rini trini@konsulko.com Cc: Yannic Moog y.moog@phytec.de Cc: Primoz Fiser primoz.fiser@norik.com Cc: Andrej Picej andrej.picej@norik.com Cc: Wadim Egorov w.egorov@phytec.de --- Changes in v3: - remove unwanted dts node eepromid - correct typo in doc (PHYTEC_IMX93_VOLTAGE_3V3) - improve enum code-style (phytec_imx93_option_index)
Changes in v2: - encapsulate handling of feature flag VOLTAGE into own function - move definition of enum phytec_imx93_ddr_eeprom_code into header file
arch/arm/dts/imx93-phyboard-segin-u-boot.dtsi | 9 ++ arch/arm/mach-imx/imx9/Kconfig | 2 + arch/arm/mach-imx/imx9/soc.c | 2 +- board/phytec/common/Kconfig | 8 ++ board/phytec/common/Makefile | 1 + board/phytec/common/imx93_som_detection.c | 111 ++++++++++++++++++ board/phytec/common/imx93_som_detection.h | 51 ++++++++ board/phytec/phycore_imx93/Kconfig | 28 +++++ board/phytec/phycore_imx93/MAINTAINERS | 5 +- board/phytec/phycore_imx93/phycore-imx93.c | 51 ++++++++ board/phytec/phycore_imx93/spl.c | 48 ++++++++ 11 files changed, 314 insertions(+), 2 deletions(-) create mode 100644 board/phytec/common/imx93_som_detection.c create mode 100644 board/phytec/common/imx93_som_detection.h
diff --git a/arch/arm/dts/imx93-phyboard-segin-u-boot.dtsi b/arch/arm/dts/imx93-phyboard-segin-u-boot.dtsi index 6897c91f4d..e001ee3288 100644 --- a/arch/arm/dts/imx93-phyboard-segin-u-boot.dtsi +++ b/arch/arm/dts/imx93-phyboard-segin-u-boot.dtsi @@ -305,4 +305,13 @@ }; }; }; + + eeprom@50 { + bootph-pre-ram; + bootph-some-ram; + compatible = "atmel,24c32"; + reg = <0x50>; + pagesize = <32>; + vcc-supply = <&buck4>; + }; }; diff --git a/arch/arm/mach-imx/imx9/Kconfig b/arch/arm/mach-imx/imx9/Kconfig index 5c1054138f..2465e31d73 100644 --- a/arch/arm/mach-imx/imx9/Kconfig +++ b/arch/arm/mach-imx/imx9/Kconfig @@ -45,6 +45,8 @@ config TARGET_PHYCORE_IMX93 bool "phycore_imx93" select IMX93 select IMX9_LPDDR4X + select OF_BOARD_FIXUP + select OF_BOARD_SETUP
endchoice
diff --git a/arch/arm/mach-imx/imx9/soc.c b/arch/arm/mach-imx/imx9/soc.c index 21e0e7dd1e..6837ac82b0 100644 --- a/arch/arm/mach-imx/imx9/soc.c +++ b/arch/arm/mach-imx/imx9/soc.c @@ -634,7 +634,7 @@ static int low_drive_freq_update(void *blob) return 0; }
-#ifdef CONFIG_OF_BOARD_FIXUP +#if defined(CONFIG_OF_BOARD_FIXUP) && !defined(CONFIG_TARGET_PHYCORE_IMX93) #ifndef CONFIG_XPL_BUILD int board_fix_fdt(void *fdt) { diff --git a/board/phytec/common/Kconfig b/board/phytec/common/Kconfig index f394ace786..bc5511707a 100644 --- a/board/phytec/common/Kconfig +++ b/board/phytec/common/Kconfig @@ -19,6 +19,14 @@ config PHYTEC_IMX8M_SOM_DETECTION Support of I2C EEPROM based SoM detection. Supported for PHYTEC i.MX8MM/i.MX8MP boards
+config PHYTEC_IMX93_SOM_DETECTION + bool "Support SoM detection for i.MX93 PHYTEC platforms" + depends on ARCH_IMX9 && PHYTEC_SOM_DETECTION + default y + help + Support of I2C EEPROM based SoM detection. Supported + for PHYTEC i.MX93 based boards + config PHYTEC_AM62_SOM_DETECTION bool "Support SoM detection for AM62x PHYTEC platforms" depends on (TARGET_PHYCORE_AM62X_A53 || TARGET_PHYCORE_AM62X_R5) && \ diff --git a/board/phytec/common/Makefile b/board/phytec/common/Makefile index cd78f7686f..8126f7356e 100644 --- a/board/phytec/common/Makefile +++ b/board/phytec/common/Makefile @@ -10,3 +10,4 @@ endif obj-y += phytec_som_detection.o phytec_som_detection_blocks.o obj-$(CONFIG_ARCH_K3) += am6_som_detection.o k3/ obj-$(CONFIG_ARCH_IMX8M) += imx8m_som_detection.o +obj-$(CONFIG_ARCH_IMX9) += imx93_som_detection.o diff --git a/board/phytec/common/imx93_som_detection.c b/board/phytec/common/imx93_som_detection.c new file mode 100644 index 0000000000..eb9574d43b --- /dev/null +++ b/board/phytec/common/imx93_som_detection.c @@ -0,0 +1,111 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2024 PHYTEC Messtechnik GmbH + * Author: Primoz Fiser primoz.fiser@norik.com + */ + +#include <asm/arch/sys_proto.h> +#include <dm/device.h> +#include <dm/uclass.h> +#include <i2c.h> +#include <u-boot/crc.h> + +#include "imx93_som_detection.h" + +extern struct phytec_eeprom_data eeprom_data; + +#if IS_ENABLED(CONFIG_PHYTEC_IMX93_SOM_DETECTION) + +/* Check if the SoM is actually one of the following products: + * - i.MX93 + * + * Returns 0 in case it's a known SoM. Otherwise, returns 1. + */ +u8 __maybe_unused phytec_imx93_detect(struct phytec_eeprom_data *data) +{ + u8 som; + + if (!data) + data = &eeprom_data; + + /* Early API revisions are not supported */ + if (!data->valid || data->payload.api_rev < PHYTEC_API_REV2) + return 1; + + som = data->payload.data.data_api2.som_no; + debug("%s: som id: %u\n", __func__, som); + + if (som == PHYTEC_IMX93_SOM && is_imx93()) + return 0; + + pr_err("%s: SoM ID does not match. Wrong EEPROM data?\n", __func__); + return 1; +} + +/* + * Filter PHYTEC i.MX93 SoM options by option index + * + * Returns: + * - option value + * - PHYTEC_EEPROM_INVAL when the data is invalid + * + */ +u8 __maybe_unused phytec_imx93_get_opt(struct phytec_eeprom_data *data, + enum phytec_imx93_option_index idx) +{ + char *opt; + u8 opt_id; + + if (!data) + data = &eeprom_data; + + if (!data->valid || data->payload.api_rev < PHYTEC_API_REV2) + return PHYTEC_EEPROM_INVAL; + + opt = phytec_get_opt(data); + if (opt) + opt_id = PHYTEC_GET_OPTION(opt[idx]); + else + opt_id = PHYTEC_EEPROM_INVAL; + + debug("%s: opt[%d] id: %u\n", __func__, idx, opt_id); + return opt_id; +} + +/* + * Filter PHYTEC i.MX93 SoM voltage + * + * Returns: + * - PHYTEC_IMX93_VOLTAGE_1V8 or PHYTEC_IMX93_VOLTAGE_3V3 + * - PHYTEC_EEPROM_INVAL when the data is invalid + * + */ +enum phytec_imx93_voltage __maybe_unused phytec_imx93_get_voltage(struct phytec_eeprom_data *data) +{ + u8 option = phytec_imx93_get_opt(data, PHYTEC_IMX93_OPT_FEAT); + + if (option == PHYTEC_EEPROM_INVAL) + return PHYTEC_IMX93_VOLTAGE_INVALID; + return (option & 0x01) ? PHYTEC_IMX93_VOLTAGE_1V8 : PHYTEC_IMX93_VOLTAGE_3V3; +} + +#else + +inline u8 __maybe_unused phytec_imx93_detect(struct phytec_eeprom_data *data) +{ + return 1; +} + +inline u8 __maybe_unused phytec_imx93_get_opt(struct phytec_eeprom_data *data, + enum phytec_imx93_option_index idx) +{ + return PHYTEC_EEPROM_INVAL; +} + +inline enum phytec_imx93_voltage __maybe_unused phytec_imx93_get_voltage + (struct phytec_eeprom_data *data) +{ + return PHYTEC_EEPROM_INVAL; +} + +#endif /* IS_ENABLED(CONFIG_PHYTEC_IMX93_SOM_DETECTION) */ diff --git a/board/phytec/common/imx93_som_detection.h b/board/phytec/common/imx93_som_detection.h new file mode 100644 index 0000000000..a0803b47cb --- /dev/null +++ b/board/phytec/common/imx93_som_detection.h @@ -0,0 +1,51 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright (C) 2024 PHYTEC Messtechnik GmbH + * Author: Primoz Fiser primoz.fiser@norik.com + */ + +#ifndef _PHYTEC_IMX93_SOM_DETECTION_H +#define _PHYTEC_IMX93_SOM_DETECTION_H + +#include "phytec_som_detection.h" + +#define PHYTEC_IMX93_SOM 77 + +enum phytec_imx93_option_index { + PHYTEC_IMX93_OPT_DDR = 0, + PHYTEC_IMX93_OPT_EMMC = 1, + PHYTEC_IMX93_OPT_CPU = 2, + PHYTEC_IMX93_OPT_FREQ = 3, + PHYTEC_IMX93_OPT_NPU = 4, + PHYTEC_IMX93_OPT_DISP = 5, + PHYTEC_IMX93_OPT_ETH = 6, + PHYTEC_IMX93_OPT_FEAT = 7, + PHYTEC_IMX93_OPT_TEMP = 8, + PHYTEC_IMX93_OPT_BOOT = 9, + PHYTEC_IMX93_OPT_LED = 10, + PHYTEC_IMX93_OPT_EEPROM = 11, +}; + +enum phytec_imx93_voltage { + PHYTEC_IMX93_VOLTAGE_INVALID = PHYTEC_EEPROM_INVAL, + PHYTEC_IMX93_VOLTAGE_3V3 = 0, + PHYTEC_IMX93_VOLTAGE_1V8 = 1, +}; + +enum phytec_imx93_ddr_eeprom_code { + PHYTEC_IMX93_DDR_INVALID = PHYTEC_EEPROM_INVAL, + PHYTEC_IMX93_LPDDR4X_512MB = 0, + PHYTEC_IMX93_LPDDR4X_1GB = 1, + PHYTEC_IMX93_LPDDR4X_2GB = 2, + PHYTEC_IMX93_LPDDR4_512MB = 3, + PHYTEC_IMX93_LPDDR4_1GB = 4, + PHYTEC_IMX93_LPDDR4_2GB = 5, +}; + +u8 __maybe_unused phytec_imx93_detect(struct phytec_eeprom_data *data); +u8 __maybe_unused phytec_imx93_get_opt(struct phytec_eeprom_data *data, + enum phytec_imx93_option_index idx); +enum phytec_imx93_voltage __maybe_unused phytec_imx93_get_voltage + (struct phytec_eeprom_data *data); + +#endif /* _PHYTEC_IMX93_SOM_DETECTION_H */ diff --git a/board/phytec/phycore_imx93/Kconfig b/board/phytec/phycore_imx93/Kconfig index a70104cb79..09f26e89e3 100644 --- a/board/phytec/phycore_imx93/Kconfig +++ b/board/phytec/phycore_imx93/Kconfig @@ -10,4 +10,32 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "phycore_imx93"
+config PHYCORE_IMX93_RAM_TYPE_FIX + bool "Set phyCORE-i.MX93 RAM type and size fix instead of detecting" + default false + help + RAM type and size is being automatically detected with the help + of the PHYTEC EEPROM introspection data. + Set RAM type to a fix value instead. + +choice + prompt "phyCORE-i.MX93 RAM type" + depends on PHYCORE_IMX93_RAM_TYPE_FIX + default PHYCORE_IMX93_RAM_TYPE_LPDDR4X_1GB + +config PHYCORE_IMX93_RAM_TYPE_LPDDR4X_1GB + bool "LPDDR4X 1GB RAM" + help + Set RAM type fixed to LPDDR4X and RAM size fixed to 1GB + for phyCORE-i.MX93. + +config PHYCORE_IMX93_RAM_TYPE_LPDDR4X_2GB + bool "LPDDR4X 2GB RAM" + help + Set RAM type fixed to LPDDR4X and RAM size fixed to 2GB + for phyCORE-i.MX93. + +endchoice + +source "board/phytec/common/Kconfig" endif diff --git a/board/phytec/phycore_imx93/MAINTAINERS b/board/phytec/phycore_imx93/MAINTAINERS index 9e91a29dc3..cea817ffdc 100644 --- a/board/phytec/phycore_imx93/MAINTAINERS +++ b/board/phytec/phycore_imx93/MAINTAINERS @@ -1,10 +1,13 @@ phyCORE-i.MX93 -M: Mathieu Othacehe m.othacehe@gmail.com +M: Mathieu Othacehe m.othacehe@gmail.com +R: Christoph Stoidner c.stoidner@phytec.de W: https://www.phytec.eu/en/produkte/system-on-modules/phycore-imx-91-93/ S: Maintained F: arch/arm/dts/imx93-phyboard-segin.dts F: arch/arm/dts/imx93-phycore-som.dtsi F: arch/arm/dts/imx93-phyboard-segin-u-boot.dtsi F: board/phytec/phycore_imx93/ +F: board/phytec/common/imx93_som_detection.c +F: board/phytec/common/imx93_som_detection.h F: configs/imx93-phyboard-segin_defconfig F: include/configs/phycore_imx93.h diff --git a/board/phytec/phycore_imx93/phycore-imx93.c b/board/phytec/phycore_imx93/phycore-imx93.c index 085c8e195a..a55795e060 100644 --- a/board/phytec/phycore_imx93/phycore-imx93.c +++ b/board/phytec/phycore_imx93/phycore-imx93.c @@ -3,6 +3,7 @@ * Copyright (C) 2023 PHYTEC Messtechnik GmbH * Author: Christoph Stoidner c.stoidner@phytec.de * Copyright (C) 2024 Mathieu Othacehe m.othacehe@gmail.com + * Copyright (C) 2024 PHYTEC Messtechnik GmbH */
#include <asm/arch-imx9/ccm_regs.h> @@ -12,11 +13,21 @@ #include <asm/global_data.h> #include <asm/mach-imx/boot_mode.h> #include <env.h> +#include <fdt_support.h> + +#include "../common/imx93_som_detection.h"
DECLARE_GLOBAL_DATA_PTR;
+#define EEPROM_ADDR 0x50 + int board_init(void) { + int ret = phytec_eeprom_data_setup(NULL, 2, EEPROM_ADDR); + + if (ret) + printf("%s: EEPROM data init failed\n", __func__); + return 0; }
@@ -40,3 +51,43 @@ int board_late_init(void)
return 0; } + +static void emmc_fixup(void *blob, struct phytec_eeprom_data *data) +{ + enum phytec_imx93_voltage voltage = phytec_imx93_get_voltage(data); + int offset; + + if (voltage == PHYTEC_IMX93_VOLTAGE_INVALID) + goto err; + + if (voltage == PHYTEC_IMX93_VOLTAGE_1V8) { + offset = fdt_node_offset_by_compat_reg(blob, "fsl,imx93-usdhc", + 0x42850000); + if (offset) + fdt_delprop(blob, offset, "no-1-8-v"); + else + goto err; + } + + return; +err: + printf("Could not detect eMMC VDD-IO. Fall back to default.\n"); +} + +int board_fix_fdt(void *blob) +{ + struct phytec_eeprom_data data; + + phytec_eeprom_data_setup(&data, 2, EEPROM_ADDR); + + emmc_fixup(blob, &data); + + return 0; +} + +int ft_board_setup(void *blob, struct bd_info *bd) +{ + emmc_fixup(blob, NULL); + + return 0; +} diff --git a/board/phytec/phycore_imx93/spl.c b/board/phytec/phycore_imx93/spl.c index 17a8736c73..a4d2aaac32 100644 --- a/board/phytec/phycore_imx93/spl.c +++ b/board/phytec/phycore_imx93/spl.c @@ -3,6 +3,7 @@ * Copyright (C) 2023 PHYTEC Messtechnik GmbH * Author: Christoph Stoidner c.stoidner@phytec.de * Copyright (C) 2024 Mathieu Othacehe m.othacehe@gmail.com + * Copyright (C) 2024 PHYTEC Messtechnik GmbH */
#include <asm/arch/clock.h> @@ -20,6 +21,8 @@ #include <power/pca9450.h> #include <spl.h>
+#include "../common/imx93_som_detection.h" + DECLARE_GLOBAL_DATA_PTR;
/* @@ -27,6 +30,13 @@ DECLARE_GLOBAL_DATA_PTR; * when pca9451a support is added. */ #define PCA9450_REG_PWRCTRL_TOFF_DEB BIT(5) +#define EEPROM_ADDR 0x50 + +/* + * Prototypes of automatically generated ram config file + */ +void set_dram_timings_2gb_lpddr4x(void); +void set_dram_timings_1gb_lpddr4x_900mhz(void);
int spl_board_boot_device(enum boot_device boot_dev_spl) { @@ -46,6 +56,44 @@ void spl_board_init(void)
void spl_dram_init(void) { + int ret; + enum phytec_imx93_ddr_eeprom_code ddr_opt = PHYTEC_IMX93_DDR_INVALID; + + /* NOTE: In SPL lpi2c3 is mapped to bus 0 */ + ret = phytec_eeprom_data_setup(NULL, 0, EEPROM_ADDR); + if (ret && !IS_ENABLED(CONFIG_PHYCORE_IMX93_RAM_TYPE_FIX)) + goto out; + + ret = phytec_imx93_detect(NULL); + if (!ret) + phytec_print_som_info(NULL); + + if (IS_ENABLED(CONFIG_PHYCORE_IMX93_RAM_TYPE_FIX)) { + if (IS_ENABLED(CONFIG_PHYCORE_IMX93_RAM_TYPE_LPDDR4X_1GB)) + ddr_opt = PHYTEC_IMX93_LPDDR4X_1GB; + else if (IS_ENABLED(CONFIG_PHYCORE_IMX93_RAM_TYPE_LPDDR4X_2GB)) + ddr_opt = PHYTEC_IMX93_LPDDR4X_2GB; + } else { + ddr_opt = phytec_imx93_get_opt(NULL, PHYTEC_IMX93_OPT_DDR); + } + + switch (ddr_opt) { + case PHYTEC_IMX93_LPDDR4X_1GB: + if (is_voltage_mode(VOLT_LOW_DRIVE)) + set_dram_timings_1gb_lpddr4x_900mhz(); + break; + case PHYTEC_IMX93_LPDDR4X_2GB: + set_dram_timings_2gb_lpddr4x(); + break; + default: + goto out; + } + ddr_init(&dram_timing); + return; +out: + puts("Could not detect correct RAM type and size. Fall back to default.\n"); + if (is_voltage_mode(VOLT_LOW_DRIVE)) + set_dram_timings_1gb_lpddr4x_900mhz(); ddr_init(&dram_timing); }