Enable validation of boot.scr script prior to its execution dependent on "secureboot" flag in environment. Disable fall back option to qspi boot in case of secure boot. Also enable "secureboot=y" flag in environment for ARM based platforms instead of bootcmd.
Signed-off-by: Sumit Garg sumit.garg@nxp.com Tested-by: Vinitha Pillai vinitha.pillai@nxp.com --- configs/ls1046ardb_qspi_SECURE_BOOT_defconfig | 1 + configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig | 1 + include/configs/ls1046a_common.h | 18 ++++++++++++++++++ include/configs/ls1046ardb.h | 3 ++- 4 files changed, 22 insertions(+), 1 deletion(-)
diff --git a/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig b/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig index 07bf17e..b7d8aa7 100644 --- a/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig +++ b/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig @@ -36,3 +36,4 @@ CONFIG_FSL_QSPI=y CONFIG_USB=y CONFIG_DM_USB=y CONFIG_RSA=y +CONFIG_DISTRO_DEFAULTS=y diff --git a/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig b/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig index c676266..0dd69c5 100644 --- a/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig +++ b/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig @@ -45,3 +45,4 @@ CONFIG_RSA=y CONFIG_SPL_RSA=y CONFIG_SPL_CRYPTO_SUPPORT=y CONFIG_SPL_HASH_SUPPORT=y +CONFIG_DISTRO_DEFAULTS=y diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h index 1820f34..053b759 100644 --- a/include/configs/ls1046a_common.h +++ b/include/configs/ls1046a_common.h @@ -223,9 +223,11 @@ "fdt_addr=0x64f00000\0" \ "kernel_addr=0x65000000\0" \ "scriptaddr=0x80000000\0" \ + "scripthdraddr=0x80080000\0" \ "fdtheader_addr_r=0x80100000\0" \ "kernelheader_addr_r=0x80200000\0" \ "load_addr=0xa0000000\0" \ + "kernel_addr_r=0x81000000\0" \ "fdt_addr_r=0x90000000\0" \ "ramdisk_addr_r=0xa0000000\0" \ "kernel_start=0x1000000\0" \ @@ -235,6 +237,7 @@ MTDPARTS_DEFAULT "\0" \ BOOTENV \ "boot_scripts=ls1046ardb_boot.scr\0" \ + "boot_script_hdr=hdr_ls1046ardb_bs.out\0" \ "scan_dev_for_boot_part=" \ "part list ${devtype} ${devnum} devplist; " \ "env exists devplist || setenv devplist 1; " \ @@ -245,6 +248,21 @@ "run scan_dev_for_boot; " \ "fi; " \ "done\0" \ + "scan_dev_for_boot=" \ + "echo Scanning ${devtype} " \ + "${devnum}:${distro_bootpart}...; " \ + "for prefix in ${boot_prefixes}; do " \ + "run scan_dev_for_scripts; " \ + "done;" \ + "\0" \ + "boot_a_script=" \ + "load ${devtype} ${devnum}:${distro_bootpart} " \ + "${scriptaddr} ${prefix}${script}; " \ + "env exists secureboot && load ${devtype} " \ + "${devnum}:${distro_bootpart} " \ + "${scripthdraddr} ${prefix}${boot_script_hdr} " \ + "&& esbc_validate ${scripthdraddr};" \ + "source ${scriptaddr}\0" \ "installer=load mmc 0:2 $load_addr " \ "/flex_installer_arm64.itb; " \ "bootm $load_addr#ls1046ardb\0" \ diff --git a/include/configs/ls1046ardb.h b/include/configs/ls1046ardb.h index d906be7..88bfff3 100644 --- a/include/configs/ls1046ardb.h +++ b/include/configs/ls1046ardb.h @@ -241,7 +241,8 @@
#ifndef SPL_NO_MISC #undef CONFIG_BOOTCOMMAND -#define CONFIG_BOOTCOMMAND "run distro_bootcmd;run qspi_bootcmd" +#define CONFIG_BOOTCOMMAND "run distro_bootcmd; env exists secureboot" \ + "&& esbc_halt; run qspi_bootcmd;" #define MTDPARTS_DEFAULT "mtdparts=1550000.quadspi:1m(rcw)," \ "15m(u-boot),48m(kernel.itb);" \ "7e800000.flash:16m(nand_uboot)," \