Nowadays generic CFI code properly detects the ED Mini V2's Macronix MC29LV400CB flash chip, therefore we can drop the CONFIG_FLASH_CFI_LEGACY option and associated settings and code.
Signed-off-by: Albert ARIBAUD albert.u.boot@aribaud.net --- board/LaCie/edminiv2/edminiv2.c | 50 ----------------------------------------- include/configs/edminiv2.h | 4 ---- 2 files changed, 54 deletions(-)
diff --git a/board/LaCie/edminiv2/edminiv2.c b/board/LaCie/edminiv2/edminiv2.c index 80ec7fa..690038e 100644 --- a/board/LaCie/edminiv2/edminiv2.c +++ b/board/LaCie/edminiv2/edminiv2.c @@ -15,56 +15,6 @@
DECLARE_GLOBAL_DATA_PTR;
-/* - * The ED Mini V2 is equipped with a Macronix MXLV400CB FLASH - * which CFI does not properly detect, hence the LEGACY config. - */ -#if defined(CONFIG_FLASH_CFI_LEGACY) -#include <flash.h> -ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info) -{ - int sectsz[] = CONFIG_SYS_FLASH_SECTSZ; - int sect; - - if (base != CONFIG_SYS_FLASH_BASE) - return 0; - - info->size = 0; - info->sector_count = CONFIG_SYS_MAX_FLASH_SECT; - /* set each sector's start address and size based */ - for (sect = 0; sect < CONFIG_SYS_MAX_FLASH_SECT; sect++) { - info->start[sect] = base+info->size; - info->size += sectsz[sect]; - } - /* This flash must be accessed in 8-bits mode, no buffer. */ - info->flash_id = 0x01000000; - info->portwidth = FLASH_CFI_8BIT; - info->chipwidth = FLASH_CFI_BY8; - info->buffer_size = 0; - /* timings are derived from the Macronix datasheet. */ - info->erase_blk_tout = 1000; - info->write_tout = 10; - info->buffer_write_tout = 300; - /* Commands and addresses are for AMD mode 8-bit access. */ - info->vendor = CFI_CMDSET_AMD_LEGACY; - info->cmd_reset = 0xF0; - info->interface = FLASH_CFI_X8; - info->legacy_unlock = 0; - info->ext_addr = 0; - info->addr_unlock1 = 0x00000aaa; - info->addr_unlock2 = 0x00000555; - /* Manufacturer Macronix, device MX29LV400CB, CFI 1.3. */ - info->manufacturer_id = 0x22; - info->device_id = 0xBA; - info->device_id2 = 0; - info->cfi_version = 0x3133; - info->cfi_offset = 0x0000; - info->name = "MX29LV400CB"; - - return 1; -} -#endif /* CONFIG_SYS_FLASH_CFI */ - int board_init(void) { /* arch number of board */ diff --git a/include/configs/edminiv2.h b/include/configs/edminiv2.h index 70a698a..f1e8cb0 100644 --- a/include/configs/edminiv2.h +++ b/include/configs/edminiv2.h @@ -89,13 +89,9 @@
#define CONFIG_SYS_FLASH_CFI #define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_FLASH_CFI_LEGACY #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */ #define CONFIG_SYS_MAX_FLASH_SECT 11 /* max num of sects on one chip */ #define CONFIG_SYS_FLASH_BASE 0xfff80000 -#define CONFIG_SYS_FLASH_SECTSZ \ - {16384, 8192, 8192, 32768, \ - 65536, 65536, 65536, 65536, 65536, 65536, 65536}
/* auto boot */ #define CONFIG_BOOTDELAY 3 /* default enable autoboot */