Do the regulator related work only if the build has the DM_REGULATOR.
Signed-off-by: Abel Vesa abel.vesa@nxp.com --- drivers/usb/host/ehci-mx6.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/host/ehci-mx6.c b/drivers/usb/host/ehci-mx6.c index 1acf08d..9483947 100644 --- a/drivers/usb/host/ehci-mx6.c +++ b/drivers/usb/host/ehci-mx6.c @@ -404,6 +404,7 @@ static int mx6_init_after_reset(struct ehci_ctrl *dev) if (ret) return ret;
+#if CONFIG_IS_ENABLED(DM_REGULATOR) if (priv->vbus_supply) { ret = regulator_set_enable(priv->vbus_supply, (type == USB_INIT_DEVICE) ? @@ -413,6 +414,7 @@ static int mx6_init_after_reset(struct ehci_ctrl *dev) return ret; } } +#endif
if (type == USB_INIT_DEVICE) return 0; @@ -514,15 +516,17 @@ static int ehci_usb_probe(struct udevice *dev) priv->portnr = dev->seq; priv->init_type = type;
+#if CONFIG_IS_ENABLED(DM_REGULATOR) ret = device_get_supply_regulator(dev, "vbus-supply", &priv->vbus_supply); if (ret) debug("%s: No vbus supply\n", dev->name); - +#endif ret = ehci_mx6_common_init(ehci, priv->portnr); if (ret) return ret;
+#if CONFIG_IS_ENABLED(DM_REGULATOR) if (priv->vbus_supply) { ret = regulator_set_enable(priv->vbus_supply, (type == USB_INIT_DEVICE) ? @@ -532,6 +536,7 @@ static int ehci_usb_probe(struct udevice *dev) return ret; } } +#endif
if (priv->init_type == USB_INIT_HOST) { setbits_le32(&ehci->usbmode, CM_HOST);