Pull in the recent changes to the RZ/G2L device tree and related dtsi files so that we're aligned with Linux v6.6 (commit ffc253263a13).
Signed-off-by: Paul Barker paul.barker.ct@bp.renesas.com --- arch/arm/dts/r9a07g044.dtsi | 16 ++++++++-------- arch/arm/dts/r9a07g044l2-smarc.dts | 21 +++++++++++++++++++++ arch/arm/dts/rz-smarc-common.dtsi | 4 ++-- arch/arm/dts/rzg2l-smarc-pinfunction.dtsi | 20 ++++++++++++++++++++ arch/arm/dts/rzg2l-smarc-som.dtsi | 22 ++++++++++++++++++++-- arch/arm/dts/rzg2l-smarc.dtsi | 23 ++++++++++++++++++++--- 6 files changed, 91 insertions(+), 15 deletions(-)
diff --git a/arch/arm/dts/r9a07g044.dtsi b/arch/arm/dts/r9a07g044.dtsi index 232910e07444..66f68fc2b241 100644 --- a/arch/arm/dts/r9a07g044.dtsi +++ b/arch/arm/dts/r9a07g044.dtsi @@ -223,20 +223,20 @@ <GIC_SPI 212 IRQ_TYPE_EDGE_RISING>, <GIC_SPI 213 IRQ_TYPE_EDGE_RISING>; interrupt-names = "tgia0", "tgib0", "tgic0", "tgid0", - "tgiv0", "tgie0", "tgif0", - "tgia1", "tgib1", "tgiv1", "tgiu1", - "tgia2", "tgib2", "tgiv2", "tgiu2", + "tciv0", "tgie0", "tgif0", + "tgia1", "tgib1", "tciv1", "tciu1", + "tgia2", "tgib2", "tciv2", "tciu2", "tgia3", "tgib3", "tgic3", "tgid3", - "tgiv3", + "tciv3", "tgia4", "tgib4", "tgic4", "tgid4", - "tgiv4", + "tciv4", "tgiu5", "tgiv5", "tgiw5", "tgia6", "tgib6", "tgic6", "tgid6", - "tgiv6", + "tciv6", "tgia7", "tgib7", "tgic7", "tgid7", - "tgiv7", + "tciv7", "tgia8", "tgib8", "tgic8", "tgid8", - "tgiv8", "tgiu8"; + "tciv8", "tciu8"; clocks = <&cpg CPG_MOD R9A07G044_MTU_X_MCK_MTU3>; power-domains = <&cpg>; resets = <&cpg R9A07G044_MTU_X_PRESET_MTU3>; diff --git a/arch/arm/dts/r9a07g044l2-smarc.dts b/arch/arm/dts/r9a07g044l2-smarc.dts index bc2af6c92ccd..568d49cfe44a 100644 --- a/arch/arm/dts/r9a07g044l2-smarc.dts +++ b/arch/arm/dts/r9a07g044l2-smarc.dts @@ -6,6 +6,27 @@ */
/dts-v1/; + +/* Enable SCIF2 (SER0) on PMOD1 (CN7) */ +#define PMOD1_SER0 1 + +/* + * To enable MTU3a PWM on PMOD0, + * Disable PMOD1_SER0 by setting "#define PMOD1_SER0 0" above and + * enable PMOD_MTU3 by setting "#define PMOD_MTU3 1" below. + */ +#define PMOD_MTU3 0 + +#if (PMOD_MTU3 && PMOD1_SER0) +#error "Cannot set as PMOD_MTU3 and PMOD1_SER0 are mutually exclusive " +#endif + +#define MTU3_COUNTER_Z_PHASE_SIGNAL 0 + +#if (!PMOD_MTU3 && MTU3_COUNTER_Z_PHASE_SIGNAL) +#error "Cannot set 1 to MTU3_COUNTER_Z_PHASE_SIGNAL as PMOD_MTU3=0" +#endif + #include "r9a07g044l2.dtsi" #include "rzg2l-smarc-som.dtsi" #include "rzg2l-smarc-pinfunction.dtsi" diff --git a/arch/arm/dts/rz-smarc-common.dtsi b/arch/arm/dts/rz-smarc-common.dtsi index 3962d47b3e59..a7594ba3a998 100644 --- a/arch/arm/dts/rz-smarc-common.dtsi +++ b/arch/arm/dts/rz-smarc-common.dtsi @@ -78,11 +78,11 @@ }; };
-&audio_clk1{ +&audio_clk1 { clock-frequency = <11289600>; };
-&audio_clk2{ +&audio_clk2 { clock-frequency = <12288000>; };
diff --git a/arch/arm/dts/rzg2l-smarc-pinfunction.dtsi b/arch/arm/dts/rzg2l-smarc-pinfunction.dtsi index 9085d8c76ce1..18c526c7a4cf 100644 --- a/arch/arm/dts/rzg2l-smarc-pinfunction.dtsi +++ b/arch/arm/dts/rzg2l-smarc-pinfunction.dtsi @@ -53,6 +53,26 @@ <RZG2L_PORT_PINMUX(18, 1, 3)>; /* SCL */ };
+ mtu3_pins: mtu3 { + mtu3-ext-clk-input-pin { + pinmux = <RZG2L_PORT_PINMUX(48, 0, 4)>, /* MTCLKA */ + <RZG2L_PORT_PINMUX(48, 1, 4)>; /* MTCLKB */ + }; + + mtu3-pwm { + pinmux = <RZG2L_PORT_PINMUX(44, 0, 4)>, /* MTIOC3A */ + <RZG2L_PORT_PINMUX(44, 1, 4)>, /* MTIOC3B */ + <RZG2L_PORT_PINMUX(44, 2, 4)>, /* MTIOC3C */ + <RZG2L_PORT_PINMUX(44, 3, 4)>; /* MTIOC3D */ + }; + +#if MTU3_COUNTER_Z_PHASE_SIGNAL + mtu3-zphase-clk { + pinmux = <RZG2L_PORT_PINMUX(19, 0, 3)>; /* MTIOC1A */ + }; +#endif /* MTU3_COUNTER_Z_PHASE_SIGNAL */ + }; + scif0_pins: scif0 { pinmux = <RZG2L_PORT_PINMUX(38, 0, 1)>, /* TxD */ <RZG2L_PORT_PINMUX(38, 1, 1)>; /* RxD */ diff --git a/arch/arm/dts/rzg2l-smarc-som.dtsi b/arch/arm/dts/rzg2l-smarc-som.dtsi index fbbb4f03440b..547859c388ce 100644 --- a/arch/arm/dts/rzg2l-smarc-som.dtsi +++ b/arch/arm/dts/rzg2l-smarc-som.dtsi @@ -73,6 +73,13 @@ gpios = <&pinctrl RZG2L_GPIO(39, 0) GPIO_ACTIVE_HIGH>; regulator-always-on; }; + + /* 32.768kHz crystal */ + x2: x2-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; };
&adc { @@ -100,7 +107,7 @@ rxc-skew-psec = <2400>; txc-skew-psec = <2400>; rxdv-skew-psec = <0>; - txdv-skew-psec = <0>; + txen-skew-psec = <0>; rxd0-skew-psec = <0>; rxd1-skew-psec = <0>; rxd2-skew-psec = <0>; @@ -128,7 +135,7 @@ rxc-skew-psec = <2400>; txc-skew-psec = <2400>; rxdv-skew-psec = <0>; - txdv-skew-psec = <0>; + txen-skew-psec = <0>; rxd0-skew-psec = <0>; rxd1-skew-psec = <0>; rxd2-skew-psec = <0>; @@ -148,6 +155,17 @@ mali-supply = <®_1p1v>; };
+&i2c3 { + raa215300: pmic@12 { + compatible = "renesas,raa215300"; + reg = <0x12>, <0x6f>; + reg-names = "main", "rtc"; + + clocks = <&x2>; + clock-names = "xin"; + }; +}; + &ostm1 { status = "okay"; }; diff --git a/arch/arm/dts/rzg2l-smarc.dtsi b/arch/arm/dts/rzg2l-smarc.dtsi index 2a158a954b2f..68eab8e26bf2 100644 --- a/arch/arm/dts/rzg2l-smarc.dtsi +++ b/arch/arm/dts/rzg2l-smarc.dtsi @@ -8,9 +8,6 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
-/* comment the #define statement to disable SCIF2 (SER0) on PMOD1 (CN7) */ -#define PMOD1_SER0 1 - / { aliases { serial1 = &scif2; @@ -115,6 +112,26 @@ }; };
+#if PMOD_MTU3 +&mtu3 { + pinctrl-0 = <&mtu3_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +#if MTU3_COUNTER_Z_PHASE_SIGNAL +/* SDHI cd pin is muxed with counter Z phase signal */ +&sdhi1 { + status = "disabled"; +}; +#endif /* MTU3_COUNTER_Z_PHASE_SIGNAL */ + +&spi1 { + status = "disabled"; +}; +#endif /* PMOD_MTU3 */ + /* * To enable SCIF2 (SER0) on PMOD1 (CN7) * SW1 should be at position 2->3 so that SER0_CTS# line is activated