Trying to migrate to the latest U-Boot version (my old version was u-boot-2016.09.y), mmc_spi command fails with "unable to select a mode". I hunted this down to a rewrite in mmc.c regarding MMC/SD mode handling (d0c221fe7336fc7d9ada57d96f4a8911a3aac041). Current mmc.c tries to perform SD commands (like sd_set_card_speed or sd_select_bus_width) that produce a "illegal command" response from different of my SD-Cards when used in SPI-Mode. Attached patch just skips these illegal command sequences, when mmc_host uses SPI-mode. The patch is a straightforward solution, maybe SPI-mode needs to be added in "enum bus_mode" (see mmc.h) and handled properly in mmc.c.
Signed-off-by: Marcel Eckert eckert@hsu-hh.de --- drivers/mmc/mmc.c | 9 +++++++++ 1 file changed, 9 insertions(+)
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index 585951cd78..d78b58ac77 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -1286,6 +1286,9 @@ static int sd_set_card_speed(struct mmc *mmc, enum bus_mode mode) { int err;
+ if (mmc_host_is_spi(mmc)) + return 0; + ALLOC_CACHE_ALIGN_BUFFER(uint, switch_status, 16); int speed;
@@ -1332,6 +1335,9 @@ static int sd_select_bus_width(struct mmc *mmc, int w) int err; struct mmc_cmd cmd;
+ if (mmc_host_is_spi(mmc)) + return 0; + if ((w != 4) && (w != 1)) return -EINVAL;
@@ -1375,6 +1381,9 @@ static int sd_read_ssr(struct mmc *mmc) int timeout = 3; unsigned int au, eo, et, es;
+ if (mmc_host_is_spi(mmc)) + return 0; + cmd.cmdidx = MMC_CMD_APP_CMD; cmd.resp_type = MMC_RSP_R1; cmd.cmdarg = mmc->rca << 16;