On Friday 30 September 2016 05:12 AM, Simon Glass wrote:
Hi Keethy,
On 29 September 2016 at 00:11, Keerthy a0393675@ti.com wrote:
On Thursday 29 September 2016 11:32 AM, Keerthy wrote:
On Wednesday 28 September 2016 11:21 PM, Simon Glass wrote:
Hi Keerthy,
On 27 September 2016 at 22:27, Keerthy j-keerthy@ti.com wrote:
Add support to bind the regulators/child nodes with the pmic. Also adds the pmic i2c based read/write funtions to access pmic registers.
Signed-off-by: Keerthy j-keerthy@ti.com Reviewed-by: Simon Glass sjg@chromium.org Reviewed-by: Tom Rini trini@konsulko.com
Changes in v5:
- Added pmic read/write functions.
drivers/power/pmic/Kconfig | 7 +++ drivers/power/pmic/Makefile | 1 + drivers/power/pmic/palmas.c | 108 ++++++++++++++++++++++++++++++++++++++++++++ include/power/palmas.h | 25 ++++++++++ 4 files changed, 141 insertions(+) create mode 100644 drivers/power/pmic/palmas.c create mode 100644 include/power/palmas.h
diff --git a/drivers/power/pmic/Kconfig b/drivers/power/pmic/Kconfig index 69f8d51..92931c5 100644 --- a/drivers/power/pmic/Kconfig +++ b/drivers/power/pmic/Kconfig @@ -135,3 +135,10 @@ config PMIC_TPS65090 FETs and a battery charger. This driver provides register access only, and you can enable the regulator/charger drivers separately if required.
+config PMIC_PALMAS
bool "Enable driver for Texas Instruments PALMAS PMIC"depends on DM_PMIC---help---The PALMAS is a PMIC containing several LDOs, SMPS.This driver binds the pmic children.diff --git a/drivers/power/pmic/Makefile b/drivers/power/pmic/Makefile index 52b4f71..828c0cf 100644 --- a/drivers/power/pmic/Makefile +++ b/drivers/power/pmic/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_PMIC_PM8916) += pm8916.o obj-$(CONFIG_PMIC_RK808) += rk808.o obj-$(CONFIG_PMIC_TPS65090) += tps65090.o obj-$(CONFIG_PMIC_S5M8767) += s5m8767.o +obj-$(CONFIG_$(SPL_)PMIC_PALMAS) += palmas.o
obj-$(CONFIG_POWER_LTC3676) += pmic_ltc3676.o obj-$(CONFIG_POWER_MAX77696) += pmic_max77696.o diff --git a/drivers/power/pmic/palmas.c b/drivers/power/pmic/palmas.c new file mode 100644 index 0000000..1d2bd67 --- /dev/null +++ b/drivers/power/pmic/palmas.c @@ -0,0 +1,108 @@ +/*
- (C) Copyright 2016 Texas Instruments Incorporated, <www.ti.com>
- Keerthy j-keerthy@ti.com
- SPDX-License-Identifier: GPL-2.0+
- */
+#include <common.h> +#include <fdtdec.h> +#include <errno.h> +#include <dm.h> +#include <i2c.h> +#include <power/pmic.h> +#include <power/regulator.h> +#include <power/palmas.h> +#include <dm/device.h>
+DECLARE_GLOBAL_DATA_PTR;
+static const struct pmic_child_info pmic_children_info[] = {
{ .prefix = "ldo", .driver = PALMAS_LDO_DRIVER },{ .prefix = "smps", .driver = PALMAS_SMPS_DRIVER },{ },+};
+static int palmas_write(struct udevice *dev, uint reg, const uint8_t *buff,
int len)+{
if (dm_i2c_reg_write(dev, reg, *buff)) {I think this should be dm_i2c_write(). You are only writing a single byte.
Now the v2 of this series had comments suggesting the opposite:
https://www.mail-archive.com/u-boot@lists.denx.de/msg225123.html
And i thought dm_i2c_reg_write/read was specifically introduced for writing and reading one byte value?
int dm_i2c_reg_write(struct udevice *dev, uint offset, uint value) { uint8_t val = value;
return dm_i2c_write(dev, offset, &val, 1);}
Yes, but your palmas_write() function should be able to write multiple bytes. If you look at the function signature and the comments in pmic.h you should be able to see that.
Okay.
[...]
Regards, Simon