Re: [PATCH v3 3/7] arm: dts: ls1028a: declare the fixed-link speeds for the internal ENETC ports

On Tue, Jun 29, 2021 at 8:55 PM Vladimir Oltean vladimir.oltean@nxp.com wrote:

To comply with the device tree bindings expectations for an Ethernet controller, as well as to simplify the driver code, declare fixed-link nodes for the internal ENETC ports (attached to the mscc_felix switch).

Signed-off-by: Vladimir Oltean vladimir.oltean@nxp.com

v2->v3: none v1->v2: none

arch/arm/dts/fsl-ls1028a.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+)

diff --git a/arch/arm/dts/fsl-ls1028a.dtsi b/arch/arm/dts/fsl-ls1028a.dtsi index c7c725a4fc84..21f4ef78a059 100644 --- a/arch/arm/dts/fsl-ls1028a.dtsi +++ b/arch/arm/dts/fsl-ls1028a.dtsi @@ -144,12 +144,22 @@ reg = <0x000200 0 0 0 0>; status = "okay"; phy-mode = "internal";

•                   fixed-link {
  

•                           speed = <2500>;
  

•                           full-duplex;
  

•                   };
            };
            mdio0: pci@0,3 {
                    #address-cells=<0>;
                    #size-cells=<1>;
                    reg = <0x000300 0 0 0 0>;
                    status = "disabled";
  

•                   fixed-link {
  

•                           speed = <1000>;
  

•                           full-duplex;
  

•                   };
            };
  
            mscc_felix: pci@0,5 {
  

-- 2.25.1

Applied to u-boot-net/master, Thanks ! Ramon