The ARMv8 capable Allwinner A64 SoC comes out of reset in AArch32 mode. To run AArch64 code, we have to trigger a warm reset via the RMR register, which proceeds with code execution at the address stored in the RVBAR register. If the bootable payload in the FIT image is using a different architecture than the SPL has been compiled for, enter it via this said RMR switch mechanism, by writing the entry point address into the MMIO mapped, writable version of the RVBAR register. Then the warm reset is triggered via a system register write. If the payload architecture is the same as the SPL, we use the normal branch as usual.
Signed-off-by: Andre Przywara andre.przywara@arm.com --- arch/arm/lib/spl.c | 14 +++++++++ arch/arm/mach-sunxi/Makefile | 3 ++ arch/arm/mach-sunxi/spl_switch.c | 64 ++++++++++++++++++++++++++++++++++++++++ 3 files changed, 81 insertions(+) create mode 100644 arch/arm/mach-sunxi/spl_switch.c
diff --git a/arch/arm/lib/spl.c b/arch/arm/lib/spl.c index 33cc76ba3d..4d9370d232 100644 --- a/arch/arm/lib/spl.c +++ b/arch/arm/lib/spl.c @@ -73,3 +73,17 @@ void __noreturn jump_to_image_linux(struct spl_image_info *spl_image) } #endif /* CONFIG_ARM64 */ #endif + +u8 spl_genimg_get_arch_id(const char *arch_str) +{ + if (!arch_str) + return IH_ARCH_DEFAULT; + + if (!strcmp(arch_str, "arm")) + return IH_ARCH_ARM; + + if (!strcmp(arch_str, "arm64")) + return IH_ARCH_ARM64; + + return IH_ARCH_DEFAULT; +} diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-sunxi/Makefile index 43a93e3085..5a5e10a024 100644 --- a/arch/arm/mach-sunxi/Makefile +++ b/arch/arm/mach-sunxi/Makefile @@ -39,4 +39,7 @@ obj-$(CONFIG_SPL_SPI_SUNXI) += spl_spi_sunxi.o obj-$(CONFIG_SUNXI_DRAM_DW) += dram_sunxi_dw.o obj-$(CONFIG_SUNXI_DRAM_DW) += dram_timings/ obj-$(CONFIG_DRAM_SUN50I_H6) += dram_sun50i_h6.o +obj-$(CONFIG_MACH_SUN50I) += spl_switch.o +obj-$(CONFIG_MACH_SUN50I_H5) += spl_switch.o +obj-$(CONFIG_MACH_SUN50I_H6) += spl_switch.o endif diff --git a/arch/arm/mach-sunxi/spl_switch.c b/arch/arm/mach-sunxi/spl_switch.c new file mode 100644 index 0000000000..1de43c2396 --- /dev/null +++ b/arch/arm/mach-sunxi/spl_switch.c @@ -0,0 +1,64 @@ +/* + * (C) Copyright 2016 ARM Ltd. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <spl.h> + +#include <asm/io.h> +#include <asm/barriers.h> + +static void __noreturn jump_to_image_native(struct spl_image_info *spl_image) +{ + typedef void __noreturn (*image_entry_noargs_t)(void); + + image_entry_noargs_t image_entry = + (image_entry_noargs_t)spl_image->entry_point; + + image_entry(); +} + +static void __noreturn reset_rmr_switch(void) +{ +#ifdef CONFIG_ARM64 + __asm__ volatile ( "mrs x0, RMR_EL3\n\t" + "bic x0, x0, #1\n\t" /* Clear enter-in-64 bit */ + "orr x0, x0, #2\n\t" /* set reset request bit */ + "msr RMR_EL3, x0\n\t" + "isb sy\n\t" + "nop\n\t" + "wfi\n\t" + "b .\n" + ::: "x0"); +#else + __asm__ volatile ( "mrc 15, 0, r0, cr12, cr0, 2\n\t" + "orr r0, r0, #3\n\t" /* request reset in 64 bit */ + "mcr 15, 0, r0, cr12, cr0, 2\n\t" + "isb\n\t" + "nop\n\t" + "wfi\n\t" + "b .\n" + ::: "r0"); +#endif + while (1); /* to avoid a compiler warning about __noreturn */ +} + +void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image) +{ + if (spl_image->arch == IH_ARCH_DEFAULT) { + debug("entering by branch\n"); + jump_to_image_native(spl_image); + } else { + debug("entering by RMR switch\n"); +#ifdef CONFIG_MACH_SUN50I_H6 + writel(spl_image->entry_point, 0x09010040); +#else + writel(spl_image->entry_point, 0x017000a0); +#endif + DSB; + ISB; + reset_rmr_switch(); + } +}