
25 Aug
2012
25 Aug
'12
1:38 a.m.
On Fri, Aug 10, 2012 at 09:59:57AM +0530, Satyanarayana, Sandhya wrote:
This patch updates secure_emif_sdram_config with the same value written to sdram_config during ddr3 initialization.
During suspend/resume, this value is copied into sdram_config. With this, a write to sdram_config at the end of resume sequence which triggers an init sequence can be avoided.
Without this register write in place, the DDR_RESET line goes low for a few cycles during resume which is a violation of the JEDEC spec.
Signed-off-by: Satyanarayana, Sandhya sandhya.satyanarayana@ti.com
Queued to u-boot-ti/master, thanks!
--
Tom