Import the PM8998 and PMI8998 PMIC DTSI files from Linux 6.7-rc3 as well as the common audio codec in preperation for replacing board DTS files with upstream.
Signed-off-by: Caleb Connolly caleb.connolly@linaro.org --- arch/arm/dts/pm8998.dtsi | 130 +++++++++++++++++++++++++++++++++++++++ arch/arm/dts/pmi8998.dtsi | 98 +++++++++++++++++++++++++++++ arch/arm/dts/sdm845-wcd9340.dtsi | 86 ++++++++++++++++++++++++++ 3 files changed, 314 insertions(+)
diff --git a/arch/arm/dts/pm8998.dtsi b/arch/arm/dts/pm8998.dtsi new file mode 100644 index 000000000000..3f82715392c6 --- /dev/null +++ b/arch/arm/dts/pm8998.dtsi @@ -0,0 +1,130 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* Copyright 2018 Google LLC. */ + +#include <dt-bindings/iio/qcom,spmi-vadc.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> +#include <dt-bindings/thermal/thermal.h> + +/ { + thermal-zones { + pm8998-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&pm8998_temp>; + + trips { + pm8998_alert0: pm8998-alert0 { + temperature = <105000>; + hysteresis = <2000>; + type = "passive"; + }; + pm8998_crit: pm8998-crit { + temperature = <125000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; +}; + +&spmi_bus { + pm8998_lsid0: pmic@0 { + compatible = "qcom,pm8998", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8998_pon: pon@800 { + compatible = "qcom,pm8998-pon"; + + reg = <0x800>; + mode-bootloader = <0x2>; + mode-recovery = <0x1>; + + pm8998_pwrkey: pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_POWER>; + }; + + pm8998_resin: resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + status = "disabled"; + }; + }; + + pm8998_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>; + io-channels = <&pm8998_adc ADC5_DIE_TEMP>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + + pm8998_coincell: charger@2800 { + compatible = "qcom,pm8998-coincell", "qcom,pm8941-coincell"; + reg = <0x2800>; + + status = "disabled"; + }; + + pm8998_adc: adc@3100 { + compatible = "qcom,spmi-adc-rev2"; + reg = <0x3100>; + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + + channel@6 { + reg = <ADC5_DIE_TEMP>; + label = "die_temp"; + }; + }; + + pm8998_adc_tm: adc-tm@3400 { + compatible = "qcom,spmi-adc-tm-hc"; + reg = <0x3400>; + interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>; + #thermal-sensor-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + rtc@6000 { + compatible = "qcom,pm8941-rtc"; + reg = <0x6000>, <0x6100>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; + }; + + pm8998_gpios: gpio@c000 { + compatible = "qcom,pm8998-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + gpio-ranges = <&pm8998_gpios 0 0 26>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + }; + + pm8998_lsid1: pmic@1 { + compatible = "qcom,pm8998", "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; diff --git a/arch/arm/dts/pmi8998.dtsi b/arch/arm/dts/pmi8998.dtsi new file mode 100644 index 000000000000..cd3f0790fd42 --- /dev/null +++ b/arch/arm/dts/pmi8998.dtsi @@ -0,0 +1,98 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +&spmi_bus { + pmi8998_lsid0: pmic@2 { + compatible = "qcom,pmi8998", "qcom,spmi-pmic"; + reg = <0x2 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmi8998_charger: charger@1000 { + compatible = "qcom,pmi8998-charger"; + reg = <0x1000>; + + interrupts = <0x2 0x13 0x4 IRQ_TYPE_EDGE_BOTH>, + <0x2 0x12 0x2 IRQ_TYPE_EDGE_BOTH>, + <0x2 0x16 0x1 IRQ_TYPE_EDGE_RISING>, + <0x2 0x13 0x6 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "usb-plugin", + "bat-ov", + "wdog-bark", + "usbin-icl-change"; + + io-channels = <&pmi8998_rradc 3>, + <&pmi8998_rradc 4>; + io-channel-names = "usbin_i", "usbin_v"; + + status = "disabled"; + }; + + pmi8998_gpios: gpio@c000 { + compatible = "qcom,pmi8998-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + gpio-ranges = <&pmi8998_gpios 0 0 14>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pmi8998_rradc: adc@4500 { + compatible = "qcom,pmi8998-rradc"; + reg = <0x4500>; + #io-channel-cells = <1>; + }; + }; + + pmi8998_lsid1: pmic@3 { + compatible = "qcom,pmi8998", "qcom,spmi-pmic"; + reg = <0x3 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + labibb { + compatible = "qcom,pmi8998-lab-ibb"; + + ibb: ibb { + interrupts = <0x3 0xdc 0x2 IRQ_TYPE_EDGE_RISING>, + <0x3 0xdc 0x0 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "sc-err", "ocp"; + }; + + lab: lab { + interrupts = <0x3 0xde 0x1 IRQ_TYPE_EDGE_RISING>, + <0x3 0xde 0x0 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "sc-err", "ocp"; + }; + }; + + pmi8998_lpg: pwm { + compatible = "qcom,pmi8998-lpg"; + + #address-cells = <1>; + #size-cells = <0>; + #pwm-cells = <2>; + + status = "disabled"; + }; + + pmi8998_flash: led-controller@d300 { + compatible = "qcom,pmi8998-flash-led", "qcom,spmi-flash-led"; + reg = <0xd300>; + status = "disabled"; + }; + + pmi8998_wled: leds@d800 { + compatible = "qcom,pmi8998-wled"; + reg = <0xd800>, <0xd900>; + interrupts = <0x3 0xd8 0x1 IRQ_TYPE_EDGE_RISING>, + <0x3 0xd8 0x2 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "ovp", "short"; + label = "backlight"; + + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/dts/sdm845-wcd9340.dtsi b/arch/arm/dts/sdm845-wcd9340.dtsi new file mode 100644 index 000000000000..c15d48860646 --- /dev/null +++ b/arch/arm/dts/sdm845-wcd9340.dtsi @@ -0,0 +1,86 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SDM845 SoC device tree source + * + * Copyright (c) 2018, The Linux Foundation. All rights reserved. + */ + +&slim { + status = "okay"; + + slim@1 { + reg = <1>; + #address-cells = <2>; + #size-cells = <0>; + + wcd9340_ifd: ifd@0,0 { + compatible = "slim217,250"; + reg = <0 0>; + }; + + wcd9340: codec@1,0 { + compatible = "slim217,250"; + reg = <1 0>; + slim-ifc-dev = <&wcd9340_ifd>; + + #sound-dai-cells = <1>; + + interrupts-extended = <&tlmm 54 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + clock-names = "extclk"; + clocks = <&rpmhcc RPMH_LN_BB_CLK2>; + + #clock-cells = <0>; + clock-frequency = <9600000>; + clock-output-names = "mclk"; + + pinctrl-0 = <&wcd_intr_default>; + pinctrl-names = "default"; + + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <1800000>; + qcom,micbias4-microvolt = <1800000>; + + #address-cells = <1>; + #size-cells = <1>; + + wcdgpio: gpio-controller@42 { + compatible = "qcom,wcd9340-gpio"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x42 0x2>; + }; + + swm: swm@c85 { + compatible = "qcom,soundwire-v1.3.0"; + reg = <0xc85 0x40>; + interrupts-extended = <&wcd9340 20>; + + qcom,dout-ports = <6>; + qcom,din-ports = <2>; + qcom,ports-sinterval-low = /bits/ 8 <0x07 0x1f 0x3f 0x7 0x1f 0x3f 0x0f 0x0f>; + qcom,ports-offset1 = /bits/ 8 <0x01 0x02 0x0c 0x6 0x12 0x0d 0x07 0x0a>; + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x1f 0x00 0x00 0x1f 0x00 0x00>; + + #sound-dai-cells = <1>; + clocks = <&wcd9340>; + clock-names = "iface"; + #address-cells = <2>; + #size-cells = <0>; + }; + }; + }; +}; + +&tlmm { + wcd_intr_default: wcd-intr-default-state { + pins = "gpio54"; + function = "gpio"; + + bias-pull-down; + drive-strength = <2>; + }; +};