This patch adds support for EMMC booting on SMDK5250.
Signed-off-by: Amar amarendra.xt@samsung.com --- board/samsung/smdk5250/clock_init.c | 18 +++++++++++++ board/samsung/smdk5250/clock_init.h | 5 ++++ board/samsung/smdk5250/spl_boot.c | 52 ++++++++++++++++++++++++++++++++----- 3 files changed, 69 insertions(+), 6 deletions(-)
diff --git a/board/samsung/smdk5250/clock_init.c b/board/samsung/smdk5250/clock_init.c index c009ae5..90d2199 100644 --- a/board/samsung/smdk5250/clock_init.c +++ b/board/samsung/smdk5250/clock_init.c @@ -28,6 +28,7 @@ #include <asm/arch/clk.h> #include <asm/arch/clock.h> #include <asm/arch/spl.h> +#include <asm/arch/dwmmc.h>
#include "clock_init.h" #include "setup.h" @@ -664,3 +665,20 @@ void clock_init_dp_clock(void) /* We run DP at 267 Mhz */ setbits_le32(&clk->div_disp1_0, CLK_DIV_DISP1_0_FIMD1); } + +/* + * Set clock divisor value for booting from emmc. + * Set DWMMC channel-0 clk div to operate mmc0 device at 50MHz. + */ +void emmc_boot_clk_div_set(void) +{ + struct exynos5_clock *clk = (struct exynos5_clock *)EXYNOS5_CLOCK_BASE; + unsigned int addr; + unsigned int div_mmc; + + addr = (unsigned int) &clk->div_fsys1; + + div_mmc = readl(addr) & ~FSYS1_MMC0_DIV_MASK; + div_mmc |= FSYS1_MMC0_DIV_VAL; + writel(div_mmc, addr); +} diff --git a/board/samsung/smdk5250/clock_init.h b/board/samsung/smdk5250/clock_init.h index f751bcb..9b156f7 100644 --- a/board/samsung/smdk5250/clock_init.h +++ b/board/samsung/smdk5250/clock_init.h @@ -146,4 +146,9 @@ struct mem_timings *clock_get_mem_timings(void); * Initialize clock for the device */ void system_clock_init(void); + +/* + * Set clock divisor value for booting from emmc. + */ +void emmc_boot_clk_div_set(void); #endif diff --git a/board/samsung/smdk5250/spl_boot.c b/board/samsung/smdk5250/spl_boot.c index d8f3c1e..e94677b 100644 --- a/board/samsung/smdk5250/spl_boot.c +++ b/board/samsung/smdk5250/spl_boot.c @@ -23,16 +23,41 @@ #include<common.h> #include<config.h>
+#include <asm/arch-exynos/dmc.h> +#include <asm/arch/clock.h> +#include <asm/arch/clk.h> + +#include "clock_init.h" + +/* Index into irom ptr table */ +enum index { + MMC_INDEX, + EMMC44_INDEX, + EMMC44_END_INDEX, + SPI_INDEX, +}; + +/* IROM Function Pointers Table */ +void (*irom_ptr_table[])(void) = { + [MMC_INDEX] = (void *)0x02020030, /* iROM Function Pointer + -SDMMC boot */ + [EMMC44_INDEX] = (void *)0x02020044, /* iROM Function Pointer + -EMMC 4.4 boot */ + [EMMC44_END_INDEX] = (void *)0x02020048,/* iROM Function Pointer + -EMMC 4.4 end boot opration */ + [SPI_INDEX] = (void *)0x02020058, /* iROM Function Pointer + -SPI boot */ + }; + enum boot_mode { BOOT_MODE_MMC = 4, BOOT_MODE_SERIAL = 20, + BOOT_MODE_EMMC = 8, /* EMMC4.4 */ /* Boot based on Operating Mode pin settings */ BOOT_MODE_OM = 32, BOOT_MODE_USB, /* Boot using USB download */ };
- typedef u32 (*spi_copy_func_t)(u32 offset, u32 nblock, u32 dst); - /* * Copy U-boot from mmc to RAM: * COPY_BL2_FNPTR_ADDR: Address in iRAM, which Contains @@ -40,23 +65,38 @@ enum boot_mode { */ void copy_uboot_to_ram(void) { - spi_copy_func_t spi_copy; enum boot_mode bootmode; - u32 (*copy_bl2)(u32, u32, u32); + u32 (*spi_copy)(u32 offset, u32 nblock, u32 dst); + u32 (*copy_bl2)(u32 offset, u32 nblock, u32 dst); + u32 (*copy_bl2_from_emmc)(u32 nblock, u32 dst); + void (*end_bootop_from_emmc)(void);
bootmode = readl(EXYNOS5_POWER_BASE) & OM_STAT;
switch (bootmode) { case BOOT_MODE_SERIAL: - spi_copy = *(spi_copy_func_t *)EXYNOS_COPY_SPI_FNPTR_ADDR; + spi_copy = (void *) *(u32 *)irom_ptr_table[SPI_INDEX]; spi_copy(SPI_FLASH_UBOOT_POS, CONFIG_BL2_SIZE, CONFIG_SYS_TEXT_BASE); break; case BOOT_MODE_MMC: - copy_bl2 = (void *) *(u32 *)COPY_BL2_FNPTR_ADDR; + copy_bl2 = (void *) *(u32 *)irom_ptr_table[MMC_INDEX]; copy_bl2(BL2_START_OFFSET, BL2_SIZE_BLOC_COUNT, CONFIG_SYS_TEXT_BASE); break; + case BOOT_MODE_EMMC: + emmc_boot_clk_div_set(); + + copy_bl2_from_emmc = + (void *) *(u32 *)irom_ptr_table[EMMC44_INDEX]; + end_bootop_from_emmc = + (void *) *(u32 *)irom_ptr_table[EMMC44_END_INDEX]; + + copy_bl2_from_emmc(BL2_SIZE_BLOC_COUNT, CONFIG_SYS_TEXT_BASE); + end_bootop_from_emmc(); + + break; + default: break; }