New NOR Flash board support and remove network setting from config file.
Signed-off-by: Nobuhiro Iwamatsu iwamatsu.nobuhiro@renesas.com --- include/configs/r7780mp.h | 41 +++++++++++++++++++++++------------------ 1 files changed, 23 insertions(+), 18 deletions(-)
diff --git a/include/configs/r7780mp.h b/include/configs/r7780mp.h index 4e89580..1668ba7 100644 --- a/include/configs/r7780mp.h +++ b/include/configs/r7780mp.h @@ -1,7 +1,7 @@ /* * Configuation settings for the Renesas R7780MP board * - * Copyright (C) 2007 Nobuhiro Iwamatsu iwamatsu@nigauri.org + * Copyright (C) 2007,2008 Nobuhiro Iwamatsu iwamatsu@nigauri.org * Copyright (C) 2008 Yusuke Goda goda.yusuke@renesas.com * * See file CREDITS for list of people who contributed to this @@ -31,7 +31,8 @@ #define CONFIG_SH4A 1 #define CONFIG_CPU_SH7780 1 #define CONFIG_R7780MP 1 -#define __LITTLE_ENDIAN 1 +#define CFG_R7780MP_OLD_FLASH 1 +#define __LITTLE_ENDIAN__ 1
/* * Command line configuration. @@ -59,12 +60,6 @@ /* check for keypress on bootdelay==0 */ /*#define CONFIG_ZERO_BOOTDELAY_CHECK*/
-/* Network setting */ -#define CONFIG_NETMASK 255.0.0.0 -#define CONFIG_IPADDR 10.0.192.82 -#define CONFIG_SERVERIP 10.0.0.1 -#define CONFIG_GATEWAYIP 10.0.0.1 - #define CFG_SDRAM_BASE (0x08000000) #define CFG_SDRAM_SIZE (128 * 1024 * 1024)
@@ -80,22 +75,30 @@ #define CFG_MEMTEST_START (CFG_SDRAM_BASE) #define CFG_MEMTEST_END (TEXT_BASE - 0x100000)
-/* NOR Flash (S29PL127J60TFI130) */ +/* Flash board support */ #define CFG_FLASH_BASE (0xA0000000) -#define CFG_FLASH_CFI_WIDTH FLASH_CFI_32BIT -#define CFG_MAX_FLASH_BANKS (2) -#define CFG_MAX_FLASH_SECT 270 -#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE,\ +#ifdef CFG_R7780MP_OLD_FLASH +/* NOR Flash (S29PL127J60TFI130) */ +# define CFG_FLASH_CFI_WIDTH FLASH_CFI_32BIT +# define CFG_MAX_FLASH_BANKS (2) +# define CFG_MAX_FLASH_SECT 270 +# define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE,\ CFG_FLASH_BASE + 0x100000,\ CFG_FLASH_BASE + 0x400000,\ CFG_FLASH_BASE + 0x700000, } +#else /* CFG_R7780MP_OLD_FLASH */ +/* NOR Flash (Spantion S29GL256P) */ +# define CFG_MAX_FLASH_BANKS (1) +# define CFG_MAX_FLASH_SECT 256 +# define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } +#endif /* CFG_R7780MP_OLD_FLASH */
#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 4 * 1024 * 1024) /* Address of u-boot image in Flash */ #define CFG_MONITOR_BASE (CFG_FLASH_BASE) -#define CFG_MONITOR_LEN (112 * 1024) +#define CFG_MONITOR_LEN (256 * 1024) /* Size of DRAM reserved for malloc() use */ -#define CFG_MALLOC_LEN (256 * 1024) +#define CFG_MALLOC_LEN (1204 * 1024)
/* size in bytes reserved for initial data */ #define CFG_GBL_DATA_SIZE (256) @@ -110,7 +113,7 @@ #define CFG_FLASH_EMPTY_INFO
#define CFG_ENV_IS_IN_FLASH -#define CFG_ENV_SECT_SIZE (16 * 1024) +#define CFG_ENV_SECT_SIZE (256 * 1024) #define CFG_ENV_SIZE (CFG_ENV_SECT_SIZE) #define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) #define CFG_FLASH_ERASE_TOUT 120000 @@ -141,8 +144,10 @@ #endif /* CONFIG_CMD_PCI */
#if defined(CONFIG_CMD_NET) -/* #define CONFIG_NET_MULTI - #define CONFIG_RTL8169 */ +/* +#define CONFIG_NET_MULTI +#define CONFIG_RTL8169 +*/ /* AX88696L Support(NE2000 base chip) */ #define CONFIG_DRIVER_NE2000 #define CONFIG_DRIVER_AX88796L