This board has not been converted to CONFIG_DM_MMC by the deadline of v2019.04, which is almost two years ago. In addition there are other DM migrations it is also missing. Remove it.
Cc: Otavio Salvador otavio@ossystems.com.br Signed-off-by: Tom Rini trini@konsulko.com --- arch/arm/mach-imx/mx6/Kconfig | 6 -- board/warp/Kconfig | 9 -- board/warp/MAINTAINERS | 6 -- board/warp/Makefile | 6 -- board/warp/README | 56 ----------- board/warp/imximage.cfg | 123 ------------------------- board/warp/warp.c | 169 ---------------------------------- configs/warp_defconfig | 49 ---------- include/configs/warp.h | 145 ----------------------------- 9 files changed, 569 deletions(-) delete mode 100644 board/warp/Kconfig delete mode 100644 board/warp/MAINTAINERS delete mode 100644 board/warp/Makefile delete mode 100644 board/warp/README delete mode 100644 board/warp/imximage.cfg delete mode 100644 board/warp/warp.c delete mode 100644 configs/warp_defconfig delete mode 100644 include/configs/warp.h
diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig index 737e305f29f1..410afed075c8 100644 --- a/arch/arm/mach-imx/mx6/Kconfig +++ b/arch/arm/mach-imx/mx6/Kconfig @@ -642,11 +642,6 @@ config TARGET_WANDBOARD select BOARD_LATE_INIT select SUPPORT_SPL
-config TARGET_WARP - bool "WaRP" - depends on MX6SL - select BOARD_LATE_INIT - config TARGET_XPRESS bool "CCV xPress" depends on MX6UL @@ -746,7 +741,6 @@ source "board/k+p/kp_imx6q_tpc/Kconfig" source "board/udoo/Kconfig" source "board/udoo/neo/Kconfig" source "board/wandboard/Kconfig" -source "board/warp/Kconfig" source "board/BuR/brppt2/Kconfig"
endif diff --git a/board/warp/Kconfig b/board/warp/Kconfig deleted file mode 100644 index dc0263631906..000000000000 --- a/board/warp/Kconfig +++ /dev/null @@ -1,9 +0,0 @@ -if TARGET_WARP - -config SYS_BOARD - default "warp" - -config SYS_CONFIG_NAME - default "warp" - -endif diff --git a/board/warp/MAINTAINERS b/board/warp/MAINTAINERS deleted file mode 100644 index ee2114d08235..000000000000 --- a/board/warp/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -WaRP BOARD -M: Otavio Salvador otavio@ossystems.com.br -S: Maintained -F: board/warp/ -F: include/configs/warp.h -F: configs/warp_defconfig diff --git a/board/warp/Makefile b/board/warp/Makefile deleted file mode 100644 index 3a2373d7bf5b..000000000000 --- a/board/warp/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# Copyright (C) 2014 O.S. Systems Software LTDA. -# Copyright (C) 2014 Kynetics LLC. -# Copyright (C) 2014 Revolution Robotics, Inc. - -obj-y := warp.o diff --git a/board/warp/README b/board/warp/README deleted file mode 100644 index 3cfd22ec761d..000000000000 --- a/board/warp/README +++ /dev/null @@ -1,56 +0,0 @@ -How to Update U-Boot on Warp board ----------------------------------- - -Required software on the host PC: - -- imx_usb_loader: https://github.com/boundarydevices/imx_usb_loader - -- dfu-util: http://dfu-util.sourceforge.net/releases/ - -Build U-Boot for Warp: - -$ make mrproper -$ make warp_config -$ make - -This will generate the U-Boot binary called u-boot.imx. - -Put warp board in USB download mode - -Connect a USB to serial adapter between the host PC and warp - -Connect a USB cable between the OTG warp port and the host PC - -Open a terminal program such as minicom - -Copy u-boot.imx to the imx_usb_loader folder. - -Load u-boot.imx via USB: - -$ sudo ./imx_usb u-boot.imx - -Then U-Boot should start and its messages will appear in the console program. - -Use the default environment variables: - -=> env default -f -a -=> saveenv - -Run the DFU command: -=> dfu 0 mmc 0 - -Transfer u-boot.imx that will be flashed into the eMMC: - -$ sudo dfu-util -D u-boot.imx -a boot - -Then on the U-Boot prompt the following message should be seen after a -successful upgrade: - -#DOWNLOAD ... OK -Ctrl+C to exit ... - -Remove power from the warp board. - -Put warp board into normal boot mode - -Power up the board and the new updated U-Boot should boot from eMMC diff --git a/board/warp/imximage.cfg b/board/warp/imximage.cfg deleted file mode 100644 index 619f6aa7b066..000000000000 --- a/board/warp/imximage.cfg +++ /dev/null @@ -1,123 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2013 Freescale Semiconductor, Inc. - * - * Refer doc/imx/mkimage/imximage.txt for more details about how-to configure - * and create imximage boot image - * - * The syntax is taken as close as possible with the kwbimage - */ -#define __ASSEMBLY__ -#include <config.h> - -/* image version */ - -IMAGE_VERSION 2 - -/* - * Boot Device : one of - * spi, sd (the board has no nand neither onenand) - */ - -BOOT_FROM sd - -/* - * Secure boot support - */ -#ifdef CONFIG__IMX_HAB -CSF CONFIG_CSF_SIZE -#endif - -/* - * Device Configuration Data (DCD) - * - * Each entry must have the format: - * Addr-type Address Value - * - * where: - * Addr-type register length (1,2 or 4 bytes) - * Address absolute address of the register - * value value to be stored in the register - */ -DATA 4 0x020c4018 0x00260324 - -DATA 4 0x020c4068 0xffffffff -DATA 4 0x020c406c 0xffffffff -DATA 4 0x020c4070 0xffffffff -DATA 4 0x020c4074 0xffffffff -DATA 4 0x020c4078 0xffffffff -DATA 4 0x020c407c 0xffffffff -DATA 4 0x020c4080 0xffffffff - -DATA 4 0x020e0344 0x00003030 -DATA 4 0x020e0348 0x00003030 -DATA 4 0x020e034c 0x00003030 -DATA 4 0x020e0350 0x00003030 -DATA 4 0x020e030c 0x00000030 -DATA 4 0x020e0310 0x00000030 -DATA 4 0x020e0314 0x00000030 -DATA 4 0x020e0318 0x00000030 -DATA 4 0x020e0300 0x00000030 -DATA 4 0x020e031c 0x00000030 -DATA 4 0x020e0338 0x00000028 -DATA 4 0x020e0320 0x00000030 -DATA 4 0x020e032c 0x00000000 -DATA 4 0x020e033c 0x00000008 -DATA 4 0x020e0340 0x00000008 -DATA 4 0x020e05c4 0x00000030 -DATA 4 0x020e05cc 0x00000030 -DATA 4 0x020e05d4 0x00000030 -DATA 4 0x020e05d8 0x00000030 -DATA 4 0x020e05ac 0x00000030 -DATA 4 0x020e05c8 0x00000030 -DATA 4 0x020e05b0 0x00020000 -DATA 4 0x020e05b4 0x00000000 -DATA 4 0x020e05c0 0x00020000 -DATA 4 0x020e05d0 0x00080000 - -DATA 4 0x021b001c 0x00008000 -DATA 4 0x021b085c 0x1b4700c7 -DATA 4 0x021b0800 0xa1390003 -DATA 4 0x021b0890 0x00400000 -DATA 4 0x021b08b8 0x00000800 -DATA 4 0x021b081c 0x33333333 -DATA 4 0x021b0820 0x33333333 -DATA 4 0x021b0824 0x33333333 -DATA 4 0x021b0828 0x33333333 -DATA 4 0x021b082c 0xf3333333 -DATA 4 0x021b0830 0xf3333333 -DATA 4 0x021b0834 0xf3333333 -DATA 4 0x021b0838 0xf3333333 -DATA 4 0x021b0848 0x4241444a -DATA 4 0x021b0850 0x3030312b -DATA 4 0x021b083c 0x20000000 -DATA 4 0x021b0840 0x00000000 -DATA 4 0x021b08c0 0x24911492 -DATA 4 0x021b08b8 0x00000800 -DATA 4 0x021b000c 0x33374133 -DATA 4 0x021b0004 0x00020024 -DATA 4 0x021b0010 0x00100A82 -DATA 4 0x021b0014 0x00000093 -DATA 4 0x021b0018 0x00001688 -DATA 4 0x021b002c 0x0f9f26d2 -DATA 4 0x021b0030 0x009f0e10 -DATA 4 0x021b0038 0x00190778 -DATA 4 0x021b0008 0x00000000 -DATA 4 0x021b0040 0x0000004f -DATA 4 0x021b0000 0x83110000 -DATA 4 0x021b001c 0x003f8030 -DATA 4 0x021b001c 0xff0a8030 -DATA 4 0x021b001c 0x82018030 -DATA 4 0x021b001c 0x04028030 -DATA 4 0x021b001c 0x02038030 -DATA 4 0x021b001c 0xff0a8038 -DATA 4 0x021b001c 0x82018038 -DATA 4 0x021b001c 0x04028038 -DATA 4 0x021b001c 0x02038038 -DATA 4 0x021b0800 0xa1310003 -DATA 4 0x021b0020 0x00001800 -DATA 4 0x021b0818 0x00000000 -DATA 4 0x021b08b8 0x00000800 -DATA 4 0x021b0004 0x00025564 -DATA 4 0x021b0404 0x00011006 -DATA 4 0x021b001c 0x00000000 diff --git a/board/warp/warp.c b/board/warp/warp.c deleted file mode 100644 index 85da9c1bd435..000000000000 --- a/board/warp/warp.c +++ /dev/null @@ -1,169 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2014, 2015 O.S. Systems Software LTDA. - * Copyright (C) 2014 Kynetics LLC. - * Copyright (C) 2014 Revolution Robotics, Inc. - * - * Author: Otavio Salvador otavio@ossystems.com.br - */ - -#include <init.h> -#include <asm/arch/clock.h> -#include <asm/arch/iomux.h> -#include <asm/arch/imx-regs.h> -#include <asm/arch/mx6-pins.h> -#include <asm/arch/sys_proto.h> -#include <asm/gpio.h> -#include <asm/mach-imx/iomux-v3.h> -#include <asm/mach-imx/mxc_i2c.h> -#include <asm/io.h> -#include <linux/sizes.h> -#include <common.h> -#include <watchdog.h> -#include <fsl_esdhc_imx.h> -#include <i2c.h> -#include <mmc.h> -#include <usb.h> -#include <power/pmic.h> -#include <power/max77696_pmic.h> - -DECLARE_GLOBAL_DATA_PTR; - -#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ - PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \ - PAD_CTL_SRE_FAST | PAD_CTL_HYS | \ - PAD_CTL_LVE) - -#define USDHC_PAD_CTRL (PAD_CTL_PUS_22K_UP | \ - PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm | \ - PAD_CTL_SRE_FAST | PAD_CTL_HYS | \ - PAD_CTL_LVE) - -#define I2C_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ - PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ - PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \ - PAD_CTL_ODE | PAD_CTL_SRE_FAST) - -int dram_init(void) -{ - gd->ram_size = imx_ddr_size(); - - return 0; -} - -static void setup_iomux_uart(void) -{ - static iomux_v3_cfg_t const uart1_pads[] = { - MX6_PAD_UART1_TXD__UART1_TXD | MUX_PAD_CTRL(UART_PAD_CTRL), - MX6_PAD_UART1_RXD__UART1_RXD | MUX_PAD_CTRL(UART_PAD_CTRL), - }; - - imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads)); -} - -static struct fsl_esdhc_cfg usdhc_cfg[1] = { - {USDHC2_BASE_ADDR, 0, 0, 0, 1}, -}; - -int board_mmc_getcd(struct mmc *mmc) -{ - return 1; /* Assume boot SD always present */ -} - -int board_mmc_init(struct bd_info *bis) -{ - static iomux_v3_cfg_t const usdhc2_pads[] = { - MX6_PAD_SD2_CLK__USDHC2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD2_CMD__USDHC2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD2_RST__USDHC2_RST | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD2_DAT0__USDHC2_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD2_DAT1__USDHC2_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD2_DAT2__USDHC2_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD2_DAT3__USDHC2_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD2_DAT4__USDHC2_DAT4 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD2_DAT5__USDHC2_DAT5 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD2_DAT6__USDHC2_DAT6 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD2_DAT7__USDHC2_DAT7 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - }; - - imx_iomux_v3_setup_multiple_pads(usdhc2_pads, ARRAY_SIZE(usdhc2_pads)); - - usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK); - return fsl_esdhc_initialize(bis, &usdhc_cfg[0]); -} - -int board_usb_phy_mode(int port) -{ - return USB_INIT_DEVICE; -} - -/* I2C1 for PMIC */ -#define I2C_PMIC 0 -#define PC MUX_PAD_CTRL(I2C_PAD_CTRL) -struct i2c_pads_info i2c_pad_info1 = { - .sda = { - .i2c_mode = MX6_PAD_I2C1_SDA__I2C1_SDA | PC, - .gpio_mode = MX6_PAD_I2C1_SDA__GPIO_3_13 | PC, - .gp = IMX_GPIO_NR(3, 13), - }, - .scl = { - .i2c_mode = MX6_PAD_I2C1_SCL__I2C1_SCL | PC, - .gpio_mode = MX6_PAD_I2C1_SCL__GPIO_3_12 | PC, - .gp = IMX_GPIO_NR(3, 12), - }, -}; - -int power_init_board(void) -{ - struct pmic *p; - int ret; - unsigned int reg; - - ret = power_max77696_init(I2C_PMIC); - if (ret) - return ret; - - p = pmic_get("MAX77696"); - if (!p) - return -EINVAL; - - ret = pmic_reg_read(p, CID, ®); - if (ret) - return ret; - - printf("PMIC: MAX77696 detected, rev=0x%x\n", reg); - - return pmic_probe(p); -} - -int board_early_init_f(void) -{ - setup_iomux_uart(); - return 0; -} - -int board_init(void) -{ - /* address of boot parameters */ - gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; - - setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1); - - return 0; -} - -int board_late_init(void) -{ -#ifdef CONFIG_HW_WATCHDOG - hw_watchdog_init(); -#endif - - return 0; -} - -int checkboard(void) -{ - puts("Board: WaRP Board\n"); - - return 0; -} diff --git a/configs/warp_defconfig b/configs/warp_defconfig deleted file mode 100644 index 34acc9e6c844..000000000000 --- a/configs/warp_defconfig +++ /dev/null @@ -1,49 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_MX6=y -CONFIG_SYS_TEXT_BASE=0x87800000 -CONFIG_NR_DRAM_BANKS=1 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0x60000 -CONFIG_MX6SL=y -CONFIG_TARGET_WARP=y -# CONFIG_CMD_BMODE is not set -CONFIG_SUPPORT_RAW_INITRD=y -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/warp/imximage.cfg" -CONFIG_BOOTDELAY=3 -CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y -CONFIG_CMD_DFU=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_PART=y -CONFIG_CMD_USB=y -CONFIG_CMD_USB_MASS_STORAGE=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_CACHE=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_EXT4_WRITE=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_MMC=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -# CONFIG_NET is not set -CONFIG_BOUNCE_BUFFER=y -CONFIG_DFU_MMC=y -CONFIG_SUPPORT_EMMC_BOOT=y -CONFIG_FSL_USDHC=y -CONFIG_MXC_UART=y -CONFIG_USB=y -CONFIG_USB_STORAGE=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_MANUFACTURER="FSL" -CONFIG_USB_GADGET_VENDOR_NUM=0x0525 -CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 -CONFIG_CI_UDC=y -CONFIG_USB_GADGET_DOWNLOAD=y -CONFIG_WATCHDOG_TIMEOUT_MSECS=30000 -CONFIG_IMX_WATCHDOG=y -CONFIG_OF_LIBFDT=y diff --git a/include/configs/warp.h b/include/configs/warp.h deleted file mode 100644 index f17eea117f3a..000000000000 --- a/include/configs/warp.h +++ /dev/null @@ -1,145 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2014 O.S. Systems Software LTDA. - * Copyright (C) 2014 Kynetics LLC. - * Copyright (C) 2014 Revolution Robotics, Inc. - * - * Author: Otavio Salvador otavio@ossystems.com.br - * - * Configuration settings for the WaRP Board - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include "mx6_common.h" - -/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (35 * SZ_1M) /* Increase due to DFU */ - -#define CONFIG_MXC_UART_BASE UART1_IPS_BASE_ADDR - -/* MMC Configs */ -#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR -#define CONFIG_SYS_FSL_ESDHC_HAS_DDR_MODE - -/* Watchdog */ - -/* Physical Memory Map */ -#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE - -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - -/* VDD voltage 1.65 - 1.95 */ -#define CONFIG_SYS_SD_VOLTAGE 0x00000080 - -/* USB Configs */ -#ifdef CONFIG_CMD_USB -#define CONFIG_EHCI_HCD_INIT_AFTER_RESET -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#define CONFIG_MXC_USB_FLAGS 0 -#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 /* Only OTG2 port enabled */ -#endif - -#define CONFIG_USBD_HS - -#define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_16M -#define DFU_DEFAULT_POLL_TIMEOUT 300 - -/* I2C Configs */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_MXC -#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ -#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ -#define CONFIG_SYS_I2C_SPEED 100000 - -/* PMIC */ -#define CONFIG_POWER -#define CONFIG_POWER_I2C -#define CONFIG_POWER_MAX77696 - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "script=boot.scr\0" \ - "image=zImage\0" \ - "console=ttymxc0\0" \ - "fdt_high=0xffffffff\0" \ - "initrd_high=0xffffffff\0" \ - "fdt_file=imx6sl-warp.dtb\0" \ - "fdt_addr=0x88000000\0" \ - "initrd_addr=0x83800000\0" \ - "boot_fdt=try\0" \ - "ip_dyn=yes\0" \ - "mmcdev=0\0" \ - "mmcpart=1\0" \ - "finduuid=part uuid mmc 0:2 uuid\0" \ - "dfu_alt_info=boot raw 0x2 0x400 mmcpart 1\0" \ - "mmcargs=setenv bootargs console=${console},${baudrate} " \ - "root=PARTUUID=${uuid} rootwait rw\0" \ - "loadbootscript=" \ - "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ - "bootscript=echo Running bootscript from mmc ...; " \ - "source\0" \ - "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ - "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ - "mmcboot=echo Booting from mmc ...; " \ - "run finduuid; " \ - "run mmcargs; " \ - "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ - "if run loadfdt; then " \ - "bootz ${loadaddr} - ${fdt_addr}; " \ - "else " \ - "if test ${boot_fdt} = try; then " \ - "bootz; " \ - "else " \ - "echo WARN: Cannot load the DT; " \ - "fi; " \ - "fi; " \ - "else " \ - "bootz; " \ - "fi;\0" \ - "netargs=setenv bootargs console=${console},${baudrate} " \ - "root=/dev/nfs " \ - "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ - "netboot=echo Booting from net ...; " \ - "run netargs; " \ - "if test ${ip_dyn} = yes; then " \ - "setenv get_cmd dhcp; " \ - "else " \ - "setenv get_cmd tftp; " \ - "fi; " \ - "${get_cmd} ${image}; " \ - "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ - "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ - "bootz ${loadaddr} - ${fdt_addr}; " \ - "else " \ - "if test ${boot_fdt} = try; then " \ - "bootz; " \ - "else " \ - "echo WARN: Cannot load the DT; " \ - "fi; " \ - "fi; " \ - "else " \ - "bootz; " \ - "fi;\0" - -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev};" \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loadimage; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "fi; " \ - "else run netboot; fi" - -#endif /* __CONFIG_H */