These are standard across gigabit phys. These mostly extend the auto-negotiation information with gigabit fields.
Signed-off-by: Trent Piepho tpiepho@impinj.com --- cmd/mii.c | 34 +++++++++++++++++++++++++++++----- 1 file changed, 29 insertions(+), 5 deletions(-)
diff --git a/cmd/mii.c b/cmd/mii.c index fcc677b485..1cb0904689 100644 --- a/cmd/mii.c +++ b/cmd/mii.c @@ -91,6 +91,28 @@ static const MII_field_desc_t reg_5_desc_tbl[] = { { 4, 0, 0x1f, "partner selector" }, };
+static const MII_field_desc_t reg_9_desc_tbl[] = { + { 15, 13, 0x07, "test mode" }, + { 12, 12, 0x01, "manual master/slave enable" }, + { 11, 11, 0x01, "manual master/slave value" }, + { 10, 10, 0x01, "multi/single port" }, + { 9, 9, 0x01, "1000BASE-T full duplex able" }, + { 8, 8, 0x01, "1000BASE-T half duplex able" }, + { 7, 7, 0x01, "automatic TDR on link down" }, + { 6, 6, 0x7f, "(reserved)" }, +}; + +static const MII_field_desc_t reg_10_desc_tbl[] = { + { 15, 15, 0x01, "master/slave config fault" }, + { 14, 14, 0x01, "master/slave config result" }, + { 13, 13, 0x01, "local receiver status OK" }, + { 12, 12, 0x01, "remote receiver status OK" }, + { 11, 11, 0x01, "1000BASE-T full duplex able" }, + { 10, 10, 0x01, "1000BASE-T half duplex able" }, + { 9, 8, 0x03, "(reserved)" }, + { 7, 0, 0xff, "1000BASE-T idle error counter"}, +}; + typedef struct _MII_reg_desc_t { ushort regno; const MII_field_desc_t *pdesc; @@ -111,6 +133,10 @@ static const MII_reg_desc_t mii_reg_desc_tbl[] = { "Autonegotiation advertisement register" }, { MII_LPA, reg_5_desc_tbl, ARRAY_SIZE(reg_5_desc_tbl), "Autonegotiation partner abilities register" }, + { MII_CTRL1000, reg_9_desc_tbl, ARRAY_SIZE(reg_9_desc_tbl), + "1000BASE-T control register" }, + { MII_STAT1000, reg_10_desc_tbl, ARRAY_SIZE(reg_10_desc_tbl), + "1000BASE-T status register" }, };
static void dump_reg( @@ -390,12 +416,10 @@ static int do_mii(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) } } } else if (strncmp(op, "du", 2) == 0) { - ushort regs[6]; + ushort regs[MII_STAT1000 + 1]; /* Last reg is 0x0a */ int ok = 1; - if ((reglo > 5) || (reghi > 5)) { - printf( - "The MII dump command only formats the " - "standard MII registers, 0-5.\n"); + if (reglo > MII_STAT1000 || reghi > MII_STAT1000) { + printf("The MII dump command only formats the standard MII registers, 0-5, 9-a.\n"); return 1; } for (addr = addrlo; addr <= addrhi; addr++) {